Hénon map

Similar Questions

• Problem of volumes the reallocation

  We are relatively new for ESX.  We have a Nextra XIV subsystem connected to an ESX3.0 system thanks to an HBA adapter, which works fine, until we have done the following:

  -Mapped a volume to the ESX using a utility XIV.

  -Using a Virtual Center client, selected the ESX Storage/Configuration/system adapters / & lt; vmbha.x.x & gt; / Rescan.  The volume appeared with success.

  -Selected a virtual machine under ESX system and added a hard drive by using Edit Settings/Add/Hard Disk/Raw Device Mappings

  -Choose the Windows operating system in the virtual machine and made a new analysis under disk management

  So far so good.  Everything seemed fine.  Then we did the following:

  -Non mapped the volume using the XIV and remapped another volume with a different capacity at the same location.

  -Reread the ESX using VC system.

  -Looking at the managed object provides information about the ESX, it seems that ESX recognizes the change in the capacity of the volume, but not the name.  The name remained the name of the previous volume.

  -Then, we restarted the ESX, to see if that could clear up.

  -L'ESX is rebooted, but the virtual machine would not come up--gave an error "file not found".  We noticed 2 thugs 0-ability of the virtual disks in the list of the VM in VC, so we removed the.

  -Virtual machine now come with success.

  Any clues why the ESX did not see the new volume name, and what we can do to remedy this scenario?

  Experiences or tips would be very useful - thanks in advance.

  Not mapped the volume using the XIV and remapped another volume with a different capacity at the same location.

  Okay, I don't know this system, but using a 3rd third party tool (even if it's your SAN vendor) is not a good idea to make underlying changes to the file system.  This step is probably where the trouble started.  Why not map to its original location?

  If you try to move files to do it between VMFS not in terms of SAN.  I think that is where you should start.

  For future reference you should area your readers and just change the ESX hosts have access to different file system of mapped drives.  Because ESX once, it designates a VMFS volume he wrote a signature, in my understanding of your changed the ID of the disc where the VMFS is kept which is why I think it's broken.

• Strom - how to capture the character alphabetical non-base [keypad.map (keycode)]

  Hello

  In our application, we have a search screen. His works well when we enter alphabetic characters (the keyboard multitap strom).

  Problem is when we type some non alphabetic characters on the device (e.g. $, % &) it isn't research.

  In the keyDown() method, we get the key as

  key tank = Keypad.map (keycode);

  The code above was not capturing the symbols and other characters not alphabetic. its return null value (/ u000).

  Is there any way to solve this problem.

  Insted of Keypad.map (keycode); It is another method to get all the characters.

  Thank you

  MINDUS

  Problem solved by using metod keyUp()

• Vista Home creates removable at startup drives when none exist and will not work my mapped drive

  Hello

  I'm trying to fix and the problem I am having with my Vista Home.  I got this machine running for two years with the same program that requires a G: drive.

  All of a sudden when I start the machine there are some removable drives created (F, I, M) and my G drive has a big X on this subject.  I create my G drive with a .bat file and when it is run, it says Invalid G drive.

  I can get my G working disk by clicking on one of the removable drives and choose safely remove.  After that I can click on my drive and it comes back.

  Anyone has any idea why it is?  And what I do about it?

  Any help would be greatly appreciated.

  Thank you

  JRCPDXOR

  Hi JRCPDXOR,

  There is a possibility that this computer can contain some infections malware or virus causing the abduction drives created at startup.
  First of all, I would say that you remove the external hard drive from the computer and then scan the computer for any infection and remove.

  How to get rid of malware or viruses
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  After the scan log drive G and check.

  Go back with the results!
  
  A red 'X' appears in the icon for a mapped in Windows Vista, network drive, even if you access the drive successfully
  http://support.Microsoft.com/kb/938062

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Good HDMI cable (non - MHL) map U2415 "HDMI (MHL)"?

  So, I U2415 on the way, as well as a cheap temporary video card with HDMI but no claim of MHL. To simply use an HDMI cable or a cable MHL support? If a cable can now support regular HDMI and HDMI (MHL) on the road then I suppose I should get this one.

  Thank you, Drew

  You must contact the manufacturer of any device that can connect via HDMI, MHL to find out which cable they recommend for their device.

• When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?

  When I click on an image or map that is Kijiji real estate pages, open Firefox all crunched on the right side of the page. How can I fix this?
  For example, I discovered an apartment ad that has various attached photos. It said click on the images to see an enlarged version. FF opens the page however the majority of the page is white and the image seems to be pushed on the right side of the page and watch as if it were bundled up against the right side shows is not the whole picture.
  What can I do to fix this?

  Thanks Cor - el,
  Just set the police minimum votes to zero, did the trick. However, I also appreciate other suggestions that I'm following now. Non-strabisme already installed. A little more difficult to find this file user.js. It any suggestions?
  Thanks again for your great help.
  See you soon,.
  Robert

• Drive mapping shared with VPN access

  I'm the only person in our company (small) with a Mac and I work remotely. I consulted my company using Network Connect VPN successfully.

  I'm now trying to map the shared drive.

  Under "OK" > "Connect to Server" I entered the address of the server ("smb: / /...") (' etc.) because it has been given to me. When I click on connect I get an error "there was a problem connecting to the server '[server address]'. The server may not exist or it is not available at this time. Check the server name or IP address, check your network connection and then try again. »

  I tried a number of variations of the server address - none worked.

  In the Finder, under the heading "Shared Disks", all I can see is an empty folder "servers".

  When I'm on wifi office internal society, we were able to map the drive. But nothing has worked so far not remotely, remotely.

  Can anyone suggest a solution?

  I solved my problem. I needed to use the IP address of the server, not the full smb: / / URL etc.

• Non-visible text of contacts in Outlook

  Hello
  I suffer from the same issue that I found posted anywhere on the internet this morning - my Contacts list is illegible because the text is barely visible, as if the map is too small for the space allowed.

  I have:
  My cache of dumping
  Played with the zoom and CTRL - sets all the text to view, but at this time, it is too small to read.
  Checked the section tools/options/content - minimum size fonts the value 'none', web sites set their own sizes.
  All my browsers / add ons etc are up to date
  It looks fine in IE, but I don't use IE

  What else is there?

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• 13 "Macbook Pro retina heats up on the bridge and google maps satellite

  Hello!

  I have a 13 "Macbook Pro retina

  I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

  Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

  I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

  Thank you!

  Hello there, villovsky.

  Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

  Reset the management system (SCM) controller on your Mac.

  Before resetting the SMC

  Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

  1. Press Command-Option-ESC to force stop any application that is not responding.
  2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by selecting restart from the Apple menu.
  4. Stop your Mac by choosing stop from the Apple menu.
  5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

  If you are using a Mac laptop, which is the power or battery issues:

  1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
  2. Stop your Mac.
  3. Remove and reinsert the battery, if it is removable battery.
  4. Restart your Mac.

  If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

  

  Indicators that need to be reset your SMC

  After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
  • The backlight on the keyboard not behave correctly on Macs with this feature.
  • The led State (SIL) not behave correctly on Macs with this feature.
  • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
  • The computer does not respond to the when you press the power button.
  • Mac laptop does not properly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • Battery does not charge properly.
  • The MagSafe LED power adapter does not have the correct activity.
  • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
  • Application icons can bounce on the dock for a while when opened.
  • Applications may not work correctly, or they may stop responding after the opening.
  • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  

  Reset the SMC on Mac Laptops

  First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

  If the battery is good behaviour

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  If the battery is removable

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Thank you for being a part of the communities of Apple Support.

  Kind regards.

• When you use google maps, the text is tiny. How can I fix?

  Google maps text is tiny (mouse type, illegible). This is a recent phenomenon, last 2 weeks and throughout the site. Tried to adjust the size of the text in Firefox preferences and None also set minimum font size. Nothing helps. Everything appears correctly when I use Safari. My OS x version 10.5.8 software is

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• In the non - HP Desktop HP graphics card?

  Recently we bought a NVIDIA Quadro NVS 450 for a Dell Optiplex 960, but when we got it, we discovered that it was manufactured by HP and had a warning label on the package "For use in systems HP ONLY." Does this mean that the guarantee will be simply cancelled using a system not HP, but should still work, or that the card does not work in a system not HP?

  It was also noted that the same card is manufactured by other brands such as PNY. Are there differences between this map and the same card from another manufacturer that would cause the card to operate in some systems?

  It's the card in question:

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06c/A10-51210-64268-348724-64268-3794266-3794267-3861776.h...

  If the card has been delivered with a PC, it would have a warranty 1 year. If bought separately later warranty is 1 year.

  HP always has its own specifications for many PC products, even if there is the same similar components sold at the counter. Sometimes HP requires the card to work with a smaller power, but then performance may be less.

  Get HP to guarantee in writing that the card will be guaranteed in non - HP computers can be difficult. However, the card should work.

• None of my graphics cards work, not even in safe legacy!

  As the title suggests, none of my graphics cards work for my pavilion p7 - 1597c. The only way I can see my screen is when I have no graphics card in probably due to the fact of secure boot. It does not work even with this option disabled. So, I must also have a slot pciex16 security disabled to make it work, but now I can not detect any of my maps I have. I have disabled the start safe and active start inherited countless times with a bunch of different options without success. Having to remove my countless of times graphics cards is very annoying so I can reset the settings and try the different settings. Maybe theres something wrong with the bios? But I don't know, I'm just really mad that I can't play my games in my library of steam because of this.

  Here is the article I've tried: http://support.hp.com/us-en/document/c03653226

  Used graphics cards:

  MSI AMD RADEON 7730 1GD5

  AMD SAPHIRE 7770 1GD5

  NVIDIA GTX 660 1GD3

  Well I fixed, so for all models of p7 - 1597c, you must have the legacy mode and you must also have enabled pciex16 to secure, but it also disables the use of your other two dvi ports. This case is now closed.

• Install a non-hdmi video card and it always disabled audio...

  Hello
  
  The title pretty much everything said, but the story is that after the discussion on this thread: http://h30434.www3.hp.com/t5/Desktop-Hardware/ATI-HD-5770-in-a-DC5800-Workstation/m-p/366471
  
  ... I have installed the Sapphire 5570 of non-hdmi card that seemed to be the best map of low power no hdmi.
  
  The card works fine, in fact (with another 2 GB of RAM), it took my WEI of 3.1 to 5.9 on Win 7 (0, 1 - 7.9).
  
  The problem is that it seems to be invalid audio. The audio device only applies for the registration is a device audio hdmi that is to say works well, but nothing out of the headphone jack.
  
  The system is a comprehensive form of dc5800.
  
  Someone has ideas on how do I troubleshoot/get around that?
  
  If this isn't the case, I would be able to put a cheap card audio in my slot remaining a (who is part of the background?) and if so, what is this location? It is not clear the product PDF.
  
  Thank you very much...

  Hello

  Have you tried the reactivation of its edge in your bios menu?  Don't forget to save changes if you need to re - activate.

  Best wishes

  DP - K

• Power PC Apps is no longer supported - TOPO maps

  I installed an old maps geographical national app, the old version to my iMac.  He opened and I could upgrade to the latest version via the NG site and who opened, but now when I try to open it, I get the error message: "Cannot open the application"TOPO"because the PowerPC applications are no longer supported."  What can I do to work around this problem?  I'm working on OS X El Capitan with an iMac Retinat 5 k.

  Thank you

  None

• Maps di IOS 9.1

  Buongiorno,

  nella App maps iPhone IOS 9.1 di quando if crea an itinerario non è fruit di evitare the strade con pedaggi.

  E' possibile makes maps di IOS 9.1 adding questa fruit, senza andare alla ricerca di una altra App download?

  Inoltre an altra cosa e che useful if potesse utilizzare maps anche senza avere indispensabilmente outdo WI - FI 4G (cioè come maps online) since quando o this trova e Estero not if Può usare internet by I costi delle company telefoniche e notevoli a problema serio.

  Spero di esservi useful stato per questa App makes.

  Grazie. Saluti.

  Antonio Matese

  Apple no it e that. Devi warden qua:

  www.Apple.com/Feedback