Help with sound file

Hello. I am new to audition. I have a sound (hear here: https://dl-web.dropbox.com/get/Bass%20Boom%20With%20Reverb%20Sound%20Effect%20%20%20HQ.wav? _subject_uid = 112345765 & w = AACX... ) which is perfect for what I want, but it is much too low in volume. I tried spliter volume in hearing by increasing the level of the Db in the Panel of waveform and increasing the level of entry. However, these two methods makes the sound distorted and unusable. Is there a way to do it, or can someone send me a link to the creation of a pole high disembodied voice such as the file I linked above?

Thank you and best regards,

WLM

I'm under Win 8.1 with a card realtek sound. audition CC 2014

"it's far too low in volume. (!!)

Open the file in AA CS6, I see that the waveform peaks are already above 0 dB, not surprising when you are trying to "volume up" it distorts!

Although not at all an expert in this field, I would suggest trying something like effects > Amplitude and Compression > hard limiter, perhaps the value ' limit to-.1dB "and perhaps experiment with the parameter 'Boost of entry' (default is + 6 dB, it should be possible to increase this) but it must be remembered by stimulating the entrance and by limiting the peaks will allow you to reduce the overall dynamic range.

Probably you are trying to create some sound effects "earth-shaking"?

Tags: Audition

Similar Questions

  • Problem with sound files - appear as "unknown".

    Hello world

    I just bought a 8 GB Clip + to replace an old Creative Zen. I don't sync most of my music to the player last night no problem at all, but the audio seems to be another issue...

    I updated the drive with the latest firmware and tried to copy the files to the Clip + mode MTP and MSC, as well as with the latest version of Windows Media Player - the problem is that .aa files do not appear at all in the folder of audiobooks on the drive or appear as "unknown". The Clip refuses to read the file 'unknown' and shows a duration of 0.00.00 - oddly enough, if you check the news of track for the file, he referred to corrrectly an audible file with the title and the time everything is OK.

    Extremely frustrating as one of the main selling points for me the Clip + was alleged compatibility with files sound then I would be really grateful if anyone can someone offer advice as to the cause of the problem - I know someone else had a similar problem when you use a Mac (see this thread)

    http://forums.SanDisk.com/Sansa/board/message?board.ID=ClipPlus&message.ID=823&query.ID=50730#M823

    but I'm on Windows 7 at home and had no better luck using my PC to work that is running Windows XP.

    Thanks in advance for any advice!

    With the latest versions of firmware, the Clip + and Fuze will work with the files in the Audible Format 4 or Enhanced (.aa or .aax) format.  Check your client Audible (Audible Manager) to the selected format.  If the files are of size 3 or less, this could be your problem.

    Do you use the Audible Manager or Windows Media Player to transfer the files to the Clip +?  The Manager works best.  Do not forget that the Clip + has been authorized using the Manager.

    microsansa

  • Need help with raw files

    I reinstalled and updated CS5, but I'm unable to open camera raw to my Canon Rebel T4i. I get the following message:

    Could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw.

    Please visit the Camera Raw help documentation for more information.

    Camera Raw is a plug-in in Adobe Photoshop, Photoshop Elements and Lightroom dealing with Raw files. Camera Raw should be updated for each new brand and model of camera that comes on the market. Camera Raw is frequently updated, but not all versions of Camera Raw are compatible with all versions of Photoshop.

    See 't-my-version-of-photoshop-or-lightroom-prise in load-my - http://blogs.adobe.com/crawlspace/2011/03/why-doesn camera .html

    According to http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

    the rebel T4i was first supported by Camera Raw 7.1.

    Camera Raw 7 + is only compatible with CS6 and higher.

    http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

    Your choice:

    1. CS6 update
    2. Join the Cloud
    3. Convert all your T4i Raw DNG files using free Adobe's DNG Converter
      http://www.Adobe.com/products/Photoshop/extend.displayTab2.html
      Then, edit the DNG in your existing CS5.
  • Help with Raw files

    I use an Imac with processor PowerPC G5 2.1 Ghz running OS X 10.5.8 and Photoshop CS2.  I just bought a Nikon D300s and want to work with raw files.  Adobe told me that I need to CS5, which means that I would need to buy a new computer.  Is this in any way about this?

    You will need to convert your raw files to DNG with Adobe free Converter: http://www.adobe.com/products/dng/

  • Help with image files, drop box and save the changes?

    My husband put all our photos of drop box.  They are still on our computer, but we can now also access elsewhere.  But it has somewhat modified files.

    I'm putting together, cultures and (in general) to save the changes made to some images.  But I get an error.

    Example: The image I want to change is on the side.  I right-click on the file icon and select "Rotate clockwise" in the menu dropdown. Immediately, I raise the sound "bonk" and an error message appears: "you cannot rotate this image.  The file can be used or open in another program or maybe the file is read only.  It wasn't a problem before doing things to the drop box.
    So, I wait to make sure that everything is ok.  The image is not open anywhere else.  I clicked the properties option to see if it is in read-only mode.  He said that it is not.
    When I open the image and try to use the rotation on the bottom, it will turn.  But when I close the window, I get a different error message that says "Windows Photo Viewer cannot save changes to this picture because there is a problem with the properties of the image file."   There is a link at the bottom of the message box for "Why can't save this picture?  I clicked it.  He said "the subject you are looking for is not available in this version of Windows. For additional assistance, see multiple support options. "The more support options?  Get a tech savvy friend who could help me. Nice.
    Anyone know what I need to do to make this work?
    I don't know what version of windows we have.  I'm sure that's not Vista.  It's the one after that.

    Hello

    Thank you asking in the Microsoft Community.

    1. open Microsoft paint.

    2. navigate to the image through Microsoft Paint.

    3 try to rotate and save the image.

    4 let me know if you are able to.

    Post back with the result.

  • Satellite U940 - 11b - need help with recovery files

    Madam/Sir,

    I have a question about a failure U940 - 11 c.

    The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

    Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

    1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

    2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

    3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

    4. the disk is allocated:

    Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

    Hello

    I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
    If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

    Tom BR

  • I'm trying to get help with corrupted files or missing. I can't use my recovery Cd, because the file is missing in order to make it work properly.

    I tried to use the restore cd that came with my pc it want to work because it lacks the file I need to perform a recovery and try to fix it. Some of my updates are not installed.

    Hello

    1. have you received an error when update failed?
    2. that you get an error message saying that some files are missing or corrupt?

    You can check for errors in the Windows Update history.
    To check the update history:
    a. Click Start, click Control Panel.
    b. now click on Windows updates.
    c. click view update history.

    Refer to this link for help:
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    Try to analysis of SFC (System File Checker) running on your computer.

    Scan SFC will Windows replace corrupted or missing system files on your computer.
    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow

    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833

    Let me know the exact error messages and also a brief description of your problem so that we can advance troubleshooting.

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • the Windows media player 12 will not play 3gp (from mobile phone) with sound files

    I have windows 7 media player 12 and when the videos are downloaded from phone video shows but with no sound. Have all the updates so far I know. Turn windows media player

    12.0.7600.16415

    Hi vett82ce, 

    You will need a codec to play the video file. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use the codec to play and create digital media files.

    You can check the link to see the guidelines on the issue below:

    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    You can use the link provided below and check if you get the necessary codec to download depending on the type of file, you try to play.
    http://www.Microsoft.com/downloads/en/default.aspx

    You can also use your favorite search engine to download and install a codec based on the file type, you must use.

    NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Kind regards

    Gaurav Prakash - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Need help with eps files

    Hi all I bought this stat reflections eps file, I want to use the icon in the lower right, but do not know how to separate the background... I need like a png... Oh can smart designers, anyone help? 10967425_s.jpg I tried to download the eps, but was not allowed to download it... Please please advise!  A big thank you.

    Here's a quick I did with the starfilter. It's a 1000 pixel wide PNG, so if it's enough, you can try this.

    Put it in "Screen" blend mode on your image, and it will look something like this:

  • Need help with sounds.

    Hello, I'm an AIR application, an MP3 player. And well, I don't want just to play MP3s. When I export a sound WAV of hearing and trying to play the MP3 player is showing the sound duration and information, but does not have it. Any suggestions?

    Documentation (http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204 - 7d27.html) the help of the Flash...

    «Although there are various audio file formats used to encode the audio digital, ActionScript 3.0, Flash Player and AIR support audio files that are stored in the format mp3.» They cannot directly load or play audio files in other formats such as WAV or AIFF. »

  • Need help with sound

    I can't no sound on you tube, there is an X next to the icon of the sound that I can't remove.  I use Windows 7 & Firefox.  Flash player is 11.7.700.224.  Would appreciate help.

    My email is [removed] .  Thank you

    Click the "speaker", waiting or drag the slider to increase the volume in a single action. You may need to do more than once.

    If this is not enough to look at if you have recently installed a blocker of advertising or any other add-on - we (s) in your browser try turning off / them, because they may interfere with the functionality of the site. You can also try to clear your browser's cache/cookies.

  • Help with html files when you place the overlay Web content

    Hello

    We have an educational application with plenty of interactive exercises - which were originally designed in Flash.

    I have converted in HTML using Wallaby fla files. For each fla file, Wallaby creates a js, css and html file but also an active file.

    When I place the frame Web Content, and then link it to the html file, it link to the real HTML created Wallaby? It wont let me select the folder containing all the files in that, and I can't link to a zip file either... Then, how it recognizes assets if I select only the html file? (see screenshot)

    Screen Shot 2013-03-28 at 2.09.20 PM.png

    Or do I need to add a HTMLResources file and bind it to who?

    Thanks in advance for any help.

    You a link to the HTML file but make sure that these things are in their own folder or InDesign will add EVERYTHING in the folder that has the HTML in there.

    Bob

  • help with sound

    I created a movie in After Effects and I'm exporting to Flash to create a SWF with player controls of the skin. When I import the .mov file, I created in After Effects into flash and add the look of the player and publish the file it was not attached to the video of his. The codec used is H.264, linear PCM.

    Any help is appreciated! Thank you

    You must export a flv or f4v to sequels and then use the flvplayback component in flash to display your video with the player controls.  There are a variety of skins for flvplayback that you can choose which have a range of controls.

  • Need help with exe files.

    I am looking for an exe file to play on the laundry. How to insert the exe file in dreamweaver 8 to play when the page is loaded. Very similar to a flash movie is loading. The file is created with the extension exe and I can't change it or recreate. any help is appreciated. Thank you

    In general you can not do this on anything other than an intranet. Is it
    where you work? If so, then you should investigate using
    ActiveX to run this exe file - check the Microsoft site...

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "brananc1" wrote in message
    News:ee265m$LCT$1@forums. Macromedia.com...
    > I'm trying to get an exe file to play on the laundry. How do I insert the
    > exe
    > file in dreamweaver 8 to play when the page is loaded. Very similar to the loading
    > a
    > flash animation. The file is created with the extension exe and I can't
    > change
    > who or recreate. any help is appreciated. Thank you
    >

  • Convert mpg with sound file

    I 'film imported' in flash using the default settings. Video conversion seems to have worked, but it doesn't seem to be any sound. I've done the obvious tinkering with volume. What I have to do something different before import or I have to make an adjustment on the already converted file?

    The default settings of the import movie process leave the integrated sound in the video clip, which means that you must export the SWF file to hear it.

Maybe you are looking for

  • Power supply selection guide

    This MOD can make a post-IT. Here is a general guide on how to select a power supply for your HP desktop computer.  The majority of the standard ATX power supply (PSU) must fit in an envelope of HP.  The exception would be a slim casing or the esoter

  • Qosmio X 500-116 - Pinch Zoom on Synaptics touchpad sometimes does'nt work!

    Model - Qosmio X 500-116 (windows 7) Hi all I m occasional annoying problems with my Synaptics touchpad V7.2 Every now and again the Pinch Zoom on Synaptics Touchpad does not work (it happens about once every 5 cycles). When this happens, I m impossi

  • Hello, I have an Aspire E1-531-2438

    Apparently this isn't on the list for compatible with the upgrade of Windows 10, plus I have Windows 8 and you must have 8.1 upgrade to 10? Is it possible, or it will never drivers where I can get 10? Said that I'm not able to move to 8.1, is not com

  • Report for cartridge JavaEE

    Is it possible to run a report for the JavaEE cartridge that shows what he's watching, and what are the thresholds for each?

  • Cannot find the rip in reading or library button in Windows Media Player 12

    Original title: no rip button When I open media player I don't see the rip in reading or library button