How to use the recovery disk

Similar Questions

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• Satellite M300 - how to use the recovery disk creator?

  Satellite M300

  How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

  Hello

  I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

  However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

  For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

• How to use the recovery disks that I created?

  Original discs of title: recovery

  The computer store fixed my virus but when I come back most of my programs computer had disappeared. I did (as recommended) recovery disks when I came to the computer. How can I re - install what is on the recovery discs?

  Hi B.Frizzen,
   
  You can use the recovery disc for re - install or repair the operating system. It will not contain the programs you use on the computer.
   
  If you have a backup of the programs you use, then you can restore the same thing now, unfortunately you may need to download and reinstall the applications again.

• Desktop HP pavilion s5-1540: using the recovery disk

  I have the recovery disc I made when I got this pc.

  Now, I need to use.  I started the pc with the disc, but nothing happened.

  Can I get advice on how to use the recovery disk?

  Note.  I'm not very computer savy.

  I sent my pc in for repair to a place of repair no HP (insurance).  They have installed a generic operating system but there is no program file.  I want my pc as it was when I got it.

  I can't get these disks to run.

  any help is much ajppreciated.

  Insert the recovery disk 1 in the drive, restart the PC, when you see the HP logo screen start to type F9 on the keyboard, this should load the Boot Manager, and then highlight (using up/down keys) internal CD-ROM drive cd/dvd and press ENTER, it will now boot from the recovery disc 1 and we hope to start the restore process.

  It is a long process not to disturb the tactile keys or pc, while he recovers, it will reboot several times on his own, you know when it is done when it asks you to set up the pc for first time use.

  Make sure that the recovery discs are clean before you start.

• How do you reinstall to factory settings using the recovery disk

  Hi, I created the set of recovery disks. Can you please guide me how to reinstall to factory settings using the recovery disk.
  Thank you

  Put the first disc in the CD/DVD drive.
  Turn on the device, press F12, choose ODD as device boot and boot from the CD/DVD drive containing the recovery disc.
  Follow the instructions on the screen.

• Re: How to get Corel WinDVD without using the recovery disk?

  The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

  Updates for the Bluetooth and wifi are also pretty messy.
  Is isn´t possible to get this software back without using the recovery disk?

  As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

  All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
  This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

  If you don't like it, you can remove the system and use your own applications.

  Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

  If you have any other questions do not hesitate to ask.

• How to recover files before using the recovery disk?

  Hello

  I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

  Hello

  In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

  An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• How to use the recovery DVDs

  Hello, my Windows 7 strange includes software and I want to re - install the c with the recovery of two DVD partition, I did with the Toshiba utility but I can't make it work. Someone want to help me?

  So I had two partitions on my hard drive and I want to reinstall the c with the recovery of two DVD partition but don't know how.

  bartski

  Bartski salvation,

  > but I can't make it work
  And does that mean exactly? You get an error message if you use recovery disks or if you are not able to boot from them?

  Use the recovery disks is very simple: enter the first DVD in your CD/DVD drive and restart your laptop. Depending on your model of laptop, press the F12 key to enter the BIOS boot menu, and then select the CD/DVD drive. Now, the computer starts from the CD/DVD drive with recovery disk. Then follow the instructions on the screen and Windows will re back reinstalled to factory settings (out of box).

  Check this box!

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Question aboput using the recovery disk

  If I use the recovery disk, it will remove the Toshiba assist installed on my pc? I don't have the tools and disk utilities.

  Thank you

  Using the recovery disc disc HARD integer will be erased but it is applied to factory as from the date of purchase. This means that everything will be installed again (all drivers, tools, and utilities).

  The laptop will be as good as new. And of course Toshiba Assist is part of the recovery image and it will be there again.

  Good bye