Helps the open WIFI network connection

Similar Questions

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected.

  Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected. Is there a way to get to show him that I am connected?

  original title: my computer says that I am not connected to the internet when I am.

  Another solution: Red connection system icon even though I am connected... X

  "Try this. It worked for me.

  I finally removed my network security and the State of the network now shows me as connected. The Red Cross has disappeared. It seems that Windows 7 does not support WPA2-PSK. I can't imagine that's the case. Any ideas as to why, as it is installed on my PC, is an option for WPA2-PSK? As I said, the material is supported and worked with XP. »

  ...

  And another... where the problem was related to the third-party software:

  "I found a solution. I had recently updated my GOAL to the latest version and it is incompatible with the new vista. It seems to be a small bug in the operating system. How I solved it is uninstall AIM and the other program "Viewfinder" or something like that...
  After that I uninstalled both of these programs, the Red Cross had disappeared and I had no network problem either. I now use trillian and I have no problem. I hope this helps! »

• Photosmart 7510: Access to the separate wifi network printer

  I have 2 wifi networks, for the expansion of the range in my house; We built my router (Fios) fios and others (Asus) connected to the same router via ethernet.  My printer is connected to the wifi Fios network.  When I'm at the back of the House, I connect my laptop to the Asus wifi network but am unable to connect to the printer.  Is there a way to make the printer visible on both networks?

  Hi @lsrothstein,

  Welcome to the HP Forums!

  I see you're wondering if you can access the printer HP Photosmart 7510 of several networks at once. I'm happy to answer that question for you!

  The printer is designed to work only on wireless at the same time. So to be able to print to the printer, the cell phone/mobile device must be connected to the same wireless network to which the printer is connected to. think of it as an invisible cable from the computer to the router, to the printer.

  This website, HP Wireless Printing Center - basics wireless, goes into great detail, if you are interested.

  Hope that answers your question and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Get rid of the current wireless network connection so that I can set up a new connection using the same IP address.

  Here's my problem: I got a new computer and a wireless network connection has been set up and I could get on the internet. My daughter then wanted to try her new computer and somehow his computer is defined as the network and I can no longer connect to the internet via my computer.

  The second part of my problem is that when I try to configure my computer, I get the message that I need to go to the Micro knowledge base and article 871122.
  I did it.  By following the instructions for Windows configure my wireless, I get as far as the stage of network connections - go to change the settings for this network connection.  It is said that I had to go to the wireless network tab.  There is no tab wireless network I can say to use Windows to configure my network connections...

  I know it is long, but can someone help.  I use Windows XP Prof 2002 with service pack 3 version. Thank you adpotate

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't get the wireless connection appears on the list__ of 'network connections '.

  Only, I had to reformat my Latitude D31 and don't know how to do the wireless network connection appears on the list of network connections.  The without line is turned on and the router works.

  On a relative (sort of) topic, before reformat, I got a blue screen that says since more memory was used that was installed, there was no memory for something else.  The computer is running (I reinstalled Windows XP, but in Setup the message still arrives.  Is this normal?

  Hello

  Old laptops use to come with very little memory.  Since then, software exceed the amount of memory installed

  Check the amount of memory you have and see if you can upgrade.

  You can find and expanded manual on Dell' support for the laptop.

  Regarding the wireless.

  It is possible that the wireless card is not operational and need to reinstall drivers.

  Maybe this can help.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  -Jack MVP-networking. EZLAN.NET

• How can I remove the Administrative Tools, network connections, printers & Fax and scanners and cameras my desktop icons?

  Recently, I installed a trial version of Tune Up Utilities 2009. During one of the scans/tune-ups, he gave me the option to display the Administrative Tools, network connections, printers & Fax and Scanners & cameras icons on my desktop. I checked ok, however, now, I think it's too crowded in my office and you want to remove them... right on the desktop, not everywhere else they are located. I tried everything I know to remove them without success. Anyone knows where is the menu option to display on the desktop so I can uncheck or choose Delete? I don't want to have to change all the .ini files or .bat to because I'm afraid I don't do it correctly and create other problems.

  Hello tellis1230

  I don't know what you have tried, but have a look here

  Right-click Desktop-desktop/properties/Office/Customization

  Uncheck what you don't want

  .

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• help of virus shutsdown network connection all the connected directly to computers...

  I downloaded a few hdd cloning software called xxclone and has been infected with a virus of average. In my opinion, he got in registry files and free deeply rooted in the system. I tried rootrepeal, mbam, avg and the restoration of the system that nothing did. the symptoms are the network cable is plugged all directly connected computers on my home network are cut off from the internet. When I unplug the cable to the infected computer all directly connected computers can connect to the web without problem. When the infected computer is connected I have wifi but no other access. my computer works fine accept it won't log on to internet. I tried to uninstall and reinstall the network drivers and the recovery of the system did not. I'm really at a loss any help would be greatly appreciated

  I recommend taking a call from Vincenzo Di Russo: How to get rid of malware

• How to connect to 2 wifi hotspots by using the 2 wireless network connection (wifi virtual Miniport Adapter) Using Windows 7?

  the main wifi adapter is connected to a Wifi hotspot
  I want to use the wifi virtual Miniport Adapter available in windows 7 to connect to another wireless connection at the same time, is this possible and how?
  Thank you.

  Hi Grafx1,

  Virtual WiFi cards are commonly used for things like virtual machines or VPN connections and are not the real wireless cards.
  To connect to 2 wireless networks, you need 2 physical wireless adapters.
  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I accidentally deleted the setting wireless network connection icon, please help the change adapter

  I have Toshiba satellite A 505 S6989

  I accidentally deleted "Wireless Network Connection" icon of "changing the adapter setting" (network & sharing Center) while she was to allow...

  I have driver installed several times but he forces back...
  Also checked... but under the network adapter, Device Manager is showing only realtek ethernet... no wifi

  Please tell us how to get back this icon so that I can connect via wifi...

  Please answer as soon as possible
  concerning
  Afonso

  I solved the problem a few days before, sorry for the late response...

  WiFi card was detached from this place (it was a hardware issue)

  I opened my laptop and re placed this wifi card.

  now it works fine

  Thank you

• TCP/udp connection via the private wifi network

  I want to develop applications using the wireless private network with tcp/udp connection for my Blackberry 8320 (Version 4.2.2.180 without SIM), do I need authorisation from RIM so that they work in the unit? If it is true, how can I get permission?

  I noticed http://www.blackberryforums.com/wifi-hotzone/100800-8320-wi-fi-limited.html

  who says:

  "The Blackberry 8320 with wi - fi connection is limited. The only program that can use the wi - fi is the Blackberry browser... all the third-party programs... ie. Opera Mini, JiveTalk and even RIM's instant messaging programs. Yahoo Messenger, Windows Live Messenger, are all designed to connect using data from EDGE of the phone... None of them can detect or use the wi - fi! »

  If it is true now?

  You can use the interface = wifi parameter in the URL to specify that the connection should be performed by Wi - Fi.  However, please note that this setting is available in version 4.5.0 and highest BlackBerry device software.  Therefore, you must first put your BlackBerry handheld.  FURTER details can be found here:

  What - in different ways to establish an HTTP connection or socket
  Article number: DB-00396

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

• Windows Vista continues to try to connect to the VirtualProfile in network connections.

  I was helping my brother set up its new Netgear Wireless USB adapter in Windows Vista and kept running into the same problem.  Once the adapter has been installed, Vista would continue to try to connect to a VirtualProfile under network connections which would interfere with the connection of the profile.  I had my brother take the VirtualProfile and then it connected correctly.  However, after each reboot, the connection of VirtualProfile appears every time and we need to start over the process.  A way to remove this VirtualProfile permanently and why what is happening?  Thanks for any input.

  original title: Wireless Virtual Network profile

  Hello Flash4,

  Thank you for choosing Microsoft answers forum for Windows Vista.

  I suggest you go to your network card making and download / install the latest drivers.

  Also I suggest that you check your system for corrupted files. You use the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:

  1. open an elevated command prompt.

  2. to do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  3. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this information is useful.

  Thank you.