TCP/udp connection via the private wifi network

Similar Questions

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Send the datagram via private WiFi network problem

  I'm confused with the sending of datagrams through the private wifi network!

  There are four examples of url to send the datagram in the sample RIMJUDPClient.java

  UDP://10.1.0.122:5029;19780/rim.NET.GPRS
  UDP://127.0.0.1:5029;19780/rim.NET.GPRS: use the Local testing this string
  UDP: / / < public IP >: < Port UDP >; 19780/proxy: use this String with AT & T Service GPRS
  UDP: / / < public IP >: < Port>;19780/internet3.voicestream.com UDP: use this string with T - Mobile GPRS Service

  However, I would like to send the datagram through the private wifi network and find an example url for non-GPRS network in "Development Guide:

  For example, the address for a connection of CDMA network would be udp://121.0.0.0:2332; 6343.

  So I tried the url ' udp://iport1; port2 /; interface = wifi", but it does not work in the 8320 (v4.2.2.180) device. the send() throw Exception content 'null '.

  My udp support private wifi network connection.

  My url is correct? Can you show me an example url used to create the connection for the private wifi network?

  Appreciate for any help!

  UI = wifi parameter has been added in version 4.5.0 of BlackBerry API set.  You will need to upgrade your BlackBerry device software in order to to use.  Please see the web site of your operator for an upgrade.

• UDP connection via wifi in the name of 8320 tunnel met IOException:Invalid

  I am new to Java, trying to open a UDP connection on wifi in my BB8320 (V4.2.2.180).

  I have connected to my 8320 to a WiFi network and that you can access Web page in the browser (configuration: Wi - Fi browser).

  I tried with: Connector.open (DatagramConnection) (datagram://192.168.1.101:5009) and Connector.open (DatagramConnection) (udp://192.168.1.101:5009), but all got IOException:Invalid name of the tunnel.)

  Here's my Mobile Network Options in the camera: Data Services - on; Connection preference - Wi - Fi only.

  The same code works fine in the emulator, tested in a wired network.

  I googled this IOException, it seems that the TCP APN cannot be null, I tried with blackberry.net cmnet, wap.voicestream.com and even the name of the Wi - Fi connection, everyone met time-out problem.

  I have some questions below:

  1. is there any configuration that I missed?

  2. the UDP connection via wifi check the AFN? The APN configured in the emulator is null.

  3. do UDP and TCP connection API need permission in the device?

  Appreciate for any suggestions!

  Sam

  I did in the past, and IIRC the trick was to add: «;» interface = wifi; deviceside = true"to your connection string. for example:

  Connector.Open ("udp://192.168.1.101:5009; interface = wifi; deviceside = true ")"

• Helps the open WIFI network connection

  Hello

  I have a new dash of Sony that I connect to my wifi to work. The network itself is open, however once your device is connected to WIFI, once you open a browser window on your computer/Tablet/phone is where it asks you your work credentials (name of user/pass). Once you submit you can go anywhere. I've seen this at other places with band wifi open, but you must accept the terms and conditions of the first time you open a browser window. Does anyone know how after you connect to the wifi network I would be able to enter my credentials on the dashboard? Since it is not exactly a web browser I know.

  Thank you!

  Hello

  Credentials of the user to connect to the Wi - Fi network can be entered into the dash unit.

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• Photosmart 7510: Access to the separate wifi network printer

  I have 2 wifi networks, for the expansion of the range in my house; We built my router (Fios) fios and others (Asus) connected to the same router via ethernet.  My printer is connected to the wifi Fios network.  When I'm at the back of the House, I connect my laptop to the Asus wifi network but am unable to connect to the printer.  Is there a way to make the printer visible on both networks?

  Hi @lsrothstein,

  Welcome to the HP Forums!

  I see you're wondering if you can access the printer HP Photosmart 7510 of several networks at once. I'm happy to answer that question for you!

  The printer is designed to work only on wireless at the same time. So to be able to print to the printer, the cell phone/mobile device must be connected to the same wireless network to which the printer is connected to. think of it as an invisible cable from the computer to the router, to the printer.

  This website, HP Wireless Printing Center - basics wireless, goes into great detail, if you are interested.

  Hope that answers your question and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Unable to connect to the virtual wifi

  Hello

  I can not connect to the virtual wifi via android. on my old laptop with windows 7, it works the same way.
  I created it with commands cmd:
  command netsh wlan set hostednetwork mode = allow ssid = "MySSID" key = "Mykey" keyUsage = persistent
  netsh wlan start hostednetwork
  in the connected connections sound also displayed with internet, but when I try to connect with my GNex, his only tries to connect, but cannot...
  I have the Qualcomm Atheros AR8161 PCI - E Gigabit Ethernet Controller (NDIS 6.30) for Ethernet and wifi: Broadcom 802.11n
  OS: Windows 8 Pro
  You need more info?
  Thank you

  Hi Mike,.

  Try the following steps:

  a. click on properties of your data card (if you use it) connection.

  b. click the 5th tab "sharing".

  c. check box on all the options there.

  d. and reactivate your virtual network via the following command: -.
  
  netsh wlan hostednetwork stop
  netsh wlan start hostednetwork

• Satellite M100-221: unable to connect to the home WiFi AP

  Unable to connect to the home WiFi AP. Impossible to establish connection (when using intel software Bundle, connection hangs on the authentication step.
  When using the connection and windows engine, it connects 3 times will come down on "acquiring network address").

  I downloaded and installed the latest drivers and updates to the BIOS, but it does not solve the problem. Other computers with equivalent settings to connect without any problems.
  Wireless AP DLINK 1000AP + type b Wi - Fi.

  What is the problem?

  Hello

  When I have this kind of problems, sometimes by turning and the AP help.
  Or try to change the authentication or encryption settings.

  Good bye

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• Connecting to the wrong wireless network.

  Nope.  Tried to make this process a few times just to make sure that I was just doing and still it connects to the wrong network.  Something else I could try?

  I'm in the boat the same, did you ever get a resolution on this?

  Separated from the<>https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connecting-to-the-wrong-wireless-network/633fcfd6-7bdd-4369-b66f-94611c5df76e >

  Here are some solutions to try if you can't connect to Wi - Fi. Follow the below mentioned steps to solve the problem:
  1 remove the network and let Windows re - find. Then enter the password again.
  http://Windows.Microsoft.com/en-in/Windows-8/get-online-tutorial
  2. change the TCP/IP settings, if the IP address is set to manual
  http://Windows.Microsoft.com/en-in/Windows/change-TCP-IP-settings#1TC=Windows-7
  3. If none of the above steps work, follow the link to solve the problem below:
  http://Windows.Microsoft.com/en-in/Windows/cant-connect-to-network#1TC=Windows-8