Hi all, someone could please describe how to use partition recovery and recovery disks

Similar Questions

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• How to use the recovery disk

  original title: firefox doesn't work all the time and other programs and how do you RIF until recovery D

  Thanks hope someone can help

  Recovery of Partitions and recovery disks are created by the manufacturer - they are not Microsoft.  We have no information about their configuration or their operation or anything.  Each manufacturer is different (and sometimes even each make or model).  There may be a keyboard command that you run during startup to speed up the process, but I have no idea what this command can be.  You must contact the manufacturer for instructions and assistance.

  If you explain the problem more in detail, we may be able to help you fix the system without such a drastic measure; However, if you choose a clean installation is the right solution (don't forget to backup your data that this process will wipe the drive first), then it should solve all problems you encounter, unless they are hardware problems (but you know that soon enough if it does not work).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite M300 - how to use the recovery disk creator?

  Satellite M300

  How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

  Hello

  I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

  However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

  For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

• Re: Tecra A4 - how to use partition recovery to recover the XP

  I recently bought a laptop Tecra A4.
  Everything was going well until I decided to install windows Vista on it.
  It has become too slow.
  I would like to reinstall the XP that comes with it.

  There is a partition recovery of HARD drive here, but im not a very experienced user I don't know how to proceed.
  I read the user guide on the HARD drive recovery utility, but by pressing 0 at startup did not help.

  Any help would be extremely aprecciated.

  Hello

  Stand by. What recovery on the HARD drive partition do you mean exactly?
  As far as I know Vista has formatted the whole HARD drive and created two partitions; one for the system (partition C) and the second partition for the restoration of the system are hidden (not visible).

  I guess you must restore the supplied XP from the recovery CD Toshiba operating system if you want to install the XP again.
  In my opinion, it's the fact and the quickest way to get back the XP on the laptop ;)

  Best regards

• How to use the recovery disks that I created?

  Original discs of title: recovery

  The computer store fixed my virus but when I come back most of my programs computer had disappeared. I did (as recommended) recovery disks when I came to the computer. How can I re - install what is on the recovery discs?

  Hi B.Frizzen,
   
  You can use the recovery disc for re - install or repair the operating system. It will not contain the programs you use on the computer.
   
  If you have a backup of the programs you use, then you can restore the same thing now, unfortunately you may need to download and reinstall the applications again.

• Compaq Cq61. Windows 7. How to use 3 recovery disks?

  When I bought, I made 3 as recommended HP recovery disks. Now, I want to use them, but can't see how. I tried to start with #1 load - no joy. I also tried the option Start button/F11 on UTube. That no longer works.

  I read earlier Q and has but none seem good enough to me. Any advice would be welcome.

  Thank you.

  Hello:

  Have disk 1 in the PC and turn on the PC. From the beginning of the HP welcome screen, press the F9 key to start the start time menu.  Select the DVD player.  Press the return key.

  If the drive is good, you will see a message on your screen that says in essence... Attempt to boot from DVD... Press a key to boot from the DVD...

  Press a key and the recovery disk should start working.

  Then simply follow the instructions on the screen.

  If that does not work, then you probably have a few bad discs and you will need to order a series of HP.

  Or if you can read the product key of MS of W7 of 25 characters on the bottom of your PC, you can make your own regular installation of W7 media.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction.  Thank you very muc

  I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction, I would really appreciate it!

  Normally, I shoot with the 7dmarki and have never had any problems.  After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall.  First train to the plugin to update because it was a leased device.  Thanks again!

  Thanks MichelBParis!  I didn't see where he said to 12 items.  I downloaded the free DNG Converter last night and not had much luck.  It is not recognizing that I have all files in the folder at all.  Don't know what I'm doing wrong!

• How to use the recovery on Satellite A215-S7422 DVDs

  Hello

  I have A215-S7422
  First of all, I like the Vista Home Premium, until I had a few problems with my operating system.

  I'm downgrading my laptop for Windows XP SP2 home edition.
  I formatted all the HARD drive, to make a few partitions.
  A few weeks later I tried to Vista using the DVD recovery system which is included in the package when I bought the camera.
  Unfortunately, the DVD without being detected in the first over.

  Do you have any idea how to use this recovery DVD?
  It is any special program to activate the recovery DVDs?

  Please, help me.

  May I ask why create you double assignments?
  You already asked this here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=140003

  Secondly, as already described in different threads, you have to boot from the recovery DVD and this will begin the new installation image.

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use product recovery CD-rom?

  How to use product recovery cd-rom on the satellite A40 range?

  Hi Daniel,.

  To use the recovery CD, simply insert the first CD (assuming there are two) in the CD drive and then just turn on your laptop while pressing the 'C' key on the keyboard. This will cause the laptop to load a minimal operating system on the CD that will start the process of recovery of the product.

  You should also be an initial menu that asks you if you want to do a complete system restore or restore 'Expert'. The full restore will delete all of your 'C' drive and will then install the entire system (excluding all the extras you'll have to install afterwards). The recovery of 'Expert' will allow you to partition your hard drive before you install the operating system in the C"" drive.

  Kind regards