Help to the implementation of individual thumbnails with captions

Similar Questions

• Help to the implementation of Windows Mail to a PC user with a visual impairment (he is new to computers)

  (1) how a person with a visual impairment can MOVE down to the message box (to read a new e-mail) using the keyboard?
  (1-B) Better yet, how can I make it easier (with keyboard if possible) for him READ his e-mails and then go back to the e-mails received recently, the hightlight & playback.

  (2) maintain policies to 18 points. When he WRITES a new message. It can change to 18, but he is always default to 10 after the
  new message & must be changed again.

  (3) RESPONSE to an email to keyboard... How?

  I have downloaded/printed some instructions simple keyboard that does NOT work, so if you can tell me where I could find more updated information. It would be a great help.
  Thank you!
  RHQM

  Hi RedHatQueenMom,

  Try the option missing for the different font size.

  You can consult the following link which provides step by step instructions to adjust accessibility settings and programs in Windows Vista and check if that helps.

  http://www.Microsoft.com/enable/training/windowsvista/default.aspx

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Elements necessary to the implementation of SRM5.0 with a VNX5300 with ESXi5.0

  Hello

  I know from reading the documentation I need right SRA, I. The issues I see is that I don't know what particular NavCLI, I need to download... Do I need to download and install on ESXi hosts? or somewhere else?

  Where can I download, I was given a navcli for installation on the nodes of ESXi, but it is in RPM format, which can be installed on a node ESXi?

  Does anyone has installed SRM5.0 on a VNX5300?

  If so guidance would be appreciate.

  Thank you

  Hi David, I'm not sure if this guide was useful or not: http://www.vmware.com/pdf/srm_admin_5_0.pdf

  If there is additional information you want to see in it please let us know.

  A short version of my answer to you is that there are several steps that must happen before you configure an Array replication.

  FYI, these are too simplified and assume that you are familiar with everything said here - if something is not clear - let me know.

  Part 1: Configuration of the bays

  (a) set up your table with FC/iSCSI LUNS or NFS shares on the two tables for primary and secondary site.

  (b) present data warehouses to the hosts of the main site

  (c) enable replication mirrorview between primary and secondary site berries

  Part 2:

  (a) installing vCenter Server on both sides

  (b) install ESXi hosts on both sides

  (c) configure them for storage array only primary side

  Part 3: Install SRM

  In order to ensure that all internal mappings and dependencies are correctly supported it is recommended to install everything in the following order-

  (1) Navispere CLI (I think the latest version is 7.31.32or something like that)

  (2) solution Enabler (I think that later version is se7322-WINDOWS - x 64 .exe)

  (3) VMware SRM

  (4) EMC VNX SRA

  (5) EMC VNX Mirrorview Enabler for VNX SRA (this is FC/iSCSI only)

  (6) EMC VNX Replicator Enabler for VNX SRA (this one is for NFS only)

  Now install you all of these packages to the same location where you want to keep your SRM.

  In our laboratory, we kept vm 3: 1 for vCenter Server, 1 for DB and 1 for SRM (so all the packages would be installed on a virtual machine SRM) you don't have to do it this way, but it is an option at your disposal...

  NOTE: Package numbers have changed - please do not quote me on those...

  I hope this helps, good luck.

• Help to the implementation of a local repository for downlooading and install all updates from MS on all my windows on my local LAN computers

  Hello

  I am planning to move to our new home in the country next year where I won't have highspeed internet (15 MB / Sec) and the threshold of large data capacity (250 GB) (Comcast).

  Currently we will be able to get the wild blue Satellite service (1.5 MB / Sec) with a 7-12 GB monthly Cap

  I am currnelty use 75 GB per month to update the 5 computers and stream netflix movies and download all my podcasts.

  May - some please point me in the direction where Microsoft provides the service / ability to download and manage these patches via a MS unique source and then I could build rivierra deposit on my LAN?

  I know that it is available for business facilities it would be nice to be able to install this feature for the professional user home / small.

  Kind regards

  Dennis

  Security updates are available on ISO-9660 DVD5 from the Microsoft Download Center image files
  http://support.Microsoft.com/kb/913086

  More options on the page of my colleague TaurArian: http://taurarian.mvps.org/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help to the implementation of the ipad to print wireless

  I'm trying to set up my printer hp deskjet 3050 to print wireless from my ipad/iphone...help!

  The reason that the issue is important, the Deskjet 3050 does not support Apple Airprint.  The 3050 a supports Airprint.

  This document lists the supported Airprint printers.

  http://support.HP.com/us-en/document/c02814760

• Need help with the help of the credentials that are named with a custom plugin

  Hello

  I'm developing a plugin that has a collection script which makes calls to api for our equipment and must pass a user name and password in the call. Looks like a job for a named credential but I'm just a little unclear on how to do it with all available options.

  From what I read, it looks like I want to define a Type of credentials and a game - as in the example in chapter 14 of guide plugin - and add it to my XML. I presume that this named credential then will be set up in EM in respect of security, the section of credentials named when I deploy the plugin. My installation instructions would then direct the user to fill out the correct values and then the plugin use the ones in the script in the collection.

  Is this fair?

  What don't get me, is how I refer to values of named identification, in the plugin. Right now, I use the OSLineToken Fetchlet to call my collection script. I'm not clear on how to pass the user name to values of password for the credential named to the script.

  Thanks for any idea,

  Tom

  Mainly in the "CredentialSetColumn" use the SET_COLUMN attribute to set the credentials handle and you can refer directly to it in your application.

  For example, if you set the following credentials set of credential handles "Exemple_utilisateur" or "samplePassword" or "sampleRole", you can directly use the "Exemple_utilisateur", "samplePassword" and the "sampleRole" of the CredentialSet above in your query

  Monitoring of the credentials of the sample

  Monitoring of user IDs

  Password oversight

  Oversight role

• Recommendation for the implementation of a customer with BC and Muse

  Hello

  If I have a new client I want to create a website, how to proceed with BC?

  I should create a new account of BC for the customer or if they have an account with my portal?

  They should have their own domain name.

  I create the site Web of Muse, I know that I need to connect my Adobe ID somehow to their account of BC if this would be the way to go.

  What do you recommend?

  BR Graphicalmarc

  Hello

  You can publish the site to your account partner, and then allow your customers to access admin.

  If you want to publish the site on your partner to customers account, you would need to change connection BC end of Muse, Edit > Preferences > Publish > switch accounts.

  So it depends on you how you want to proceed with options.

  Let me know if you have any additional questions.

  Thank you

  Sanjit

• Help to the implementation of a book

  I am creating an ebook, not really pulling in different chapters, I have the whole book in a Word document.  Is there a way to copy all the text in the Word doc and somehow stick in InDesign and have it automatically flow-through, create the pages needed?  Or what I have to go to page one, create a text box, paste the text, enter the text to overflow, go to page 2, paste, etc. etc.  Since it's 80 pages, which could become tedious.  There must be a better way, no matter who know one?

  Thank you!

  Here are the basics to put your word file in ID. Before you begin, make sure that there is no change not allowed in the file (track changes) and make one save slot to reduce weird stuff.

  Configure your file ID with the page size and the margins you want. For multipage documents, I usually choose facing pages, but I don't know enough about ebooks to know whether it would be appropriate or DorganBot of difference at all.

  On the file menu choose Place... and navigate to your Word file. Select the show Import Options checkbox, and then click OK. You prederve the styling or map Word styles to styles of the ID (or edit them later). When you return to the empty page, you'll have a busy cursor or 'Gun place.' Hold down the SHIFT key and click where you want the text first. InDesign adds pages and images within the margin guides to what the text was sunk on a page.

• Help in the publication of a project with slides of demonstration and evaluation

  I created a project that includes an assessment and demonstration. It was published on a LMS system, however, when they say in the LMS is only the slides in the demo to record as seen and thus incomplete reports.

  Can you advise what settings I need or if this is possible. If she had work in Captivate 6 but not on 8 Captivate

  So no connection?  The learner is working their way through all the slides in the beginning to the end?

  Have you tried to turn on the marker of the State in the table of contents and reset the table of contents to view all slides in the project?  This marker should you show whether all slides that get visited are marked as completed or not.

• Help recover the data of Zire 21 with dead touchscreen and no connectivity or requests

  My old Zire 21 was suddenly no longer meets the stylus on the touch screen, so I can raise no longer any application to do a HotSync to save my data (and my old hotsynched data has been saved on another computer and doesn't have a lot of added information about the Zire).  I can still put the on and turned off and I can get to the calendar and address book using the buttons, but I can't be sure that the machine is always in charge when connected by a USB cable and I can't get the Zire to use HotSync to perform a HotSync operation.  Also, when I try to connect the Zire via the USB cable, it is not recognized as connected (it does not appear in the list of connected devices).  I tried the two running a business card inside the screen to dislodge dirt and do a soft restart, both without effect.  Anyone have an idea how I can get my data out the Zire21 and on the Palm desktop, I downloaded on my current computer, so that I won't lose data (especially if the Zire is discharged soon)?  And if I do, do anyone know how I can then download the information to my new Gmail account?  Thanks in advance.

  As if by magic, it just started working again.  Prayer seems to be an effective remedy for this problem...  And backup solves the problem, if it happens again.

• I need help in the design of a page with notes

  I would like to place a translation of the word one or two in a narrow column alongside a main text. There are a lot of translations in this text, about one every two lines. The function of reference simply creates a long list at the bottom of the page. This creates design challenges. Does anyone have any suggestions of what I can do to design a page where these translations of one or two words appear in one column next to the text, or somewhere other than a list of unique column at the bottom of the page. Thank you!

  If you are using CS4, you can try free "Dynamic Sidenotes" the script of Peter Kahrel, available here:

  http://www.kahrel.plus.com/indesignscripts.html

• Is it possible to delete a plot with the help of the mouse select the chart control?

  For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.

  How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?

  If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
  Is it all a user-friendly way to remove a track selection on the chart control?

  I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.

  A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.

• The site drifting to the left when you browse with anchors

  Hello.

  I have set up my site to muse on a single vertical scrolling page with a top-nav than links to anchors throughout the body further to the bottom of the page. However, when I saw in Muse or preview in the browser and click on a link in the horizontal nav top site skid to the left as it scrolls to the bottom of the page automatically the anchor.

  It seems do not depend on where the anchors are aligned horizontally on the page but I can't get a consistent behavior to help out the.

  I started with anchors all lined up on the left guide. which produces the initial problem.

  Then, I tried with them along the edge of the document pane at the outer edge of the margin and got a little less drift.

  I tried aligning with left alignment tool and that put them right on the edge of the page where it meets the margin, but I always drift.

  It seems that if I align one or 2 anchors more left the others I have it does not derive between them, but only to those who are more to the right. If they are all aligned on the same place but then she drifts left each time.

  Any help would be greatly appreciated. I've been playing with this thing for far too long.

  Hey, I had same issue and put a verticle guide in about 100 pixels to the left. Then I arranged all the anchors is perfectly centered on this guide, that I scrolled to the bottom of the page. I'm used to a layer called "anchor" and each of them keeping there and nothing else. It clears up completely moving in all browsers. Hope this helps your project as well. I don't know why it worked, but it did.

• Windows Photo Viewer shows the files blank JPEG thumbnails (inside folders) poster white icon, already tried a lot of Solutions - please help! S.O.S.

  Dear all,

  I have this problem:

  

  All JPEG files are normal, I tried to open with the help of Adobe Photoshop CS5. But if I use it to watch my files, it takes too long to load.

  This is the case if I try to open them using the Windows Photo Viewer:

  

  It's when I try to open it with Adobe Photoshop CS5:

  

  So the file is fine, they are non-empty JPEG.

  The difficulties I've tried before posting on the forum:

  - Fix it with Microsoft to photo viewer

  Fix It for animals works well and could not find any problem though, so nothing is fixed.

  - Removal 'External event AMD' Service

  Nothing change

  - Removal of color for the monitor profiles

  Nothing to change also

  - Updated all the drivers and windows

  Nothing change

  - Boot in Safe Mode

  The thumbnails are displayed correctly and "Windows Photo Viewer" display my images perfectly well BUT...

  - Start in Normal Mode with all the Services of persons with disabilities (except Microsoft)

  The problem happens again, that the thumbnails are blank and the images also.

  - Cleaning disc (with checked "thumbnails")

  The problem still exists

  

  - Set programs "Default" for the Windows Photo Viewer

  The problem still exists

  - Run SFC/scannow From The Command Line

  The problem still exists, and the SFC somehow told me that my Windows is fine

  

  - Removal of hidden miniature manual

  The problem still exists

  - Windows Live Essentials installation and use the 'Photo Gallery'

  Photo Gallery crashes all the time after asking if I want to associate files "JXR" or not, but I'm not on this topic, but this does not solve the problem.

  I tried every step, I have found on various types of forum, but not the last magic: Reinstall Windows, I really want to solve this problem without cleaning Windows installation if possible, and I'm so in love with "Windows Photo Viewer" because it's simple, fast, and it is very precious to me. I tried free viewer and FastStone Image Viewer but is a bit complicated, controls are small and it always comes out in full screen, I need this so baaad.

  My computer is:

  A10-7800 Kaveri AMD processor

  RAM 8GB Corsair Vengeance DDR3 black

  Western Digital 1 TB Caviar Black hard drive

  Motherboard ASRock FM2A88X +.

  Power supply Corsair VS550

  OS: Windows 7 64-bit

  Thanks in advance :) I really want this wrong, please...

  Dear Ramesh,

  I thank very you much for your time to help me, after tumbling around with other solutions, windows finished in "the RPC server is blahblah" thing a bit, then I reinstalled everything from the ground up and the problem disappeared... I don't know what happened to the previous window, I am now using the same drivers, same software, except perhaps the earlier had too many junks (I think this is the classic problem with windows, after sometimes he collected too and begins to act dumb)

  It seems that the problem came, neither windows nor the drivers... But too bad it should remain as an "Unsolved Mystery": P

  Anyway thanks, see again you and Merry Christmas and happy new year to you

• Audition CC 2016 Record 2 microphones with the help of the audio interface

  I have two Audio Technica microphones running via an Audiobox USB interface, in my Macbook Pro (OS X El Capitan). Whenever I hit the record, I can never get mic 1 to work. How can I solve this problem and get the two microphones to record? I'm pretty new to this software and I found dated solutions which are not yet proven to be useful.

  Thank you.

  Well, it should be relatively simple.

  First, go to the menu Edition/Preferences/Audio Hardware.  Make sure that the Audiobox and its pilots are set for record and playback devices.  M-Audio interfaces so the exact wording will be a little different, but it should be fairly easy to identify the right device and I use a Windows machine.   Notice that under Windows my perhaps to go back to the Windows audio control and configure the Presonus as default device, so there is a chance that you might have to go to Core Audio and similar - this is normally not the case.

  Then, you're probably better of recording in multitrack display for each microphone can have its own channel.  Go to File/New/multitrack Session and fill in the details, you are prompted to specify a name, sample and depth etc. of bit rate.

  Then the bit important: on the multitrack display, there is a box at the left end of each track with things like level and Pan control and... important to you... the input switch.  It is a box and more a straight arrow.  Click on this and a drop-down menu, you can select Mono, stereo, or a few other options.   Select Mono and this, in turn, will give you a drop-down list with the available inputs.  Still, the exact wording will vary with interface you but you should find something like "Presonus Mic 1" or similar.   What to choose.

  Repeat the operation on track 2, but this time choose the second entry.

  Arming the two recording channels (the Red R in the same area at the left end of the track) and then when you hit the record on the transport controls, 1 Mic will be on track 1 and track 2 Mic 2.  Notes that, according to what you want to save, could have selected stereo and used two microphones that left and right in a piece... but I prefer to keep things separate and mixing down to stereo later - just a personal preference.

  Note that if you you save in this format much, you can save this configuration as a model of session to avoid having to define individual tracks every time.   Just set yourself up, then press file/export/Session model before recording anything.   You will then be offered your model on the new multitrack Session each time that you start a new project.

  I hope this helps.