Screw LabVIEW compatibility helps with NI DAQmx device does not

Similar Questions

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Help! WSD Print device does not have a driver

  Help, please! I have a Dell Inspiron N7110 with Windows 7 Home prem oa that I try to install an epson stylus nx420 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  .  Unfortunately, my mother lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I completely rebooted (with assistance from HP Support) the new operating system for laptop to factory settings and still exp the same problems... What should I do?

  Hey Elena,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the exact full error message you get when installing the unit?

  (2) have you installed the driver from the manufacturer's website?

  (3) your computer is capable of detecting other connected USB devices?

  You might face this question when the driver installed is not original or if it is not installed correctly. Follow the troubleshooting methods listed below to solve the problem.

  Method 1: Install the printer drivers from the link below, then check the issue. Select the appropriate operating system.

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=151211&prodoid=63087959&infoType=downloads&platform=all

  Method 2: Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link given below for assistance.

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Feel free to write us if you are still experiencing a problem. We will help you to come.

• HELP - All the USB device does not not - Vista Ultimate

  I have a desktop P4 computer and ran on Vista Ultimate for more than 1 year (window updated constantly). Everything worked smoothly until one night, all my USB devices don't work anymore. Based on the Device Manager, the USB are ok, check my BIOS, everything remains unchanged.

  now, I got tired of reinstalling the same operating system and at the end of the installation, all USB devices do not work.

  Please can someone advise what should I do to recover my devices USB working again.

  It is the motherboard or the operating system has problems?

  Hi Dragon,.

  Follow the instructions below and check whether it is hardware or operating system issue.

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Check whether the problem is resolved.

  If this does not work, you can try to update the chipset drivers and see if the problem is resolved.
  Looking for drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  If the problem persists, contact the manufacturer of your computer to update BIOS that may help you resolve the issue.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also check out the link below.
  Rollup cumulative update for USB in Windows Vista Basic components
  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I need help with copy and paste does not

  I already asked this question, but no one seems to want to help or does not know the answer.  I can't afford to pay microsoft $49 help. It is their dang opertating system and you would think they would help the customers who buy their products.  Don't think!  Please, someone help me.  I am a graphic designer and need to copy and paste all the time, but it does not work.  It's so frustrating.  Should have bought a Mac time... next.  If no one here can help... where can I go for help?  Here the question again.

  Copy and paste the orders have stopped working in all my software programs (Photoshop, CorelDraw, Corel Painter, etc.).  When I type "copy", or "control c", it crashes and whatever program I use becomes inoperative, as well as all my programs, until I can get the specirfic program to close.  I ran Services.msc to ensure than the Clipboard (did not find Clipboard so I assumed it was changed to album) has been activated, which he was, but when I click on 'Start service' it says "cannot start service on local computer album.  "Error: 1068: the dependency service or group could start. It started several weeks ago and I have not installed new programs during this period.  Only my computer display was the automatic updates of Windows.  It's very frustrating... How can I copy and paste to work.  I got this computer less then 4 months.  Thank you

  To all with this problem, try this:

  http://support.Microsoft.com/kb/309662

• help with code of favicon does not

  I can't get my favicon to work here is my current website www.sqtlimited.com

  I had the record for PS and made my favicon 16 x 16 saved as favicon.ico in the same folder as all my other stuff site Web

  not downloaded to the server all in the same place no subfolder.

  Here's my course last line of code is favicon

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > SQUARE Limited < /title >

  < style type = "text/css" media = "screen" >

  @import url ("menu bar - 1.css");

  < / style >

  < script language = "JavaScript1.2" type = "text/javascript" src = "mm_css_menu.js" > < / script >

  < link rel = "shortcut icon" href = "' / favicon.ico" type = "image/x-icon" / > "

  < / head >

  What works on my site is

  I have not a / at the end and my ico file is located in the root with the index.htm file

  Yes, you must sometimes do a 'reload' or clear history of cache for the changes to appear

• Help with my css style does not display does not correctly.

  Hi all

  Anyone can shed some light on my site for me. Ive introduced my homepage to www.dor-dropz.com/index3.html. Everything seemed to work fine until I added a footer. Basically the footer shows about 1/4 of the way up from the bottom of the page behind some of my content. Of course, this is not correct and I can't understand why. Ive got my happy wrapper, but it doesn't seem to be wraping around the last section of my webpage so far. If you someone would care to take a look for me and let me know where im going wrong, it would be much appreciated.

  Oh - sorry.  Add this style to the rule for #homepage - home - content - container - overflow: hidden;

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Equium P300-16 t - Synaptics Pointing Device does not work correctly

  I hope someone can help.

  Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

  Looking forward to any help you can give.

  Suggest that you reinstall simply touch pad drivers. Maybe new version?
  So, just uninstall drivers, restart your computer, reinstall the drivers.

  Drivers are located on the download page of European drivers.

• SD-R2312 device does not appear in the hardware Manager

  I have several problems with my Toshiba SD-R2312 Windows XP. Cannot open CD, device does not appear in the hardware Manager, drive is not displayed anywhere.

  First time it happened, I was able to reactivate it as described here.
  http://www.TechSpot.com/VB/all/Windows/t-28912-desperation-Toshiba-DVDROM-malfunction-possible-missing-driver.html

  After working for a few weeks, the drive is 'gone' once again, same symptoms as the first time.
  Try the registry fix again, I found that there are still "UpperFilters" (which I've deleted again), but not Lowerfilters.
  However, which did not help this time.

  I have no "unknown" devices that I could delete (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6548&messageID=22638).

  Does anyone have an idea how to get the drive working again? Is there a way to prevent that from happening again?

  Thanks in advance.

  Hello

  If the drive is not displayed in Windows Explorer, perhaps this method can help. Try it!

• Satellite U400-17R - audio device does not work after installing XP

  Hello

  I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

  Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

  I'm lost... Can someone please help?

  Hello

  I think you have the same problem like me a few months ago.
  I installed Win XP SP2

  The t is not his work because I didn't install the patches MS; KB835221 & KB888111

  The patches must be installed as a first step, before the audio driver is installed.
  If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

  PS: The MS patches are part of the SP3

• 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

  6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

  I've done a new install and reset the network settings.

  But always the same questions

  Thanks a lot for your help

  I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

  Device: iPhone 5 s

  Problems:

  -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

  -Sometimes device reacts very slowly on the command (or even then restarts)

  -For the most part within the first hour when used, sometimes immediately (after restart)

  -Cannot slide or apps to react when I touch

  -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

  Resolution of problems so far:

  -Reset all settings (no result)

  -Backup on iTunes (11 dec)

  -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

  -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

  -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

  -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

  Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

  By the way: I guess that not possible to restore 9.1 on the device.

  The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

  So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

  *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

  backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

  I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

• dose of the device does not react to the C++ code

  Hello.

  I have meassuring keithley 237 system, connected to the port COM4.

  And I commands manual keithley insturment.

  When I use assistant LabView Instrument IO and put in "query and analyze" the steps of these commands, the device reacts as it should.

  But when I try to write and run my own C++ code, device does not react.

  just no reaction at all!

  Maybe someone can help me and tell me what's missing.

  Here's my C++ code:

  #include #include "visa.h"
  
  using namespace std;int main (int argc, char *argv[]){       ViStatus status;    ViSession defaultRM, instr;    /* Open Default RM */    status = viOpenDefaultRM(&defaultRM);
  
      if (status != VI_SUCCESS) {        /* Error Initializing VISA...exiting */             return -1;        }
  
      /* Access other resources */    status = viOpen(defaultRM, "ASRL4::INSTR", VI_NULL, VI_NULL, &instr);
  
      // here I send commands to device    viPrintf(defaultRM, "F1,0X");           //  "F1,0X" and all another symbols in "" are just commands from keithley manual.          viPrintf(defaultRM, "B1E-6,0,X");    viPrintf(defaultRM, "L11,0X");    viPrintf(defaultRM, "P3X");    viPrintf(defaultRM, "O0X");    viPrintf(defaultRM, "N1X");    viPrintf(defaultRM, "H0X");
  
      viClose(instr);    viClose(defaultRM);
  
  return 0;}
  

  Hello

  There is an obvious problem in your code: viPrintf () accepts as a first parameter a session handle, which is "instr" variable returned by viOpen () in your case. Using the default resource manager leads to incorrect results (BTW, you must add to your code an error checking: I expect viPrintf () to return VI_ERROR_INV_OBJECT or similar error).

  As long as an additional indicator, I noticed that you use no termination for your messages: you should check in the documentation for the device if you need to add a stop character (the instruments most want a '\r' or '\r\n' sequence at the end of the messages to accept).