Hi Peter, time is planned in a future firmware update?

Similar Questions

• Time machine no longer works since this update

  Time machine no longer works since this update

  How do you know it doesn't work?

• Firefox Beta 23 crashed 5 times in the last hour since the update, twice with a BSOD of video driver failure. I can't understand another way to this post.

  FF was running fast and stable until the beta update tonight. Later he crashed several times, sometimes with a total system crash, sometimes with a system is unresponsive, sometimes with a video driver leading to a BSOD crash.

  I had to DL 22 release and restore. I am now on the output channel, not the beta channel.

  System Setup: Dell Latitude 6410, Win 7 x 64, 128 GB SSD, 4 GB of RAM, Intel video hardware. Everything is up-to-date.

  Trying to get out before it blocks again and then switching to 22.

  Java plugin is usually disabled.
  Toolbars are ABP, disconnection and download status bar.

  Update:

  Have been able to run > 4 hours stable release 22 without hardware acceleration and long-awaited performance. I identified that my Crucial necessary M4 SSD firmware updated because of a problem that causes the BSOD after 5000 operating hours. Since the firmware update has been applied, I was stable.

  Firefox may have been a catalyst, not a culprit. I wonder if my BSOD troubles began because FF or FF, as Flash module, was trying to make the disk space which had been rendered difficult by my bad SSD firmware.

  Will post again in 24 HR works normally on 22 and then try 23 update to see if it is resolved.

  Thank you all for the input. Hope my comments are useful somehow.

• Sansa Firmware Updater fails to install every time...

  I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...

  I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.

  Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).

  Any help would be appreciated. Thank you.

  SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).

• WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

  I got this response from Western Digital on my old hard drive My Book Essential Extermal.

  Thank you for your response.

  Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

  I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

  Sincerely,
  Nestor V.
  Western Digital Service and support

  If you encounter any problems with your external hard drive, this could be the problem.

  Well, don't know how it happened, but it works.

  Last night I went on the Web site of WD and downloaded

  1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
  2 WDSmartWare_Software_Updater_For_Windows_1_0_12

  After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

  This morning, I reconnected all of my readers, and he started to read the missing disk.

  The version of the driver file is now
  6.1.7600.16385(win7_rtm090713-1255)

  I'm not sure what did the trick, but maybe this will help someone out there.

  Good luck!

• Ask at the time of planning

  Hi all

  I ask your help for my question, I have the following example: (this is already the result of a query in my stored procedure):

  time_begin minute descr
  

  Hello

  I add the last time of the day in the table. This makes the query more flexible (some days up to 13:00) and on some days up to 16:00

  Try this:

  -You must include the time of the end of the day.

  Insert into student_schedule (TIME_BEGIN, TMINUTE, DESCR) values (to_date (' 2014/11/12 13:00 "," yyyy/mm/dd hh24:mi:ss'), '+ 00:00:00.000000 00', null);

  commit;

  SELECT

  To_char (time_begin, 'yyyy-mm-dd HH24') time_begin

  tminute

  CASE

  WHEN descr IS NOT NULL

  THEN descr

  WHEN lag (nvl2 (descr, time_begin, NULL) ignores NULL values, 1) over (partition BY order of TRUNC (time_begin) of time_begin) + lag (nvl2 (descr, tminute, NULL) ignores NULL values, 1) over (partition BY order of TRUNC (time_begin) of time_begin) > time_begin

  THEN lag (descr ignore NULL values, 1) over (partition BY order of TRUNC (time_begin) of time_begin)

  When time_begin = max (time_begin) over (partition by order of TRUNC (time_begin) of time_begin of the lines between the current line and unbounded following)

  then "end of the day.

  ELSE 'free of charge '.  round ((nvl (to_date (plomb (nvl2 (descr, time_begin, NULL) ignore NULL values, 1) over (partition BY order of TRUNC (time_begin) of time_begin), "yyyy/mm/dd hh24:mi:ss"))))

  ((max (time_begin) over (partition by order of TRUNC (time_begin) of time_begin of the lines between the current line and unbounded following)) - time_begin) * 24 * 60) | "minutes."

  END descr

  Of

  student_schedule

  ORDER BY

  time_begin;

  TIME_BEGIN TMINUTE DESCR
  ---------------- ----------- ---------------------------------------------------------
  2014-11-12 08:30 0:30:0.0 0 x 1
  2014-11-12 08:45 0:0:0.0 0 x 1
  2014-11-12 09:00 0:0:0.0 0 free 15 minutes
  2014-11-12 09:15 0:45:0.0 0 x 2
  2014-11-12 09:30 0:0:0.0 0 x 2
  2014-11-12 09:45 0:0:0.0 0 x 2
  2014-11-12 10:00 0:0:0.0 0 free for 30 minutes
  2014-11-12 10:15 0:0:0.0 0 free 15 minutes
  2014-11-12 10:30 0:30:0.0 0 x 3
  2014-11-12 10:45 0:0:0.0 0 x 3
  2014-11-12 11:00 0:0:0.0 0 free for 45 minutes
  2014-11-12 11:15 0:0:0.0 0 free for 30 minutes
  2014-11-12 11:30 0:0:0.0 0 free 15 minutes
  2014-11-12 11:45 0:15:0.0 0 x 4
  2014-11-12 12:00 0:0:0.0 0 free for 60 minutes
  2014-11-12 12:15 0:0:0.0 0 free for 45 minutes
  2014-11-12 12:30 0:0:0.0 0 free for 30 minutes
  2014-11-12 12:45 0:0:0.0 0 free 15 minutes
  2014-11-12 13:00 0:0:0.0 0 end of day

  19 selected lines

  Kind regards

  Peter

• Muse - business plans for the future

  Hello

  About to launch a major project for a client that will result in a website that should last for a few years and will must be constantly updated during that time.

  Are there long term plans to withdraw from the platform of Muse

  And is it planned in the short term to prevent users of IE8 to access content developed in Muse.

  Bravo for your thoughts.

  Muse is a relatively new product, were introduced in 2011. I doubt that it is only around a few years. He is actively updated and widely used in the design community.

  What about IE8, 3.68% of all users use IE8 in the world. Will be probably does not exist in a few years, if not sooner. (but there are always a few stranglers there)

  I doubt that Adobe would look at logic programming in Muse to block a certain browser.

• CC, the backsaving, and plans for the future

  Hi all

  In my workplace, we currently have CS5 (3 or 4 employees) and it has just upgraded to CC.

  This will naturally cause problems with the work between us and now we have to look at updated others.  What I have read you can only back save 1 version on indesign, do the same thing on illustrator/photoshop?

  Another question I have is finally the back except function will disappear from the CC?

  Thank you

  Hi Simon,.

  Files saved in the most recent version will experience problems opening in the old version because of missing features.

  I advise you to upgrade all of your users to the Adobe Creative cloud because it will be easier for them to work on data and shared files.

  For specific information about Indesign, let me know.

  Kind regards

  Sheena

• Time capsule starts only after the last update

  My Time Capsule (A1409, 2 TB) is do not restart after having applied the most recent update. Has worked for years in my small locker in the basement connected to my local network. Fan seems to be working (vibrations of feeling) which connection to the power source, but the LED shows NO color. HW-Reset either doesn't help not. Probably from power supply? As the machine is not under warranty, what are my options (all) to retrieve the data on it?

  Other options apart from opening and get the HD out and connect it to a USB box to retrieve the data?

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  Thanks for any input / advice / tips.

  Bonus question: any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  Probably from power supply?

  Vibration isn't the hard drive running... the fan... feeding is very well... the jury has no... was triggered by the update of the firmware, it would have happened soon anyway.

  What are my options (all) to retrieve the data on it?

  You MUST open the TC... There is no way to access the data except in order to open it... However, you can repair the TC using this method.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  It sounds gross... but has a long history in the world of Apple as a faulty weld is not a new problem.

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  We recommend that you do NOT. It is often not successful and it is better to keep an archive on a USB drive for a few months and once you have a decent amount of history to put the USB back to other uses.

  You can copy the sparsebundle to each computer... Apple has a set of instructions--small as usual.

  Backups transfer TM...

  Doco Apple. http://support.Apple.com/kb/ht5097

  Pondini doco http://pondini.org/TM/18.html

  Any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  A TC has only a function of archive built in. Whenever you press on archive it backs up the entire TC on USB... not possible for incremental backup.

  You can work around this by using Carbon Copy Cloner... which can save almost anything to almost anywhere... However, it is extremely slow more wireless when the backup drive is plugged into the USB TC rather than on the computer... To copy all packages to TC on computer... computer to TC... TC on the USB drive.

  On ethernet, it is full duplex and should work ok... but it is always faster to plug the drive into the Mac and so you travel go simple package.

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  I would certainly use the QNAP but with Carbon Copy Cloner rather than Time Machine. It is much more reliable and flexible... Although it lacks the possibility of several version of TM.

  A dual strategy of backup using TM and CCC is well worth... make clones bootable from all your computers on USB auto powered 2.5 "drives suitable size for each computer.

• volume planning calendar snapshot afer an update of the firmaware

  Hello

  After an update of the firmware ps6100 equallogic (from 7.1.2 to 8.0.5),

  2 volumes of table ago a midnight to to snapshot planning (* * by default) which is exploited.

  I want to delete this grid but I can't find where it is defined.

  Even using the cli.

  Thnaks for your help

  You

  C. HOWARD

  Tracks by default (DSS) snapshot on volumes with snapshot reserve to something else then zero and do not have a configuration snapshot on demand.  If you set the reserve instant volume to zero (0) DSS will not create the snapshot for a volume.

  Also to the CLI of group you can enable/disable or set the time of day where the default snapshot is running:

  GrpName > grpparams by default-snapshot-sched?
  Disable - disables the snapshot grid by default.
  Enable - enables the snapshot planning by default.
  Show - displays the current values for snapshot planning by default.
  start-time - value start time of the default schedule of the snapshot.

  Also note that if the reserve instant zero you will return the placeholder for the snapshot to the pool.

• Plan of photography does not update the CC of Lightroom license

  Hello world

  I recently downloaded cloud creative with Lightroom and made the 30-day trial. Subsequently, I subscribed plan of photography. However, the client creative Cloud continues to tell me to buy a license.

  My computer: Windows 7 64 bit with latest updates

  What I've tried so far:

  • Followed all the steps possible in Adobe FAQ concerning the activation of license problems
  • Signed and several times (in the CC customer AND also in the app itself)
  • Reinstalled Lightroom CC
  • Lightroom AND reinstalled creative Cloud customer
  • Cleaned with CCleaner just to be sure

  None of this has helped.

  And when I try to contact support, it gives me the opportunity to communicate with the community or start a conversation. But the chat option is a simple text element and cannot be clicked (browsers: Google Chrome, Vivaldi)

  Does anyone have an idea what else I could try?

  Thanks for the reply.

  Ned Murphy wrote:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

  As already mentioned in my post, I already checked that all possible questions from the FAQ, including

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  I didn't click the blue box and displays me three options: chat, community forums.

  The phone option has been crossed (not planned my subscription) and the chat option could not be clicked in any of my browsers.

  However, I found a post on a cleaning of Adobe tool and it seems that my hosts file was broken. It works now.

• Various menu flash black boxes do not show until wriggle on. This has been happening for some time and has not been fixed by updates.

  For some time now as bookmarks and Tools menus will be dark outside and only reveal after a quick mouse above. I am running windows 7, more recent updates and the latest version of Firefox. I have linked an example of picture of what happens to my bookmark menu.

  http://imgur.com/FUDNYOu

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? Otherwise, it might be a problem with hardware acceleration...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• So, for the 3rd TIME WHEN I REQUEST SUPPLICANT why NOT update only FF updated my browser?

  You see, I ask myself this same question twice before, because Firefox has once more for the third time last updated browser DESPITE MY PLAIDANT ASK TWICE BEFORE NOT to DO SO. but now I have a platform to make public DISHONESY of Firefox, put to task for defying a very adamant demand, specifically NOT UPDATE MY BROWSER, CIRCUMSTANCES THAT systematically, repeatedly occurred throughout all these years I've been with Firefox since 2005.

  How is it that Firefox continues to deliberately defy, ignore the wishes of its customers most loyal me inflamed beyond words, when I repeatedly made KNOWN QUITE WELL NOT to HAVE MY BROWSER updated.

  BUT NOW, AFTER ALL THIS TIME, TOGETHER WITH THE INSIGHT I HAVE RUN AS ONE INDUSTRY COMPUTER SPECIALIST I know very well why Firefox CONTINUES THIS PRACTICE WITH ABANDON.

  1. they do not like anyone was sleeping with the subject: config (then why did you never included it in the first place) as I do.

  2. they don't like anyone made modules incompatible extensions again as I do.

  3. they do not like someone tampering Firefox as I do.

  And all Firefox should do to reduce to nothing all the meticulous work I spend change about: config. configurations to accommodate my own and the needs of my company and all the hard work. spend time of activation of newly incompatible extensions, I need to work as effectively as possibleamong other things that I tweaked, THAT I EXACTLY WHAT YOU DO for THE REASONS I GAVE. YOU deliberately, to DO so hatefully. And that's the final reason for YOUR contempt total without taking account of the request of a customer. In addition, YOU, fIREFOX feel that since you wrote the code, and the owner of the code, YOU can insist USERS to follow the protocols of Firefox exactly as I ask.

  Another example of YOUR dictatorial to browse the web - what approach YOU feel that no one should dare to take a peek to content that is not the level of WHAT YOU BELIEVE IS purity AND ALL OTHER CONTENT CORROMPRE THE MORALS OF OUR YOUTH.

  In one of the cases where my browser has been updated despite my unyielding position against it, someone in YOUR ORGANIZATION has removed several sites for adults STRICTLY STRAIGHT to my favorites.

  SO now, NOT ONLY DO you HAVE AN ATTITUDE INTRUSIVE big BROTHER THAT NOBODY DARE DEVIATE FROM the OFFICIAL FIREFOX BROWSING PROTOCOLS BUT NOW YOU have put in PLACE A CENSURER CAMPAIGN ON WHAT YOU CAN READ, WATCH at all SIMPLY BOOKMARK or.

  BUT IT IS EVEN WORSE, MUCH WORSE. THE LAST TIME TWO YOU UPDATED MY BROWSER AGAINST MY WILL, YOU GAVE ME THE REASON MORE LAME MORE STUPID, INSULTING, STUPID WHY YOU UPDATED TWICE BEFORE AS IF THEY WERE JUST CIRCUMSTANCES THAT OTHERWISE NEVER WOULD HAVE VIOLATED AS WELL AS THE PRIVACY BEING THE TERRIBLE REBEL COMMERCIAL PRACTICES, ARROGANT AND SIMPLY TO YOUR MITIGATING CUSTOMER. BUT NOW IN ADDITION TO PROVE YOURSELF TO BE A MEGALOMANIACAL SOCIOPATH YOU HAVE REVEALED YOURSELF TO BE ABSOLUTE LIARS CHRONICLES.

  AND IT OF BECAUSE I AM RESPONSIBLE FOR MY COMPUTER SERVICE COMPANY AND HAVE A LOT OF COMPUTERS UNDER MY CONTROL AND SUPERVISION. I HAVE ONLY RECENTLY PASSED ON SOME OF OUR COMPUTERS FROM IE TO FIREFOX AS A TEST AND I AM DEPRIVED OF WHAT HAPPENED BETWEEN THE COMPUTERS THAT WERE USING FIREFOX AS A TEST STUDY.

  AND WHILE THE TRUTH BEING WHAT IT IS, YOU ARE CAREFUL NOT TO MESS WITH MY BROWSER, AS IT IS WELL CONFIGURED TO NOT UPDATE, WHICH, IN YOUR HONOR, YOU GAVE HIM A LARGE DOCK, BUT YOU GRIMLY UPDATED SIX COMPUTERS THAT WERE PART OF OUR TEST STUDY
  WHO HAD THE SAME CONFIGURATION OF BROWSER REQUEST NOT TO BE UPDATED BUT THAT YOU UPDATED HOWEVER. THESE COMPUTERS WERE PART OF A STUDY OF PRODUCTIVITY WHICH, BY UPDATING IT SET ALL THE SMALL EXPERIENCE OF OUR BACK A LITTLE BIT.

  SO, WHAT AM I GOING TO DO WITH YOU? I HAVE TO REALLY THINK LONG AND SERIOUSLY ON HOW TO RESPOND TO AN ORGANIZATION THAT HAS SHOWN NOTHING BUT THE WORST KIND OF APATHY, PRACTICES DISHONEST COMMERCIAL I'VE SEEN SINCE BEING IN THE COMPUTER SECTOR.

  Automatic updates can sometimes damage the files in the profile, and I always read several web for a complaint indicating that it has not changed. This is one of the reasons why I don't like the automatic updates.

• KB979683 installs several times each day with success - Virgin of updates installed on Windows 7

  OK so every day I turn on my laptop and whenever I stopped it, Windows Update installs KB979683. It is said she is successful, but then it will try to install it again the next day, or the next time I turn it on. This can happen if I let WU to install by itself, or if I said manually install and as mentioned, he's trying to install every time I stop sense, I have to wait 5-10 minutes everytime I want to stop my laptop. I saw the article on the problems with this KB and XP, but I am running Windows 7 (x 86). In addition, my installed updates window is empty - according to this, I have no installed all updates so I can't remove it manually and install this update. Any help? It's driving me crazy.

  This problem is now resolved, even if a different method from those proposed above. I found a user with a similar problem on a blog - it may or may not have something to do with Visual Studio 2008 SP1. In any case, the solution is to increase the size of the registry: HKLM: System: CurrentControlSet: RegistrySizeLimit

  I put this to decimal value 4294967295 and restart, has run the SFC engine and reintroduced updates.

• I constantly receive error messages because most of the time that they do not install Windows updates

  I'm not all that warned about the computer, but I managed to find sort of tutorials to help me. But I still have problems with windows updates, firefox plant all the time I use especially it is good that told me to use firefox. My computer is very slow and Windows Defender im always invited to allow allow or deny the same programs. Being a Crawler.com and another editor says not available but in its URL, it says that it is also time Crawler. If I deny it he returned to allow the authorization. If I allow it, it still appears upward. I think I have way to many scanner, difficulty, uninstall spyware, etc... I need essentially help clean and find the right protection and how to install updates. For the moment anyway. Thank you... PAM

  I think you computer may be infested with malware/virses etc..

  As you can see by (http://www.elephantboycomputers.com/page2.html#Viruses_Malware) a computer cleaning can take a bit of time and effort. TaurArian [MVP] 2005-2010 - Update Services