Help with theft by a lyrical text video

Similar Questions

• Help with an overview on the text (?)

  Hello

  I think that it is a really basic query. I got the below logo done for me - could someone let me know how to get the thick white border around the black text please?

  I need to create another word and want the same style.

  It was created with Illustrator (which I have), but I also have Photoshop too if that helps!

  Thank you

  

  I always did it with a bold line, but average of Monika using the offset path gives better results in sharp corners.

  I tested out and found more sense for how fill colors and offset are presented, if you add 2 fillings to the appearance, if not the text color is not displayed until you select the text with the text tool, then you can see it in the appearance Panel.

  addition of 2 fill x allows you to edit all the colors and appearance in the same place.

  This is not necessary if the text has been exposed, the object was not the living text I think, what nickname said...

  Oops - sorry just realised I cut the menu for shift! -again according to the directives of the moniker but here >

  

• Help with a clipping mask and text!

  

  This was really frustrating me.

  Design of this logo at the mo - the circle is a form and the L is just type on a separate layer on top with the same color as the background. What I want, it's to make the cut in the circle so that it is essentially transparent, where I can place on any color background and L will mix it naturally without color cast of 'L' evolving.

  Any ideas guys? With the help of CS5. I'd appreciate any help.

  Hello

  One way is to put your text and circle in a layer set, then together the mix Options: custom to zero fill and Knockout at shallow depth.

  The layer that lies directly under the layer group appear throughout the text.

  

• help with a simple user interface for video flv with benchmarks AND buttons

  Hi all

  OK, I built a very simple FlashDrive using the componet video and I used in the flv file cue points, then I used simple buttons and findcuepoints code snipets for make my buttons go to a certain part of the movie.

  Everything works very well.

  Now what I do is when a certain amount of point play button stay an overstate and once made part of the video or another button is clicked on the first North of the State and the new part back button or the new button have the overstate.

  I think it will be an easy task, I'm not sure how to in this regard.

  Any help greatly appricaited.

  code below

  start_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
  
  function fl_ClickToSeekToCuePoint(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch1");
      vid.seek(cuePointInstance.time);
  }
  
  
  ch2_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_1);
  
  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch2");
      vid.seek(cuePointInstance.time);
  
  }
  
  ch3_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_2);
  
  function fl_ClickToSeekToCuePoint_2(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch3");
      vid.seek(cuePointInstance.time);
  }
  
  ch4_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_3);
  
  function fl_ClickToSeekToCuePoint_3(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch4");
      vid.seek(cuePointInstance.time);
  }
  
  ch5_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_4);
  
  function fl_ClickToSeekToCuePoint_4(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch5");
      vid.seek(cuePointInstance.time);
  }
  
  ch6_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_5);
  
  function fl_ClickToSeekToCuePoint_5(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch6");
      vid.seek(cuePointInstance.time);
  }
  

  I try to help, but you will need to apply your neurons to make it work with what I have already explained (three times with what I propose below).  Try something like the following (I'm rename your buttons for ch1, ch2, ch3, ch4, ch5 and ch6 so that the same functions can be shared by all the buttons...)

  This affects the listeners to all 6 buttons

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .addEventListener (MouseEvent.CLICK, fl_ClickToSeekToCuePoint);

  }

  It deals with one of the 6 inclinometer when they are clicked

  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void

  {

  BTN var = event.currentTarget;

  var cuePointInstance:Object = vid.findCuePoint (btn.name);

  VID. Seek (cuePointInstance.Time);

  resetButtons();    What makes all the buttons back to normal

  btn.upState = btn.overState; What makes the States of change of the button clicked

  }

  function resetButtons (): void {}

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .upState = this ["ch" + String (i)] .hitTestState;

  }

  }

  To do this, your buttons need to have the same work as part of hit as they do under the top.

• Need help with the alignment of the text

  I don't know the answer to this question is simple, especially since I have no chance of finding the same question asked previously.  I want middle align text so that it is centered between the top and bottom of the box / text field created using the "text" tool  Frame on the left is simple: I just click on the button "align left" on the text panel.  There is no button to the top, in the Middle, or align at bottom.  In fact, when I'm done with this question, I'll go ahead and present it as a new idea!

  I also need to do the same with the text I add the vertical menu widget (menu manual buttons)... If there is a big difference in the way in which this is done, please let me know.

  Here is an example of what I'm willing to do.  Yes - the bottom image is a composite, then please ignore the spaces at the beginning of the text.  I also wanted to "align middle" instead of "align center".

  

  Thank you!

  If you want to center align text vertically, use top padding spacing Panel and change the desired number of pixel values (depending on the size of the text block).

  Also, you can use whole pixel values absolute for all major (i.e. 16 px) values rather than the values of percentage (120%) that are managed differently in different browsers.

  Here's a screenshot of the sample with settings that worked for me in my case where the text appears to be centered in all major browsers.

  

  You can also watch follows her thread that should answer most of your vertical alignment related research.

  http://forums.Adobe.com/thread/996101

  Thank you

  Vinayak

• Help with Cinema 4 d Lite text object

  I'm trying to use Cinema 4 d Lite for the first time, but a large number of options that should be here are not. Under MoGraph, the only thing it is fractured and effector. There are no other options. How can I make it appear? I know it's a light version, but there should be more options (like text object) it.

  MoText doesn't even come in the full version of Cinema 4 d If you get the premium version or view it. You need a Broadcast or Studio version to have MoText. Now, you have the option of spline of text (which you can then put into an extrusion object), so you should be able to make a 3d text quite easily without MoText.

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• Help with my video card installation

  For about 5 months, my uncle crashed his computer desktop HP Pavilion a6330f, pre-installed with Windows Vista, then he gave it to me, and I formatted the HARD drive and Windows XP Professional SP3 is installed. I installed all the drivers needed to access the Internet and then I carried others away. Here is the problem.

  OK, so I got a new HD of VisionTek Radeon 3650 OC edition 1 GB GDDR2 video card. I went to VisionTek.com and got the same driver I needed, installed and restarted my computer, then I go into my BIOS and put my graphics card to PCI x 16, which is what the map is well connected and must also. Can I connect my monitor to the video card (Acer P206HL) and nothing comes, kaput. So I plug it into the built-in slot. I check my system info, it says that I always use the integrated card GeForce. But I don't see anything not connected it. Someone help please, I want to use my video card, because it's the only thing that keeps me playing Skyrim.

  > I went to VisionTek.com and got the driver very
  > I wonder if it's just an XP incompatibility
  If you got XP drivers on this site while there could be no incompatibility
  
  Any pci slot works?
  (Ok - fans are running...)
  Or see if bus pci/pci-bridge Device Manager works (under devices sytem).
  
  Hmm, looks like pci is the cause of the accident of your uncle had.
  > I had a new VisionTek Radeon HD 3650
  What happened with that your uncle?
  
  C.
  P. S.
  You can check the slot if contact is folded.

• Video help with your HP product

  Written instructions are nice and all, but sometimes I look at a video can be even more useful. HP has many support videos found on YouTube with a wide variety of different bugs and solutions to common problems, computer and printer.

  Learn how to get help with your printer HP with HP Total Care Support.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  YouTube.com/hpsupport is not the only one.

  Also check out youtube.com/justprintingaround and youtube.com/hpprintersupport

  I hope everyone finds it useful.

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• Video recorded with digital camera includes the text

  All the videos that I download from camera screen "Current Frame", "CPU load", "Output size" and "Size of entry". Help me get rid of it?

  After recording a video from my digital camera and then download it, while I watch the video, there are words anywhere in the entire video.

  Saying:

  The current image: 27 (* just a bunch of numbers, running up to and upwards and upwards)
  CPU load: 26% (* any percentage, running up to and upwards and upwards)
  Entrance Dimensions: 320 x 240
  Format: 320 x 240

  -What this means and how do I get rid of him? I can't even burn these videos on a DVD without him appearing on the disc.

  Is the camera, with that I use to download videos my camera digital; Sony Cyber-Shot. Model DSC-S730

  Hello
   
  1. have you had this problem since the first time you connect your Sony Cyber-Shot. Model DSC-S730 to Windows 7?
  2. on what application you are trying to watch the recorded video?
   
  Issue seems to be with the camera.
   
  Contact Sony because I think they are the best people to offer assistance in this regard.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Help with a script that converts the HTML object text box

  I don't know anything about programming scripts and unfortunately inDesign isn't any panel actions as Photoshop..

  I need a script to convert a text box with HTML code inside a HTML object... I think not, it should be very difficult

  How could be the following:

  (1) select the text box
  (2) cut all text inside
  (3) remove the empty box
  (4) select selection tool
  (5) go to OBJECT/INSERT HTML
  6) paste it into the code before you cut the text box
  (7) OK and close the menu INSERT HTML code

  If the Script works, we could change with HTML code inside a text box to an object HTML (video, card, animations,...)

  The first step could be manually selecting each text box or by selecting all of the boxes that start automatically by "< iFRAME '

  1000 thanks

  Remember that you can not get an answer it if you don't show any attempt of your choice.

  FWIW

  Loïc

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• Need help with text in After Effects

  Hello!

  I'm new with After Effects and need help with something that should be simple.

  I use the effect of the stroke and Freehand drawing, and I'm trying to get the text to go from left to right, but for some reason any, that it seems to be random.

  Any ideas?

  Click and drag as you would layers.

  If you're new to AE, it would be a good idea to take a step back, take some time and go through these resources. Have solid foundation in how AE work will make things go a lot faster and with much less frustration.