Help with VMware Fusion... VM does not start... Please :)

Similar Questions

• Windows 8 OS invited on host windows 7 with VMWARE 9.01 does not start

  Then Windows 7 host has a processor Quad-Core AMD Athlon (TM) 9600B with 8 GB

  I tried to install windows 8 64-bit and 32-bit windows 8 and also upgrade an OS called windows 7 to 64-bit.
  I becam a black screen:
  Your PC needs to restart.
  Please hold...
  Error code: 0x000000A-> by the 32-bit guest operating system
  ...

  Error code: 0x00000C4-> by the operating system called 64-bit

  What's wrong?

  Try to set

  Data Execution Prevention
  * Disable
  Enable

  to "Enable". After you change this setting, you will need to power cycle the system.

  André

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Satellite T130-11u with Intel CPU Q300 does not start

  Hello

  I installed a Q300 240 G in my T130 LU.
  It does not start.

  I tried to use the restore disks, everything went well.
  But it's boot after that... it's LAN check while the boot device is set to Q300.

  I tried with a Windows disc.
  It says that the disk is locked and I need to unlock it. (Messages are in French).

  I forgot something?

  Concerning

  Jean-Luc

  Automatic response...

  I managed to get to start.

  I had to put:
  "Exectute-disable bit capability" to [Disabled]
  "Control" mode SATA [compatibility]

  After that, I managed to install the system and start (most important) it.

  Once the system was working, I have reset these entries to the normal configuration without any adverse effect.

  Concerning

  Jean-Luc

• Need help. After the installation does not start Lightroom 6

  I am a subscriber of plan of photography and just upgraded my copy of LR of 5.7.1 to 6.0 through the creative Application of cloud. Unfortunately, when I click on the shortcut of Lightroom on the windows desktop or when I try to launch Lightroom 6.0 in the menu file directly, nothing happens, which is Lightroom does not start and does not present as an application running in the Manager of tasks). I tried uninistalling and reinstall Lightroom 6.0 and the computer restarts, but none of these has solved the problem. 6 of Lightroom won't start or run. Does anyone else have this problem or is anyone know what I can do to get Lightroom 6.0 to run?

  HA, I found help in this thread: LR CC 2015 hangs after installation on Yosemite 10.10.3

  I just need to log out of my account in the creative cloud application, sign and everything started working again!

• a necessary component of windows media does not start Please restart windows media

  When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?

  When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?

  1] start the system as an administrator .

  [2] make sure that Media Center is closed.

  [3] open the command prompt and type in the following commands it. Each time, press ENTER after the command.

  regsvr32 jscript.dll
  regsvr32 vbscript.dll
  regsvr32 wmp.dll
  4] reboot the machine.

  5] restart the Media Center.

• VMware Fusion/Bootcamp does not properly.

  I'm under VMware Fusion 2.07 (Yes, I know version 3 came out, but money was tight) on an iMac 20 ". Mac OS X 10.6.4. I recently had the hard drive in this system upgrade, 300 GB to 1.5 TB; new installation of Mac OS X, all restored since my Time Machine backup, then installed Windows XP Home Edition, using boot camp. (300 GB partition.) So far, so good; It works well.

  When I say VMware to start the Bootcamp partition as a virtual machine, it goes through the usual process, then comes up with the dreaded error message: "the Boot Camp partition is not prepared to stand as a virtual machine. It seems that Windows is not stopped properly the last time it was used. »

  I tried to remove my configuration of VMware; I checked the partition tables and the types (the MBR and GUID alignment between them - as I told Windows to reformat the partition, rather than change the partitioning, it is what I expected); everything seems to be correct. I noted, however, that vmware-rawdiskCreator and fdisk print the size of the partition HFS + sub-1994391552, which seems to be strangely close (ie: bang on) an integer signed enveloping output in comparison with the tool GUID of. In exactly the same way, the beginning of the Windows partition is printed as 1993717760.

  Is it possible that this affects the failure, or is it just a loophole? I'm getting a little testy (although not significant at this stage, since I can afford now space drive needed to have a separate Windows for VMware image instead of joining the two together). I have attached the vmware.log in the hope that it might be useful.

  Your muchly.

  If the chkdsk command and Windows clean restart does not help, the only alternative is to force the partition to mount using the virtual machine. However, this should only serve as a last resort, since it can potentially corrupt data on the Windows file system. Make sure you have a backup of important data on the Boot Camp partition.

  To force the partition to mount, you will need to replace one of the files of the virtual machine for assistance. Go to Applications/VMware Fusion.app/Contents/Resources/naos-1.0.vmwarevm/ (use right click and view the contents of the package to get inside VMware Fusion.app and Ban - 1.0.vmwarevm). Then delete (or move to a backup) the reconfig.iso of the file and replace it with the version attached to my message.

  Note: this file is designed to work only with Fusion 2.0.7. Use it with newer versions will probably fail.

  This should allow the reconfiguration step to cross, and Windows can perform a check disk on first boot. If it isn't, it's probably a good idea to run chkdsk /f just in case.

• Fusion drive does not start?

  • MacBook Pro mid-2009
  • Running OS X Yosemite
  • 320 GB internal HARD drive
  • replaced the optical drive with 240 GB SSD
  • replace the 4 GB of RAM with 8 GB of RAM

  After the replacement of my optical drive with an SSD, I booted the laptop and checked the disk - it showed up as a normal external drive. I then, in accordance with the guide to formatting a drive of Fusion (combined capacity of the two HDD and SSD), found here, booted the laptop into recovery mode at the entrance to the commands in the terminal. the commands I entered were the following sequence

  diskutil list

  diskutil cs create disk1s2 disk0 [ArbitraryName]

  diskutil createVolume [UUID here] jhfs cs + [ArbitraryDriveName] 100%

  After that, my records indicated were over 240 GB SSD and Macintosh HD 320 GB but Fusion drive 560 GB - I thought: Hey! great, it worked... However, when I restored it to my time machine to the top of my 3 TB external hard drive, which took a few hours, I was met with the error gray screen instead of a login screen.

  I have my time machine to the top, so im not worried about my data, but when I was able to boot into recovery mode (when it is connected to 3 TB external HD) I deleted the Fusion drive and tried to reinstall a new OS from Yosemite, but of course this returns the same error as before starting. This leads me to believe something is damaged with the fusion drive, maybe its lack of OS startup, but would not restore or reinstall OS to solve this problem? I ran a diagnostic on the drive of fusion are deleted and it gave me the error code of output 8. I will update with a screenshot of the Terminal

  What can I do to cancel my fusion drive and try to start over again?

  any help would be greatly appreciated...

  I don't know about you, but I thought that the HARD disk must be placed in the Bay of optics and the SSD drive in the HARD drive Bay where the original HARD drive is.

  So, have you tried to reverse the readers in the bays (SSD in a drive Bay HARD and HARD drive in the Bay optical) and recreate your Fusion drive and then either restore or install OS X?

• I need help with copy and paste does not

  I already asked this question, but no one seems to want to help or does not know the answer.  I can't afford to pay microsoft $49 help. It is their dang opertating system and you would think they would help the customers who buy their products.  Don't think!  Please, someone help me.  I am a graphic designer and need to copy and paste all the time, but it does not work.  It's so frustrating.  Should have bought a Mac time... next.  If no one here can help... where can I go for help?  Here the question again.

  Copy and paste the orders have stopped working in all my software programs (Photoshop, CorelDraw, Corel Painter, etc.).  When I type "copy", or "control c", it crashes and whatever program I use becomes inoperative, as well as all my programs, until I can get the specirfic program to close.  I ran Services.msc to ensure than the Clipboard (did not find Clipboard so I assumed it was changed to album) has been activated, which he was, but when I click on 'Start service' it says "cannot start service on local computer album.  "Error: 1068: the dependency service or group could start. It started several weeks ago and I have not installed new programs during this period.  Only my computer display was the automatic updates of Windows.  It's very frustrating... How can I copy and paste to work.  I got this computer less then 4 months.  Thank you

  To all with this problem, try this:

  http://support.Microsoft.com/kb/309662

• Torch 9800 blackBerry Smartphones does not start, please help

  My father was a game in his torch, then he suddenly crash like button works / stop does not work he removed the battery and reinsert it, after that bb keeps on restart loop I tried starting it works then I ask him to remove the application that does crash after reboot I can't transcribe this safe mode and the phone always reboot loop After downloading Director of office of BB I tried to connect the blackberry it recognizes torch 9800, but there is nothing I can do about it. After searching a bit I found "common files" apploader folder might help so I took the opportunity to remove the other app, still does not work in the end, I use apploader /resettofactory to reset the device, it shows a white screen with a bar saying wiping files. After reaching 100% and restart my phone still in restart loop. What should I do now?

  Thanks before

  Hello and welcome to the community!

  You really need get in Mode safe mode again so that you can reload your operating system. You would have gotten lucky that first time with the right timing on the keystrokes... Keep train... I remember it taking a lot try until I'm a model to go properly in Mode without failure.

  Otherwise, these articles may be useful:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck!

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• VMware-vcd service does not start: VCD 5.1.3

  in vcloud-container - debug.log

  
  

  2014-05-19 18:13:15, 214 | ERROR | Start the level event dispatcher. ContextLoaderListener | Application context update failed (OsgiBundleXmlApplicationContext (bundle = com.vmware.vcloud.common.core, config = osgibundle: / META-INF/spring/*.xml)) |

  org.springframework.beans.factory.BeanDefinitionStoreException: definition of invalid bean with name 'productBuildDateBean' defined in URL [bundleentry://187.fwk1318663487/META-INF/spring/bundle-context.xml]: could not resolve "product.build_date" placeholder

  at org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.processProperties(PropertyPlaceholderConfigurer.java:287)

  at org.springframework.beans.factory.config.PropertyResourceConfigurer.postProcessBeanFactory(PropertyResourceConfigurer.java:75)

  at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.invokeBeanFactoryPostProcessors(AbstractDelegatedExecutionApplicationContext.java:479)

  at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.invokeBeanFactoryPostProcessors(AbstractDelegatedExecutionApplicationContext.java:450)

  at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.invokeBeanFactoryPostProcessors(AbstractDelegatedExecutionApplicationContext.java:395)

  to org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$ 3.run(AbstractDelegatedExecutionApplicationContext.java:281)

  at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)

  at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.startRefresh(AbstractDelegatedExecutionApplicationContext.java:247)

  at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor.stageOne(DependencyWaiterApplicationContextExecutor.java:214)

  at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor.refresh(DependencyWaiterApplicationContextExecutor.java:169)

  at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.refresh(AbstractDelegatedExecutionApplicationContext.java:175)

  to org.springframework.osgi.extender.internal.activator.ContextLoaderListener$ 2.run(ContextLoaderListener.java:716)

  at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:48)

  at org.springframework.osgi.extender.internal.activator.ContextLoaderListener.maybeCreateApplicationContextFor(ContextLoaderListener.java:781)

  at org.springframework.osgi.extender.internal.activator.ContextLoaderListener.start(ContextLoaderListener.java:410)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:783)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:774)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:755)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:370)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:374)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1067)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:561)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:546)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:459)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:440)

  at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)

  to org.eclipse.osgi.framework.eventmgr.EventManager$ EventThread.run (EventManager.java:337)

  can check you your global.properties file in the etc / folder in vCD installation directory.

  see if a line as follows:

  Product.build_date = 2013-12-18 T 22: 43:42 - 0800

  It is usually located around these lines:

  Product.version = 5.1.3.1489357

  Product.build_date = 2013-12-18 T 22: 43:42 - 0800

  vCloud.Cell.IP.Primary = 192.168.0.232

• Help with Vmware Fusion & SBS 2011 Essentials; best practices

  Hi all

  Looking for a little help setting up a virtual machine on a Mac Pro to use as a server in a small business.

  We currently have an office of 6 users, all but one of which are windows users (XP and 7, although all soon to be upgraded to 7). Also, we have a Server SBS 2003 and until recently used it for storage of files, a database principal, Exchange and vpn. The server hardware has become very noisy to the point of this embarrassing other users in the room I'm looking to upgrade options.

  The machine I use now is a 2 x 2.66 GHz Dual Core Intel Xeon with 10 GB of RAM and I'm looking for this move with the to use with the server I'll be swapping to a MBP 17 ". I installed a trial version of SBS 2011 Essentials on it and have successfully installed the main and used database from a client machine so I'm glad that everything will work. We went from the e-mail Exchange on Gmail, which is why Essentials is good enough for me.

  I'm stuck now with what to know how to set up the machine to integrate properly. I have a 250 GB boot currently installed with Snow Leopard disk and that you have ordered 2 x 1.5Tb hard drives I had planned mirror in OS X using disk utility. The plan was part of the 250 GB boot drive partition (say 100 GB) to use as a separate partiton on which to store virtual machines. The record 1.5 to had to be kept separate and used as a data reader.

  I'm not sure now, that's how all of them work with SBS 2011? Can I move forward as expected and share the drives through OS X (SL or Lion server) as a network share? If so, how it plays with windows clients? Can I use AD control connections or I end with a mixture of OD and AD (which would be an argument)

  Or should I install SBS 2011 on the disks of 1,5 to, spend the entire disk to SBS 2011 and treat sharing here?

  By train to these things is not a problem, it's just trying to understand what is the best solution for day-to-day management and backup.

  Thanks in advance.

  Give points to Woody, by all means!  Sorry that SBS isn't my area, but if you want to watch using scripts to control your virtual machine, you can find these useful URLS:

  http://communities.VMware.com/docs/doc-1201

  and

  http://www.VMware.com/PDF/vix162_vmrun_command.PDF

  Of course, you could also turn on the accessibility of Mac (System Preferences > universal access > enable access for assistive devices and use AppleScript or other Mac automation technologies, such as ATOMac (https://github.com/pyatom/pyatom).)

• Managing servers with virtual IPs / hostnames does not start

  Hi all
  
  I installed a cluster of OSB in load balancing and a load-balanced SOA (10.3.6) on two separate servers.
  
  -Server Admin SOA (runs on the server #1).
  -Server Admin OSB (runs on the server #2)
  
  I am using virtual hostnames for my managed servers of SOA and OSB, as follows:
  
  -Server of OSB managed #1: OSBHOST1VHN - ip: xxx.xxx.xxx.xxx (runs on the server #1)
  -Server of OSB managed #2: OSBHOST2VHN - ip: .yyy (runs on the server #2)
  
  -Server SOA managed #1: SOAHOST1VHN - ip: www.www.www.www (runs on the server #1)
  -Server SOA managed #2: SOAHOST2VHN - ip: zzz.zzz.zzz.zzz (runs on the server #2)
  
  -The BAM server managed #1: BAMHOST1VHN - ip: nnn.nnn.nnn.nnn (runs on the server #1)
  -The BAM server managed #2: ip: zzz.zzz.zzz.zzz - no name virtual IP here (runs on the server #2)
  
  I was able to start/stop the admin server managed nodes on each server so far Manager.
  Everything works great until we decided to stop the machines to add more memory.
  After the reboot, the servers admin started but not servers managed.
  Well, all the managed servers with vIPs failed, but the BAM #2 server started without any problems.
  
  For other servers managed, I get the following errors in the log files.
  
  # < 20 nov. 2012 15: 56 GMT > < error > < statistical ALSB Manager > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 9583013bf964d764:32a0a378:13b1e86ef73 :-8000-0000000000000010 > < 1353426960019 > < BEA-473003 > < server of ' Agra delegation not available. Cannot get the aggregator distance
  java.rmi.UnknownHostException: could not find URL for the server 'ms_prd_osb1 '.
  at weblogic.protocol.URLManager.findURL(URLManager.java:145)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:120)
  at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:76)
  at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$ 000 (ALSBStatisticsManager.java:38)
  to com.bea.wli.monitoring.statistics.ALSBStatisticsManager$ RemoteAggregatorProxy.send (ALSBStatisticsManager.java:55)
  at com.bea.wli.monitoring.statistics.collection.Collector.sendRawSnaphotToAggregator(Collector.java:284)
  at com.bea.wli.monitoring.statistics.collection.Collector.doCheckpoint(Collector.java:243)
  to com.bea.wli.monitoring.statistics.collection.Collector$ CheckpointThread.doWork (Collector.java:68)
  at com.bea.wli.monitoring.utils.Schedulable.timerExpired(Schedulable.java:68)
  to com.bea.wli.timer.ClusterTimerImpl$ InternalTimerListener.timerExpired (ClusterTimerImpl.java:254)
  at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:531)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  # < 20 nov. 2012 15: 56 GMT > < emergency > < security > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000015 > < 1353426963376 > < BEA-090087 > < bind to the configured Admin port the server failed. The port may already be in use by another process. >
  # < 20 nov. 2012 15: 56 GMT > < error > < Server > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < DynamicListenThread [Default] > < < WLS Kernel > > <>< 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000016 > < 1353426963376 > < BEA-002606 > * < cannot create a server socket to listen on the channel "Default". The 172.17.241.93 address may be incorrect, or another process is using port 7000: exception java.net.BindException: cannot assign requested address. > # < 20 nov. 2012 15: 56 GMT > < critical > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963377 > < BEA-000362 > < server failed. Reason: The server doesn't have to bind to any port can be used. See the log for details message. > # < 20 nov. 2012 15: 56 GMT > < error > < WebLogicServer > < svlvsoa08.vlv.arvato.fr > < ms_prd_osb2 > < < > main > < < WLS Kernel > > < 9583013bf964d764:32a0a378:13b1e86ef73: - 8000-0000000000000012 > < 1353426963387 > < BEA-000383 > < is not an essential service. The server will shut down >
  
  I tried to ping my vHOSTS:

  ping OSBHOST2VHN

  I managed to fix my VIP, so I guess they work properly.
  I checked the etc/hosts, and everything is set up correctly.
  I also checked config.xml (which I have not modified) and everything seems correctly (host, servers, IP, ports,...).
  
  The only one that has changed since the rebooted server is the setDomainEnv.sh in which I modified Xms and Xms values to increase the heap size.
  I only changed it on a single server to check if the settings we correctly applied.
  
  Can someone help me with this?
  
  Edited by: user13619168 Nov. 21. 2012 08:09
  
  Edited by: user13619168 Nov. 21. 2012 08:10
  
  Edited by: user13619168 Nov. 21. 2012 08:16
  
  Edited by: user13619168 Nov. 21. 2012 08:17

  seems you use duplicate port numbers, would you please change the port and make sure that it is not in use by any other process. hope this will help.

  -Negi Mukesh
  http://weblogicserveradministration.blogspot.in

• Screw LabVIEW compatibility helps with NI DAQmx device does not

  I use an old application written in Labview 7.1. Please see the attachment.

  now I use the same software with NI 6221 (supported DAQmx) _so I installed NI DAQmx compatibility live.

  I use the unit as DEV1-by default.

  I can't select any channel to browse...

  Please help me

  Please see attachment

  Thanks in advance

  RENN

  If you right-click on the control and select "I/o name of filtering", say the DAQ or DAQmx channel name? If she says no DAQmx and data acquisition, you have a traditional DAQ channel control and you will not get a list of channels available since you actually use DAQmx. I suspect this is just a limitation of compatibility screw and you will need to enter the list of channels manually until you make a clean break and use DAQmx features.