Help with a blue screen

Similar Questions

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Need help with problems blue screen with drivers for IOGEAR GUWAVKIT

  I try to install the Iogear Wireless USB to VGA on a Windows 7 laptop.

  I downloaded the latest version of the software driver from the Iogear website.

  The Manager application loads fine, but when Windows 7 tries to install the driver for the USB host card, I get an error on blue screen windows and restart the computer.

  The physical hardware for the GUWAVKIT works very well on a laptop 32 bit Vista.

  Has anyone met and solved this problem?

  Thanks in advance

  Ken

  According to their website, the win7 drivers are beta drivers, published in March 2010

  Have you tried Vista, relevant drivers for your version of bit of victory?

• My laptop stops with a blue screen

  Hello
  I'm french.

  My computer randomly with a blue screen stop.
  The error is BCCode: 3B

  It reboot.

  Hello

  Can you give us more details please?
  What laptop you have exactly? What operating system you are using? Have you already searched here in the forum to find answers?
  What is the exact code of BSOD?

  I think that without this information, we can t help you but generally it of still worth a try to reinstall Windows with Toshiba recovery disc. ;)

• Re: L635 - 10 p - stuck with the blue screen and system repair

  I'm stuck with black repair screen of windows startup with the able to move mouse cursor. The normal windows startup ends with a blue screen:
  "unmountable boot volume".

  Unfortunately, there is no recovery disk. hope someone can help me here,

  1. how to operate again?

  2. How can I get the files in the desktop?

  Jin

  > I'm stuck with black repair screen of windows startup with the able to move mouse cursor.
  > Normal windows startup ends with a blue screen:
  > "unmountable boot volume".

  How did you start problem start? I mean if you have installed any driver or application or smth like that... In your place, I would like to reinstall Os than to try to fix it.

  > How can I get the files in the desktop?

  If you have important files smth on your hard drive, you can use Windows live cd to move them to a usb drive.
  By the way, have you tried to enter safe mode?

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer restart itself and come up with a 'blue screen '.

  What could be?
  How do we prevent it?
  How did I get it?

  I have absolutely no idea about it so I can't give much info, but as far as I know is it turned off my computer, and then comes up with a blue screen and restarts my computer.
  It happens on a regular basis or not at all in a day. I want to stop now so it doesn't happen in the future.
  Please a little help... It happened for about a week and a few days now and I want to stop it.
  I did not have a chance to read what is said on the blue screen, but I've seen the word "pen-drive" used and I have no idea what it means. I'm not a computer genius, but I hope that you are!
  Thank you very much
  Zoe.

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

  Hello world

  I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

  It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

  Can someone give me advice? Thanks in advance

  Klaas

  Hi Klaas,

  It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

  To disable the auto restart: -.

  1. right click on 'My computer' icon and then click on "Properties".
  2. click on the "Advanced" tab
  3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
  4 uncheck 'automatically restart '.

  Please post again all the details of the blue screen error message.

  concerning

• I have problems with random blue screens - 1st BC Code - of the suggestions?

  I have problems with random blue screens - 1st BC code - all others are zeros.  6_1_7601 OS version, produced 768_1.  Any suggestions?  My computer is a model of HP P7-1235.

  Thank you.

  The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

  Bugcheck 1E, {0, 0, 0, 0}

  WARNING: Unable to verify timestamp for amdxhc.sys
  ERROR: Module load completed but symbols can be loaded for amdxhc.sys

  Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

  WARNING: Unable to verify timestamp for usbfilter.sys
  ERROR: Module load completed but symbols can be loaded for usbfilter.sys

  The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

  The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

  Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

  HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

  I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

  You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I recommend to create a System Restore Point before installing the new motherboard drivers.

• Help me with this blue screen!

  My computer has been infected with control of HARD disk about 12 hours ago, and I tried to remove it with Malwarebytes, but when he scanning, virus above toke and shuts down my computer. When I tried to restart, a blue screen appears indicating

  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0XB84E3524, 0 X 0000034, 0X00000000, 0X00000000)

  Please help me! I need to go beyond that to remove this virus. I tried to go through safe mode and all the options available when I restart my computer.  If you know a way you could help me please to share information.

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Games Crash with error blue screen - HELP!

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA800630B010
  BCP2: FFFFF8800516BF60
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\030814-13291-01.dmp
  C:\Users\tori\AppData\Local\Temp\WER-30763-0.SysData.XML

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Please help me with my blue screen of death

  Hey there im not warned at all first pc, so you will have to walk me through things to get the info well :) sorry.

  So I brought a hand 2nd pc for a few months now and I play a game online and not all the time but sometimes it will freeze and back, and a small error in a box by the time and date appears saying something like "display driver NVIDIA windows kernel mode driver, has stopped responding and recovered. But sometimes he goes to the BSOD and its really starting to get worried. Now, I looked on the NVidia site and other forums but no answers or even any I can understand I have taken some steps that a few people have said to do, 1 is I did ensure that the driver is updated and is also cleaned installs a million times, 2 restored of the pilot, 3 has changed the graphics settings to lower levels and stuff , but nothing has worked so far sometimes I usually get a BSOD for weeks and sometimes, I get 5 times a day.

  It's the basis of it don't know if that is all the information you need help (im guessing not) but ill try to help your help me best I can

  Oh my current video card is also a GeForce 9500 GT im running windows 7 64-bit Intel (r) core (TM) 2 duo CPU E700 @ 2.80 GHz and 4 GB of ram do not know if this is useful

  Please read about your BCCode: 116.

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.
  *
  If playing with video driver versions did not help, make sure that the box is not overheated.
  If you have a desktop computer, try removing a side panel and a sector large fan directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.
  *
  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  *

  For more information please read these links.

  http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx