Help! Turn on 10 power but nothing on the screen!
I got my switch 10 during about 6 weeks. First month was great. Then he started to get stuck in the mode 'sleep', but on mine, I realized I just need to hold the power button for 10 seconds to turn off or would be put on normally when I press the power button again. We were happy about that, he has worked steadily.
Thus, from yesterday: the battery was dead the day before. I left that it plugged in all night and day, then last night, I unplugged and tried to power it back it up. The backlight comes on - and sometimes it stays on, sometimes it goes off after about 10 seconds - but nothing happens. I left it on with the backlight all the night night LAST to drain the battery again. This morning, he was off, I plugged it in, same problem, no change.
I tried the button power + down / volume; Alt + F10; the reset button seems to do nothing; I have also seen a suggestion of F2 + F9 + F10 + entry that also did not work.
I can tell when the device is activated because the windows at the bottom of the screen button starts to vibrate when they are hit. Right now he's connected with the fixed Orange light in the power button.
I am afraid that the thing is just gone, but is there anything ELSE I can do? It was a refurb, so there is no guarantee. The seller has provided a 30 day warranty. Ha ha.
Thank you...
OK a tower more: with PC switched off, hold down the F2 key on the keyboard, then hold the power button until something happens.
After that, I'm out of conjecture.
Tags: Acer Tablets
Similar Questions
-
Equium L10-273: fan of CPU/HDD / lights come on but nothing on the screen
I have an Equium L10-273 and had to put in a new power outlet in the mobo.
I removed the wide and electronics. A friend of my put news on that to get back together.It sounds if the HARD disc / CPU fan / lights come on but nothing on the screen.
Have unplugged the cable from the screen and he recovered but not good.Any suggestions welcome
PS: A mobo out on a Toshiba Equium A60-155 will be mine?
To me, this looks like a motherboard problem.
In my view, replace the whole motherboard.
But it s only my personal suggestion, if you want to be 100% sure what's exactly wrong with you laptop, then go you and technician of the notebook check.PS: Don't think that a card mother Equium A60 - 155 to insert in the notebook Equium L10-273.
Greetings
-
My computer makes a noise but nothing on the screen, theres a light on the modem if
for the past few weeks that my computer will not start up - which is nothing on the screen, yesterday he started upward and today for a few minutes then froze now cannot get on... I got a blue screen problem as well... do you think that there is nothing I can do or not? I am running windows vista
Hey doz1990,I was not able to locate the specific page for this model computer. I suggest you email or by looking at the manual (if you do not find your they're online too, just use a search engine) and go to them via e-mail or a phone call.
Looks like it could be a serious hardware problem, but I can't say without more information. -
I have HP Pavilion ZV5325 with windows XP. When I start the computer with the battery power only everything seems to be okay. When I plug the charger (HP part #316688-001 power AC) start of the Welcome screen comes on, but when the desktop appears that the screen turns off after a few seconds. The computer is still following this timje, but with a white screen.
Hello
· Happens before? Since when are you facing this problem?
I suggest to reset the power of the system options and check whether the problem is resolved. Follow the steps mentioned below.
a. click on Start menu and click Run.
b. type cmd in the run box, and then press ENTER.
c. type the command which is given below.
powercfg /RestoreDefaultPolicies
I suggest you to update the BIOS and see if the problem is resolved.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite Pro P100-124 starts upward, but nothing on the screen
Hello world
I'm a newbie here & laptop but my companion got a satellite Pro P100 (Toshiba Satellite Pro P100-124 PSPA4E-001001EN) & it is my asked for help. Here's the problem:
Laptop starts to go through the procedure of starting with lights coming and cd player starts to work the rotation of fans, but nothing shows up on the screen
I said it could be the graphics card but could do with a starting point, I'm PC savvy but on the desktop, it's my first attempt at a portable computer so please be nice...
Hello
Have you tried this thing?
->, remove the battery and unplug the AC adapter from the portable computer
-> waiting for ~ 30 min 1 h
-> connect the two parts again and try to turn on the deviceIf this will not help, then it would mean that a hardware problem serious causes this problem and you will need to contact a Toshiba ASP technician to know exactly what s wrogn.
Good luck
-
don't not running disc can hear the rotating disc but nothing on the screen
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: we're not serious what the dvd is for place in the taskbar and you can hear fine but nothing shows up on the screen tried to use good media tried to type in the Run dialog box, but does not recognize.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
look great on pc, but nothing on the real web, online, any help?
look great on pc, but nothing on the real web, online, any help?
just set up a test Web page, integrating edge animate, works fine on pc, but happens online, my server directory, what Miss me here, and if anyone can help.
YES, AND THANKS FOR THE REPLY...
Ive designed a file small edge and put it into Dreamweaver, called great f12, and it looks like the PC. then, Ive tried to put all the files in the folders in my directory server and get the Web page not available, where the edge file is located on the page, don't know what im doing wrong, or what to do next... any advice. Cheers.
-
Hi all
Newbie here and desperate.
I have a problem with M17x my son this morning. Everything worked very well and after some time, turned off the machine it self. Now it does not start even - at least I think, it won't because there is nothing on the screen as it is empty.
I've tried several things, including trying to move on and outside, with or without a battery of the power cord.
I'm at a loss as to what could have happened.
Help, please.
Smakwam.
The gpu of cooking is very easy in fact, that you have designated your oven to about 275 degrees cover a cookie sheet with paper and configure the map out of it by winding 4 balls of aluminum foil and their definition on each corner of the map. you never want to have it put all directly on the sheet. do Cook for about 10 minutes then cool before coming back into the laptop. Always be sure to remove all of the components and the radiator and any residue of thermal paste. After sick cooking you need to reapply a fresh thermal paste. I use artic silver 5. It is has more detailed instructions on this online, as well as photos. You want to make sure it's your video card before you do it just to be sure. I just had to do it again last week, works like a charm for me every time.
-
Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on. Help?
You should contact the provider of the Add on in this case.
-
I just bought Adobe Acrobat 'download only version '. During the installation process, I wonder for my serial No. But nothing in the packing or the card has a serial number? How get/find my serial number?
Hi williamw18489690,
Please see this KB doc to find your serial number: find the serial number of your product Adobe quickly
Let us know if you need additional assistance.
Kind regards
Meenakshi
-
Re: Satellite Pro A200 - no activity - nothing on the screen
Hello!
I have a lot of problems with the Toshiba Satellite Pro A200.
Same problem for all: when you connect the power adapter led turns blue!
When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
No thing hard disk led...I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.Can U help me telling me that maybe the defective chip?
Thank you very muchHello
I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.
So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.
BTW: I am really interested about new comments here.
-
Nothing on the screen when Tecra A7 reboot
For about a week, my Tecra A7-201 shows a strange question.
When I reboot then there is nothing on the screen, but the machine continues to boot.
I can connect to the machine with MS Office remotely and in the Device Manager I see that there is no graphics cards and also without monitors listed.
I can stop the machine and then remotely and the same thing happens again to restart.
To get the screen back, I need to disconnect the power to the machine, remove the batteries, wait about 30 seconds, put battery back/ac on and now I have my screen back.
As I can't even Toshiba/BIOS boot screen to display everything that this happening before that windows never loads.
It happens too regardless the State of home (docked/undocked) or voltage (AC or battery only).I have no idea if the partners, but also the screen sometimes "flashing" - like lightning just a fraction of a second and returns to normal.
I'm running the latest BIOS 5.60.
Clues? The machine is still under warranty (and has been back to Toshiba for another problem already - so it could be a machine on Monday).
I asked Toshiba here in Switzerland and I get no response, just need to look at the machine (which means that it is gone for another week).Thanks for any help
Peter
Hello Peter
I don't really know what the problem is here (probably related equipment), but please do not contact Toshiba but partner service authorized in Switzerland. If you need address, you can find them under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
-
Satellite P200D died - nothing on the screen, no HARD drive noise
Hello
Toshiba P200D-112 (satellite)
Just 2 years and already 'OUT '.When I press the Start button, the power light comes on and will stay on.
The fans start but stop in a few seconds and nothing more happens.
Nothing on the screen, no hard noise complete silence.
If I continue to press the start for a few seconds power button is sharp as usual.Looks like a protection stop start to work.
I changed the CPU for nothing (the only chip that I can change without welding).
I tried with battery and without the battery.
I changed the HD.
I deleted the DVD player.
Now, I have on the table, just the motherboard and I have always the same thing.Do you please an idea on the reason of this phenomenon.
Thanks ChristosHello
I see you didn't check the RAM modules.
Usually, it is the first part that should be checked before you disassemble the laptop everything and try to replace the other, new parts like CPU or similarBut if the replacement of the RAM won't help, so I put t see any other solution proposal to replace the whole motherboard.
It's a shame because the new motherboard costs a small fortune
-
3 beeps pause 3 beeps pause nothing on the screen
3 beeps pause 3 beeps pause nothing on the screen
Hello
Sound beeps are error codes that describe a problem with your machine. A continuous beep
can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
System/BIOS manufacturer. The model 3 beep indicates similar type problems.Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
Creator, then see here:Computer MESSAGE / beep codes
http://www.computerhope.com/beep.htmIf my computer beeps and won't start, what do the beeps mean?
http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htmPOSTAL Codes beep
http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codesPower on Beep Codes post
http://www.pchell.com/hardware/beepcodes.shtmlIt may have other check so with system Maker or a real computer store (the one that makes its own internal
service and not of leeks and glances at a Best Buy or other stores).I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: nothing on the screen, just wallpaper
I can't turn on my computer, and when I click on my user name I have to enter a password after clicking on enter nothing appers only my background wallpaper but not the icons, the taskbar or anything, the only thing I ca see is the cursor when I move the mouse. What can I do to get my icons and my taskbar and everything back on my screen?
"blankdesktop" wrote in message news: e3df0065-10 c 4-47f1-8199-8a750f4c3b90...> I can turn on my computer, and when I click on my user name I have to> enter a password, once by clicking on enter nothing appers only my desktop background, but> no icons, the taskbar or anything like that, the only thing I ca see is the> cursor when I move the mouse. What can I do to get my icons and my taskbar> and everything back on my screen?Try to use the salvation of three fingers (C-A-D, Ctrl + Alt + Delete) to bring up the taskManager - then click on file > new task (run...)typeSOLUTION EXPLORER. EXEand see what happens - so try a system restore to a working system.HTH--NoelNoel Paton | Nil Carborundum Illegitemi | CrashFixPC
Maybe you are looking for
-
Satellite C660 PSC0LE - activate the option "Wake on WLan?
Hi all First time poster here. Have had my Toshiba C660 PSC0LE-00500JEN now for the best part of 18 months and are now looking to extend its capabilities. I don't really have a LAN at home, but have a WLAN, so I'm looking to implement "Wake on Wirele
-
How can I remove books from iCloud.
How can I remove books from iCloud. I sharing an apple with my children ID and they have all my books on their phones!
-
Iconia W3-810 cannot boot from the recovery disc
Hi, I have a 32 GB Iconia W3-810. The original recovery disk was lost. I made a Bootable DVD of 8.1 and also Win 8.1 bootable USB key. These two have been tested on another laptop, and both can start this laptop to the installation environment. I a
-
What happened to the automatic editing vector smart object function?
Photoshop has been recently updated,in Photoshop previous app when the layer double click on a dynamic object that were made with copy/paste from illustrator, illustrator open editing automatically, now I get this message:Windows 7 operating system.H
-
Where to find logs vCO in the vCO device, how to view live Windows machine?
I've seen several links that those refer to vCO installed on a windows machine, but for the device, which is the path? Another question, how do I watch live from machine windows Notepad as a log analyzer ++.