Help to repair the installation of DW8

Similar Questions

• XP Reinstall or repair the installation, all the keys show as zero and will not turn on!

  I do installs repair and re - installs several PCs in the last days, and none of the license keys are coming as valid, though even I am sure they are (the PC came directly from Dell).

  Now, I have one, I did a repair install, though I have the correct cd (oem, oem cd installation), the key showed as not valid for repair so I used the public keys of http://technet.microsoft.com/en-us/library/bb457096.aspx to complete the installation.

  Now, however, I can not connect to Windows. It won't let me open a session as long as I go through the product activation and activation says that my (valid) key is not valid! I would use the key update tool, but cannot connect to use it!

  It said that the key which is on my COA which has been on the Dell PC is not valid? It's a bit infuriating. The first couple I gave up and used nine keys of unopened copied of XP that I have, but I'm out of those now and in any case the old keys must be still valid! Unless MS is turn off old keys to sell more. Seems pretty shady to me.

  More information is needed, such as:

  1. is the Dell keys to products for Windows XP Home Edition or Windows XP Professional?

  2 is the OEM Windows XP CD, you are using a Windows XP Home Edition or a version of Windows Professional?

  3. what level of Service Pack is installed on the CD that you are using? 1, 2 or 3?

  4. have you tried to use the Windows product key update tool ?

  5. have you ever tried to activate by phone: How to activate Windows XP by phone

  Carey Frisch

• Help Information about the installation of the apex

  Oracle linux 6.6

  Oracle 11 g r2 database version

  11.2.0

  Version 4.2.4 apex

  Server GlassFish 3.0.1

  apex listener 2.0.5

  link: -.

  to install the glassfish Server

  https://docs.Oracle.com/CD/E21611_01/doc.11/e21058/install.htm#AELIG7040

  My query is: -.

  the sequence of steps is right: -.

  Installation of Apex

  Listener of the Apex facility

  Galssfish and deployment server installation

  Hi ReemaPuri,

  ReemaPuri wrote:

  And for the installation of configuring the listener Apex

  Apex would be installed in stand-alone mode, only?

  Stand-alone Mode isn't an option to configure in ADR.

  But for standalone Mode for ADR Oracle recommends:

  Stand-alone mode is suitable only for development purposes and it is is not supported for use in production deployments. Use a taken J2EE application server supported for production deployments.

  Reference: running in stand-alone Mode (read the introductory paragraph)

  With ADR, you have four options to be configured with Oracle APEX following:

  • Stand-alone mode
  • Deployment to Oracle WebLogic Server
  • Deployment to Oracle Glassfish Server
  • Deployment of Apache Tomcat

  Best option is to configure the ADR and deploy in support of Java EE application servers.

  I hope this helps!

  Kind regards

  Kiran

• Repair the installation in Windows XP safe mode: Posible?

  Nice day

  I'm working on my computer that has Windows XP Professional, after having removed the old version of Norton 360 and reinstalled the One updated. My computer keeps restarting every 2 seconds in Normal mode. I can boot into safe mode and safemdoe with networking. I checked the event log and it gives me this: error code 0000001 a, parameter1 00041785, parameter 2 c0e00000, 81c544c0 parameter3, parameter4 00000000. Is there a resolution to this? or can I make an instaollation of repair windows XP in safe mode?

  Thank you

  If you are unable to do things, I asked, I think your best course of action is to make sure that all your data is backed up safely (there are methods to get there, even if you cannot start in Normal mode), and then perform a clean installation correct.

• Need help. After the installation does not start Lightroom 6

  I am a subscriber of plan of photography and just upgraded my copy of LR of 5.7.1 to 6.0 through the creative Application of cloud. Unfortunately, when I click on the shortcut of Lightroom on the windows desktop or when I try to launch Lightroom 6.0 in the menu file directly, nothing happens, which is Lightroom does not start and does not present as an application running in the Manager of tasks). I tried uninistalling and reinstall Lightroom 6.0 and the computer restarts, but none of these has solved the problem. 6 of Lightroom won't start or run. Does anyone else have this problem or is anyone know what I can do to get Lightroom 6.0 to run?

  HA, I found help in this thread: LR CC 2015 hangs after installation on Yosemite 10.10.3

  I just need to log out of my account in the creative cloud application, sign and everything started working again!

• Need help - problem with the installation of the Office

  I really hope that someone can help as I have spent HOURS trying to solve this thing with Palm Desktop (DP). My family lives and breathes out of this Palm.

  First of all, I have a Palm Treo phone for half of the year, but a user palm for 4-5 years. I used Datebk6 with absolutely no problem. About three months ago my phone got wet and shorted dirty keyboard. I ordered a new keyboard, installed, and everything was fine. Not sure if this is related, but mentioning the bears.

  Then a few weeks, something has happened. I'm not sure if I've updated something or another user of the computer in the House has done something. Palm desktop, account opening, two icons on the left side of "Palm Desktop" - media and install. No calendar, notes, tasks, all functions that I use. I couldn't print calendars more.

  So first, I uninstalled the Democratic Party amd reinstalled the period off the drive. The Democratic Party looked decent with a calendar, etc., but this version had the "quick installation". When I installed the version on the net which solves the problem of Vista 6.2.2 he placed all my third party apps in an incompatible "apps" folder and the Democratic Party shows install yet once just the icons and media. Once again, no calendar, tasks, memos. However, the phone and its applications still worked OK, everything was there - then...

  I thought that maybe the problem is hotsync during initial installation, so I reset the phone to the original factory settings (erased). Distributed with uninstall and reinstall and it happened again. DARM duration with just the media and install it. No option to open an archive. Previous versions the Democrats have the calendar etc, but of course now without any data. Version 6.2.2 has no calendar, tasks, todo etc.

  I need help. someone at - it suggestions? Where can I go? I need this problem.

  maramac - check if the UAC has been reactivated (User Account Control).  I read in other posts that these latest Windows updates have reactivated UAC on PC of some people of.

  This could also cause the problem you are experiencing.

  Control user/accounts/Turn User Account Control OFF.

  WyreNut

• Someone please help me with the installation of an updated on my Blackberry browser

  When I access windows live on my windows (9330) BlackBerry curve says I need an upgraded browser to use windows live. Internet Explorer is not available for Blackberry. What am I supposed to do at this point? Please help me and if possible send me your opinions and or solution. * E-mail address is removed from the privacy *

  Hi TimHayner,

  I suggest you to contact Blackberry support for more help and information.

  http://us.BlackBerry.com/support/

• Need help to repair the lens!

  Hi I am Andy and I just want you ask around about the repair of the lens.

  Recently, my uncle gave me his 17-40mm f4L lens and told me that there is an infection minor fungus in one or some of the elements on the inside. When I checked, there are actually 2 mushroom vein small infection and recently, I just noticed a grain of fungus at the rear of the head element as well.

  With that, my question is how much would it take to repair or clean the lens to get rid of the fungus for preventing further attacks?

  It is not yet possible, but Canon will give you and estimate everything first.  It will probably take completely apart. Fungus is bad news.

• Need help to repair the internet connection; Airport extreme and microsoft xp pro

  I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

  Hi Julie,.

  1. do you receive an error message or error code?

  2 have you made changes on the computer before this problem?

  WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

  This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

  Method 1:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Refer to the steps in the following Microsoft article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Keep us updated on the status of the issue.

• need help to repair the (WD5000H1U-00) western digital external hard drive problem. ___

  its supposed to be plug n play and uses standard drivers of the operating system. I plugged the drive and the computer installed the software/drive, but when I clicked on my computer the drive is not in the list.

  I was on the site of WD, and they do not have a driver that I can download. I spent 3 days all over the net, MS and WD site, and I am now at my wits end. I tried MS auto fix and fix it myself and still no joy. I clicked on 'remove hardware safely' and have tried updated driver, deleting and reinstalling and I gave up now.
  I need the drivers for it... Help, please!

  Yogi Hello 1968

  are you sure that the usb port does not work properly? You can try a different usb port

  have you updated the firmware http://support.wdc.com/product/download.asp?wdc_lang=en

  read the third detachment of jwscuba http://forums.computershopper.com/showthread.php?t=11&page=2

  Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Help us again the installer crashig

  Please help me keep blue screening and cutting out randomly.
  Empty the file - https://db.tt/zY2EkgL8

  

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.
  

  If you are overclocking anything reset by default before running these tests.
  In other words STOP!

  If you don't know what it means that you're probably not

  
  

  
  

  
  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

• Need help to repair the Satellite A500

  Hey guys,.

  I tried to update my BIOS on my A500 when he requested to and 2 moniutes in the update my laptop froze. So I turned it off by pressing the power button and when I try to turn back on it, don't give me a black screen and I do not drive HARD turns / ROAR. I read somewhere that I need to recover using something like crisis or other...

  Can anyone offer advice on what do I do?

  Thank you

  JR

  Unfortunately the BIOS is screwed in place now. It s very bad situation now. To be honest it will be problematic now to do something and in such situations, you should contact the nearest Toshiba service provider.

  From time to time people report on these issues and here is a very interesting link on how to fix it - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  Check it out.

• Can someone help me with the installation of Acrobat 9 pro on a new mac with os x Yosemite?

  It does not work! I installed CS5 on my mac and everything works, except acrobat.

  I really appreciate your help and suggestions :-)

  MArieke

  Hi marieke4gever,

  I'm sorry, but Acrobat 9 is not compatible with MAC Yosemite, that's why you could deal with this problem.

  See this link: ucts.html https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod

  Kind regards

  Ana Maria

• Error 1935. error during the installation of Assembly--how to fix?

  Hello

  Recently, I lost my laptop (a Lenovo X201t Win Ultimate running any Bluetooth capabilities (64-bit).) The problem started when Windows Update offered me an option "Bluetooth with Enhanced Data rate software II v6.2.1.3100 (7ZBV19WW)" upgrade. This update of first removed the existing Bluetooth SW and then started to install the new version. Towards the end of the installation (i.e. when the progress bar has reached almost 100%) all of a sudden the next popup appeared:

  -----------------------------------------------
  Error 1935.An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.ATL, type = 'win32-policy', version = '8.0.50727.42", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture ="amd64"'.

  See Help and Support for more information. HRESULT: 0X800736FD. assembly interface: returned IAssemblyCacheItem, function: commit, component: {51B6FD4C-6551-1104-A01F-C8B3B9A1E18E}
  -----------------------------------------------

  I googled around fragments of the above error message, but appearently it signals a significant problem. Some discussions I've found comes to the conclusion, that some registry entries do not have the correct permissions, in most of the other discussion gave, had something that was wrong with the subsystem that some libraries .NET and .NET (most listed some "MS Visual C++ 200 x Redistributable" as guilty) were opposed or had been corupted or put in an inconsistent state.

  I tried various tips in these discussions, but nothing has worked so far, so I ask here:

  • What really does this error mean?
  • Can we deduct sort of info in the above message, what to do or where to look for?
  • How can I locate or identify the library or component (or other) that is the cause, so that I can try it in- or reinstall first we hope to solve this problem?

  I really need my bluetooth capability! I use it regularly to synchronize with my cell phone and listen to music and I can't wait these two functions no longer work!

  Michael

  PS. : in case this requires some "open heart surgery" on the system: I'm comfortable with all kinds of windows of Mgmt. Tools, edit the registry, etc etc - so no problem! I also took a recent disk image (alas, taken only after the error appeared), so still some changes difficult to solve this problem would be fine with me...

  Hello

  If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted. The transaction log is used by the Windows file system to recover when a file error occurs. It can also occur if an error occurs with the installation of .net Framework.

  Step 1: To correct this install error, you must clear the log.

  a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "run as administrator" and click "allow" for the elevation prompt

  b. in the command prompt, type the following command:

  true fsutil resource setautoreset C:\

  c. which assumes that C: is the drive where Windows 7 is installed. If it is installed on another drive as D: Please change the appropriate drive letter.

  d. restart the system.

  e. install the software and check.

  Step 2: Start the Trustedinstaller Service. It is possible that the Trustedinstaller service do not appear in the service list. If you must change the registry value to 'active' in the system registry.

  To do this, you must:

  a. type "regedit" without the quotation marks in the start search box.

  b. in the Registry Editor window, navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > control.

  c. in the "Registry Editor" dialog box, double-click on 'RegistrySizeLimit'. This opens the "Edit DWORD value"dialog box.

  d. in dialog box "Edit DWORD value", enter ffffffff as the 'hexadecimal " value." Click on the "Decimal" radio button and enter 4294967295 value 'Decimal' . Click OK.

  e. restart the computer.

  f. log as long as administrator, open an command prompt and type SFC/scannow.

  Once the process is complete, reinstall the program that challenges you to install.

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Step 3: Repair of .net framework and check.

  Repair the installation of Microsoft .NET Framework

  To do this, follow these steps:

  a. Click Start, click Control Panel and then click on Add / Remove programs.

  b. in the list currently installed programs, click Microsoft .NET Framework and then click Change/Remove.

  c. click on repair, and then click Next.

• Guide for the installation of an HP ENVY 700-230qe CTO Desktop TV tuner card

  Hello

  I am trying to install a TV tuner (Hauppauge WinTV-HVR-2250 1213) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the guide installation and procedure for the TV tuner card? Thank you.

  Here's a guide to help you with the installation of an expansion card or of the video card in the computer.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.