Hidden after system restore files

Similar Questions

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• Where are the "System Restore" files in Windows Vista Home Premium

  Where are the "System Restore" files in Windows Vista Home Premium.

  I would like to simplify the installation process.

  Is there a program in Windows Vista Home Premium which can create an image disk for future use.

  Is there a good disk image program/software?

  Can I record a restore point on an external drive? That is, only the last 5 days of "restore points" are available in the system restore.

  Hi SoundHealth,

  Follow the steps in the article.

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Back up your programs, files and system settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  No, you can't save a restore point on an external drive.

• File missing after system restore

  Dear Sir.
  Today, on a tecra M2, I did a system restore, but suddenly, the message came that I had to re - install the following file: \system32\ntoskrnl.exe :

  How can I do this: put in the recovery cd or just make a formatting the drive with the restore cd?
  Thanks in advance
  drweekx

  Hello

  System Restore is a very useful tool, but it is not the miracle solution! :-)

  Your "ntoskrnl.exe" file seems to be corrupted and this file is very important as you BONE!
  You can try to start Notepad, and then press the key "F8". This will take you to a menu and you can choose the 'last known good configuration"and the VGA Mode.

  If you are lucky your laptop work after that, otherwise you can only recover the portable whole! But if you have important data on the NB you safe to an external drive!

  Goodbye Chris

• Missing files after system restore

  My computer crashed in what appeared to be a virus.  I did a system restore, but now I always have missing files.  I can find them if I search but I can't navigate to them.  Any ideas?

  Never mind.  The restored files were hidden... weird.

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A500-1CO - loss of data after system restore

  Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.

  Is there a way to recover all or part of the lost data?

  Please help me. Thank you.

  Hi mate

  Unfortunately, I think that there is not much to do now.
  Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.

  You should read the user manual or information before starting the recovery. :(

• Update and Service Pack installation after system restore

  Hello

  I am a Customer Service representative your question for Windows XP. Here's the issue: System Restore will be restoring all the Service Packs and updates installed Windows XP on a Windows XP computer or at - it need to reinstall everything after the system restore?

  Please enlighten us on this issue.

  Thank you.

  a factory restore is not identical to a windows system restore.

  While a restore of windows re - interrupts the previous versions of the system and program files

  a factory restore is the original state of the computer at the same time that he has left the factory.

  so a factory restore will wipe the hard drive and then re-install all software provided with the computer original.

  to this end, if a faulty the system restore windows to make the system functional again, then the restoration of the factory is the ultimate option to make the system work again.

  the only way to solve a software problem is sometimes with the method above.  However, the method above can not solve the problem below.

  in return is that a windows system restore or a factory restore can overcome problems related to defective hardware.

  in any case, keep in mind that, before executing a factory restore, the user must copy their personal files and email boxes and internet Favorites before performing this procedure.

• His lost after system restore

  Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.

  This may be of some use for you guys:

  Value of the property
  Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
  Status 0x0180200a started
  Blocking problem 0 x 00000000 (0)
  Service IntcAzAudAddService
  Blocking capabilities 0 x 00000000
  Config flags 0x00000000
  Class MEDIA
  Manufacturer Realtek
  Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
  Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888
  HDAUDIO\FUNC_01VEN_10EC
  HDAUDIO\FUNC_01
  Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
  Location internal High Definition Audio Bus
  Bus number 0x00000000
  Name of the enumerator HDAUDIO
  Description Realtek High Definition Audio
  Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
  Name of the object physics \Device\000000a2
  Number of UI 0x0000ffff
  BusType GUID {41203534-2037-3144-2042-422044362041}
  Former bus type 0x00000005
  Type of device 0x0000001d
  Installation state 0 x 00000000
  The device address 0 x 00000301

  Oem2.inf of device Configuration file
  CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
  AssociatedFilters Wdmaud, swmidi, redbook
  Pilot RtkHDAud.sys
  InfPath oem2.inf
  InfSection IntcAzAudModel
  InfSectionExt. NTx86
  ProviderName Realtek Semiconductor Corp.
  DriverDateData 00 40 18 67 CA 01 E7 D7
  DriverDate 17/11/2009
  DriverVersion 5.10.0.5983
  MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
  DriverDesc Realtek High Definition Audio
  SetupPreferredAudioDevicesCount one

  Class MEDIA
  Audio, video, and game controllers
  Installer32 MmSys.Cpl, MediaClassInstaller
  MmSys.Cpl, MediaPropPageProvider EnumPropPages32
  Troubleshooting-0 hcp://help/tshoot/tssound.htm
  Icon 3004

  Thank you!

  You can try to contact support from Realtek:

  http://www.Realtek.com.tw/contact/

  Also, try to run this fixit:

  http://support.Microsoft.com/mats/AudioPlayback/

• lose the connection to the net after system restore

  I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)

  There is no problem with the connection that the net works with other PC not mine

  When first I used the net all the me I connect the Caron and its automatic execution

  so why it dosent run now the files make me lose the file how to fix

  When you did the system restore you have lost the connection to the network.

  Create a new connection

  Dale may

• Disk space HARD disappeared after system restore

  A day ago, I decided to free up space on the C: drive of my computer. By the time my drive was 10.4 GB of space. I deleted some old games and files, releasing much of the space and defragged my system gives me a total of 29.5 GB of space.

  Shortly after, I was forced to do a restore of the system on my computer to correct an error. To recheck my space on the drive, he came to 10.4 GB. Deleted programs have not returned and after a thorough check of the system.  I tried several other forums as to find an explanation for the missing space, but most of the answers in the forums does not solve the problem at all.

  What happened to the 19GB of space freed after deleting these files and old games?

  Hello

  Since you did a system restore, fragments of programs that have been installed on the system earlier were able to return. I suggest you follow the steps mentioned below.

  Step 1:

  Run Disk Cleanup on the system. See the article mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2:

  I suggest you to do a Disk Defragmenter. See the article mentioned below.

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Vista - what should I do after system restored?

  My home edition vista recently will not start. After I turned it on, it loads for a while and stops automatically. I tried pressing some buttons for example F2, F8, F10 function for repair and recovery, and it is able to load the previously saved startup page. After that I turned it off, it cannot start again. I tried twice on the recovery of reparation and restored successfully, but now the repair and recovery seems no longer works.

  (1) what should I do if I managed to open the start page?

  (2) what could be the cause of it? In any case to restore so that it will work like new?

  Hello

  See if that helps you.

  Startup Repair options.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall options.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• No Internet connection after system restore

  I had problems to open Windows Live Messenger last night, and I tried to do a system restore, as I noticed there were a couple of updates that have been installed throughout the day where I suspected may have caused the problem.

  I went back to a restore point from the earlier in the day when I heard that Messenger was working. Of course, Messenger open instead of crashing on startup.

  Unfortunately, I am able to connect to the Internet. Network connections settings say it's "id" my wireless network, but nothing changes. Is no longer, I get an IP address. I have other computers on the network that connect without problem.

  I tried to install a Wireless N USB adapter and the problem still remains. Finally, I gave and did a complete restore to factory settings. Good news is that I can now get a connection. Fortunately, I had my backup files.

  Research online, it seems that many people seem to have had similar problems, but not after a system restore.

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick