Help to get an image to scale and move?

Similar Questions

• For loop in place, images to scale and move

  I have an image which I enclose, is the white part of the image (I recorded it on a black background so it is easy to see, but it's on a transparent background, saved as a gif file and imported to flash). When my for loop runs, I'm trying to put this image on stage by programming, but it seems that it is not doing things. It will scale the image and positioned some in all directions

  I wanted the images (8) appears in 2 columns each staggered regularly, but he fails to do so. The clip holds the image below. Since it is an irregular shape, it also seems to make the edges really rough.

  (1) why is the loop generating these images in all directions like this?

  (2) it would be more ideal to draw this shape with flash, rather than by using a gif image? Such a form is even possible to draw?

  This is the code:

  Fl.transitions import. *;
  Fl.transitions.easing import. *;
  import flash.events.TimerEvent;

  var imageLoader:Loader;

  var xmlData:XML;

  var bucketItem:MovieClip; They hold the attached picture
  var bucketHor:MovieClip;

  placeBuckets();

  public function set {loadedXML(xml:XML):void}
  xmlData = xml;
  }

  function placeBuckets (): void {}
  var all: Number = 50;
  After var: number = 115;
  
  var bucketCount:XMLList = xmlData.product;
  for (var u: uint = 0; u < bucketCount.length (); u ++) {}
  bucketItem = new bucket();
  bucketHor = new bucketr();
  
  If (bucketCount.country.text ([u]) == 'USA') {}
  1st = bucketItem.y;
  bucketItem.x = 100;
  var bucketTween:Tween = new Tween (bucketItem, "x", Regular.easeOut, bucketItem.x, 0, 0.5, true);
  } else {}
  bucketHor.y = after;
  bucketHor.x = 300;
  bucketItem.scaleX = - 1;
  var buckettwoTween:Tween = new Tween (bucketItem, "x", Regular.easeOut, bucketItem.x, 0, 0.5, true);
  }
  var bucketImgTrans = new TransitionManager (bucketItem);
  bucketImgTrans.startTransition ({type: Zoom, direction: Transition.IN, duration: 3, easing:Strong.easeOut});})
  var bucketImgTransH = new TransitionManager (bucketHor);
  bucketImgTransH.startTransition ({type: Zoom, direction: Transition.IN, duration: 3, easing:Strong.easeOut});})
  trace (bucketItem.y);

  trace (bucketHor.y);
  addChildAt (bucketItem, 0);
  addChildAt (bucketHor, 0);
  After = (after + 200) - 115;
  1st (1st + 130) = - 50;
  }
  }

  It's the Stmt trace for two position there of bucket

  0
  115
  0
  200
  0
  285
  0
  370
  370
  0
  450
  0
  530
  0
  610
  0

  Regarding graphic design, here is the code (not exactly like yours but you can make adjustments - discover the documentation Flash Graphics class):

  var sp:Sprite = new Sprite();
  var gr:Graphics = sp.graphics;
  gr.beginFill(0xff0000);
  gr.moveTo(0, 0);
  gr.lineTo(213, 5);
  gr.lineTo(213, 65);
  gr.lineTo(6, 75);
  gr.lineTo(0, 0);
  gr.endFill();
  addChild(sp);
  

  In regards to the positioning, what are these classes/symbols backet and baketr?

• I need help I get error 6 installation program and creative cloud 1 error.

  I need help I get error 6 installation program and creative cloud 1 error.

  Code 1 https://forums.adobe.com/thread/1434528

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• How to create a gallery page that you can click on an image, expand it and move left or right to see more images?

  How to create a gallery page that you can click on an image, expand it and move left or right to see more images?

  @

  You can use the slideshow widget to do this. For more details: Adobe Muse Help | Working with slide show widgets

• Scale and move a finshed animation

  How can I scale and move a finished animation (with several object - should I consolidate them or something since I didn't wan't to touch the bottom?) without having to do it on each keyframe? I'm completely new flash a detailed response would be appreciated.

  You must take the time to familiarize themselves with the tool you are trying to use the option - the forums are no place for lessons, mainly aid just for the problems that you can demonstrate.

  To create an empty movieclip, in the main toolbar (the Explorer for awhile) choose Insert-> new symbol-> (new sign symbol) MovieClip-> OK

• Get an image to scale when the window is resized

  Hello

  I noticed sometimes when I discover a window pop up and I resize this window the image grows as well. This happens sometimes in pop up windows (or any window I think) and sometimes it doesn't.

  If I have a behavior attached to a thumbnail image in my web page that launches a pop - up with an enlarged this image version, how can I get the picture to resize more or less when someone resizes the window?

  Thank you!

  Babs

  Hello

  Do not include the attributes width or height of the image size. Instead use css to set the width and height in percent values.

  Important - because you don't know how your user will resize their browser, the image is not resized to scale unless you use side (e.g. php) server to resize the image, see - l http://www.bitrepository.com/resize-an-image-keeping-its-aspect-ratio-using-php-and-gd.htm.

  It is possible to do this with javascript, but this requires a knowledge of the reports l / h to the code.

  PZ

• I need help to get Dreamweaver to recognize html and php files and htm files.

  I have a site legicy and it is prohibitive to chane the names of .php file. So I try to get Dreamweaver cs5.5 to interpret the htm and html files that are including php.

  I'm under XAMPP as my test server.

  I have the index.htm file and it displays all of the links as broken and will not work in live mode view with php includes. However if I rename .php file the file analysis correctly in dreamweaver.

  Is there a work around that?

  I was able to get the host to work Web site by editing the .htaccess file to use this code, but it does not work in Dreamweaver.

  AddHandler x-httpd-php5-cgi .php5

  AddHandler x-httpd-php-cgi .php4

  Options + ExecCGI

  AddType application/x-httpd-php .php .htm .html

  AddDefaultCharset UTF-8

  AddType text/html .htm .html .php

  AddOutputFilter INCLUDES .html .php .htm

  I think you need to change your recording PHP file in XAMPP.

  Nancy O.

• ENVY of HP dv6-7204AX: need help to get the BIOS image file (ROM or BIN) for HP ENVY dv6-7204AX

  Hello everyone, I really need someone who could help me get an image file (ROM or BIN) bios for my laptop HP dv6-7204AX ENVY.

  For some reason, after that cleaning my fan cpu and everything put back toghether I had accidentally damaged the bios, because the electric sock, that's what the tech guy said :-(

  My computer is now automatically power on whenever I plug the adapter and nothing start (only caps lock led flashing continuously1time and black screen)

  Thank you

  Hello kieuminhuy... I'm sorry that you are having this problem with your ENVY dv6!

  kieuminhuy, you can go to the page of downlopad 7200 WANT dv6 to download and run the SoftPAQ BIOS proper.  You do not have to run this SoftPAQ on the failed system - it should work on any system!  When you run the SoftPAQ, chose the option to copy the image file of the BIOS to another location (see below).

  I hope this helps!

  WARNING: I am an employee of HP, but I am not a spokesman for HP.

  • If you found this information useful, please take a moment to click on "accept as a Solution.
  • If you do not want to say thank you, please click the 'thumbs up' to give me congratulations!

  

• Why do I get blank images with keywords on a Lightroom 3 catalog restore?

  I had to do a fresh install of Lightroom 3 due to an attack of malware on Windows 7.  When I try to restore the catalog, I get blank images with keywords and flags.  How should I do?

  I have all the data, including images and backups on another drive of catalog.  It is not affected by the malware.  I followed the standard procedure to restore the catalog.  I removed the empty catalog and pasted in a backup.  I just solved the problem by opening Lightroom as administrator.  The images appeared, and they continue to happen now with a normally open Lightroom.

• Help on Perspective correction, Image stitching and then pattern matching.

  Hi all

  As a newbie in LabVIEW, I don't know a lot about machine vision.

  I need for my project automation, stitching the images (from 4 cameras, 90 degrees). Do the perspective correction and then form a label (which is actually pasted on the jar).

  Please share your experience on the same type of project. And help me to proceed with the development of the project.

  Also find enclosed all the pictures from the camera.

  PS: Due to budgetary constraints, I use very basic USB cameras available, and the attached picture is the actual image.

  To be able to correct the image for distortion, you first have to calibrate it. Assuming that your setting of the camera is constant (i.e. the bottle always at the same place in what concerns the cameras, I would first of all paste a grid around the bottle calibration and then take a few pictures of this grid with all four cameras.)

  We install a calibration grid, you can print: C:\Program Files (x 86) \National Instruments\Vision\Documentation\CalibrationGrid.pdf

  This example will then show how you can learn the calibration using the images of the grid, and then the correct images would have taken you without the grid.

  \LabVIEW 2010\examples\Vision\2. Calibration Example.llb\Nonlinear Calibration Example.vi Functions\Calibration\Nonlinear

  Note that you need to recalibrate the system if something changes (lens focus, camera or bottle of position.

  After this step, you should have 4 images 'straight' which have been corrected for distortion and which can be used for sewing.

  For sewing, unfortunately, Vision Development Module does not include an exit of the seams of box function.

  If this is acceptable, you can use some third party software that provide features couture, such as Photoshop Autostitch, Hugin, Ptgui, Panorama Tools, search for Microsoft Image Composite Editor, CleVR Stitcher or Adobe Systems.

  If you need to do everything in LabVIEW, I can point you to some of the tools provided with the library you can use to create your own algorithm of seam. This part is certainly the most difficult of your project.

  Image stitching process can be divided into three major components - image calibration, registration and fusion. We already talked about calibration.

  -Image recording is to couple features in your images in order to align them. You can use tools like the corresponding model and edge detection for this purpose Watch examples of vision LabVIEW to know how to code in LabVIEW.

  -Image mix is to process the images to account for the difference in brightness of images from several cameras.

  Histogram analysis on the different images and applying a lookup table are simple tools that you can use for this purpose.

  Images can then mingle with features like IMAQ ImageToImage.

  This thread also talks about sewing:

  http://forums.NI.com/T5/machine-vision/image-stitching/m-p/860414

  Hope this help get you started. Good luck with your project.

  -Christophe

• After downloading CS5 and clicking on install, I get the message that the disk image is damaged and I should egect the Image

  I downloaded CS5 on the site was given to me by Adobe. When I click the button install, a message pops up "The Disk Image is damaged and cannot be installed, eject the disc" what should I do?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Beginner help.  Changing an image of the stock in a pure black and white image without grayscale.

  I'm taking a black and white (gray scale) tigerpaw and convert it to a totally black and white image without grey scale.  I imported the image (free, unprotected) and size it.  I used the magic wand to select all areas not black and I want to just convert to white, but I can't seem to understand this.  I'm sure this is a stupid question, but the solution is to escape despite the search. Thanks for any help.

  Now that you have selected all of the areas you want to edit white > fill and, in the field of use, choose white. The mixture of Normal mode.

  If you wish, you can select > Inverse the selection and edition > fill with black

  Then select > deselect

• Image resizing, I tried to use the scale and positioning, but it won't save!

  I'm working on a project and most of the images do not match the size of the screen so I used the video efects > scale and Position to do things.  It changes, then I visited and then go back to it and he's back to where he started.  I can't understand this?

  Even by double clicking on the image and move it with the mouse do not work.  It leaves a black line next to the image where it does not.  How to cover, I'm doing it wrong?  This is how I did in the past.  I tried l ' down and restart.  Nothing works!

  Let me know if you figure out how to fix it you and how you did it.

  Thank you! s

  I thought about it!  I went through everything and I mean everything and it was the box that says unifirm scale under video effects.  I want that my last 3 hours back Adobe!  Thanks for the help though!

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Used Firefox help too get answer how to uninstall "Babylon" and the "tab" continues opening each time, Firefox is started

  Every time I open Firefox I get 2 tabs opening - homepage and help of Firefox with the parameter "I want remove Babylon Search... ». I needed this information, 1 week ago, to remove the "Babylon" search engine that came after trying to install a .pdf conversion program. The search engine is not running, but keeps opening the page of Firefox help with the issue.

  You may accidentally added that page as a second search results homepage - Firefox allows multiple pages as home page.

  You can check here:

  Orange Firefox button or classic menu Tools > Options > general

  As mentioned in the article How to set the home page, the second URL would follow the first one after a "pipe" (or vertical bar) character (|). You can find something there?