Hide pivot column

Similar Questions

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• Hide a column in a view, but show in other

  Hi all.
  I need to hide a column in the view of the 'Table', but the column should appear on the "PivotTable".
  I know we can hide pivot (exclude) and show on table, but I want to know if the opposite is possible.
  
  This is necessary because I do a selector to display for writeback. And I don't want to see all the columns to writeback table mode. But he needs to be there on the PivotTable.
  Please let me know if it is possible.
  Thank you.
  Vinay

  Yes, we can do that.

  Extend the check on the 'skin' in the tab formatting of column you want to display in the table.

  Now, duplicate, the same view and in the pivot table column initially you will not see the displayed column.

  Now in the properties check on "hidden" in the "topics"format"and you won't see her again and now uncheck the 'hidden' and shoud you will see the column displayed in the pivot view"

  This way, you will have the column hidden in the table view and displayed in the PivotTable.

  It may be useful
  Prash

• -Column Chooser to show or hide a column

  Hello
  
  How we can configure the column Chooser so that she can only show or hide a column.
  Please let me know.
  
  Thank you
  Marlene

  Hi Marlene,.

  to do this use view selector...

  do 2 ore more reports that you want to display with pivot 1 pivot 2, excluding the column that you are not wanted in the report,

  Now add these display to display rename them selector views in such a medium user understand correctly...

  hope it works...

  And, you're all previous discussions are not closed... If they're handled need to close...

• How to hide the column in a table in the adf.

  I created the table of the ADF and surround it in the collection of panels, the data in the table from the bean to support variable. Depending on the State, there are a few columns that must hide with the user. I used visible = "false", where the false value will come from backing bean. However the user to the table always have the ability to display the column. Is there any one to hide the column with the user at all times. Fixing the code example:

  < af:column sortable = "false" headerText = "column1" id = "c13" visible = "false" >

  "" < af:outputText value = "{row.columns1} ' id ="ot13"/ >

  < / af:column >

  Hello

  Use the rendered property?

  Concerning

• I can't hide the column grid overlay in Adobe Muse?

  Hello

  I would like to know whether or not I can hide the column grid overlay in the Muse?

  Reason is I want the faster preview as I can get, because I saw the page quite often.

  Usually, I click on Cmd - P and wait 6-7 seconds before the Web page is displayed in the Muse in preview.

  When I click on Cmp - E to generate HTML and jss files, it takes about the same thing.

  So I thought why not hide the column grid and watch the page as a preview immediately. Something like Cmd - W in Indesign.

  Is this possible?

  Under display: display / hide grid Overlay (5th from the bottom)

  

• hide a column in the report

  HI Apex community
  I want to hide a column in a report based on an item(#item#) of the same report.
  for ex, if the Bill is zero line DUE to hide then this particular customer
  I tried with the condition is null value equal to #invoice # but it hide the entire column instead of individual columns.
  
  Pls suggest me how to implement this.
  
  
  4.1.1 Apex oracle 11 GR 2, oc4j, linux.
  
  
  Thank you

  Well Yes, I had this problem once - it happened only in some browsers.

  I do not think that I solved it with great elegance, only by obscurity

  NVL2 (my_value, ' / i/blank.gif ',' / arrow_down.gif/i ')

  then set the target page as a result.

  In theory, I think you could add an id to those you want to hide, and then run some jquery to hide all items.

  Scott

• OBIEE 11 g 90 degrees rotation pivot column header

  Hello
  Does anyone know how to rotate a 90 degree pivot column headers?
  Thank you

  Hi user,

  It works in IE, http://blog.trivadis.com/b/andreasnobbmann/archive/2009/07/17/vertical-text-in-obiee.aspx

  Kind regards
  DpKa

• How to hide a column in OBIEE 11 g

  Hello
  
  I'm trying to hide a column of the dashboard layer presantation of the OBIEE 11 g. But it does not work.
  
  I do the following.
  
  Open the column permissions tab.
  Had no access to everyone.
  Didn't give no access to the user/Application role.
  
  When I go on the web, the column appears in the list of tables. But, when I select the column and press the result, is not the outcome.
  
  This means, by following the steps above, it is restricting the data but the visibility of the column is already there.
  
  Same way as it works for OBIEE 10 g. Could if it you please let me know this feature has been removed from 11g or if she is still there then how we can reach that.
  
  Thanks in advance
  Niraj

  Hi Andrew,

  This is a bug in OBIEE 11.1.1.5.

  Bug 12352010: RESTRICTED COLUMNS MUST NOT SHOW DISCIPLINE

  This is fixed in version 11.1.1.6.

  Kind regards
  Sandeep

  Published by: Teresa Sanchez on March 28, 2012 12:16 AM

• Trying to hide a column but the header reappear on the following pages

  Hi all

  Here is my little problem, I have a table, a bit normal. What I try to do is the following:

  I wish I could hide a full column based on the data. I was actually able to hide a column, but my problem is that when the table breaks into a second page, "header cell" on the second page of the column I hid reappear.

  Here's how I did my stash:

  -In table Initialize script, I check a condition, and if this condition is met, I'm hiding the header cell.

  If (Verif.name4_we.rawValue == "" or Verif.name4_we.isNull) then

  HeaderRow.Cell3.presence = "hidden".

  endif

  -For normal lines, I always check the same exact condition and if the condition is met, I hide the cell.

  If (data. Page1.test.Table1.Verif.name4_we. RawValue == ' ' or data. Page1.test.Table1.Verif.name4_we. IsNull) then

  .its presence $ = "hidden".

  endif

  This facility works pretty well if I only have one page:

  
  5 is my header name (I know it might be confusing, I'm sorry), it's page 1, column 6, and 7 are in fact hidden.

  It's what happens on the following pages:

  
  As you can see, only the header reappear, you can clearly see that the elements are still hidden, but because the header appear, it looks
  as there was a full column.

  Does anyone have an idea of what could be my problem?

  Thank you very much!
  Max

  Are you able to change the width of your columns?

  This is the last trip, I did:

  You must first, double-click the rule to open the palettes of drawing AIDS (or go into the top-> palettes-> drawing AIDS menu) and set the units to Points.

  You need tables and a structure, a table which will show real information and a structure that will be imported into your program with the correct width (column DialogResult.Cancel will have a value of 0.001 in the structure). The structure is hidden in the page layout.

  In your table initialize script, write something like this:

  Set the width of columns by using our structure.//Empty imported have a width of 0.001

  var width = Concat (data. Page1.struct.Col1, "pt."

  data. Page1.struct.col2, "pt."

  data. Page1.struct.col3, "pt."

  data. Page1.struct.COL4, "pt."

  data. Page1.struct.col5, "pt."

  data. Page1.struct.col6, "pt."

  data. Page1.struct.col7, "pt."

  data. Page1.struct.COL8, "pt."

  data. Page1.struct.col9, "pt."

  data. Page1.struct.col10, "pt")

  Table.columnWidths = width

  Explanation: You concatenate each rawValue of your table that contains the width of your columns with "pt" (the unit), in this way, you can set the widths of all columns in a single command (Table.columnWidths = width).

  This should resize the entire column, including the header. (It works on my side)

  Don't bother to ask if you have any other questions

  Max

• Hide the column in RPD problem

  Hi all
  
  We want to hide 3 columns in RPD and did the same thing in the permissions.
  
  However, we can still see them.
  
  Is someone can you please help me what could be the problem here?
  
  Regds
  Mano

  Hello

  Simply restart your services and check it once. It should work.

  Make sure that you restrict access to this particular user/group or not and also turn it off for everyone.

  Thank you
  Ananth

• Hide a column

  Hello
  Hide a column in select query output?
  
  I have a Rank() function in my application for the calculation of the other results, but I don't want to show the Rank() in the result output. Is it possible to hide?
  
  
  Thank you
  Harhsini

  Easy - nest the query, for example:

  select col1, col2, col3, col4
  from   (select col1, col2, col3, col4, row_number() over (partition by col1 order by col2) rn
          from some_table)
  

• Is it possible to hide / show columns in the dashboard?

  Hi all
  
  It is my very first post in this forum OBIEE.
  
  My requirement is to allow users to select what they want to see answers of columns asking in dashboard. For example in the application of responses he is 10 columns and 5 of them are hidden. Is it possible to change this property hide these columns hidden in the Dashboard?
  
  Thanks in advance.

  If you are thinking about a multiple selection prompt that has your names of columns as values, then no, you can't. But don't forget to uncheck the "Automatically refresh when a new column is selected" at the top of the display of the column selector. This will allow your users to choose all the appropriate columns before clicking on the button 'Go '. Which ' forget to mark the message useful (s) (at the top right of the post there) If you helped.

  Thank you!

  Edited by: David_T May 21, 2010 07:08

• Hide a column in a table view, but show it in another

  I need to hide a column in a table view, but display it in another view of table in the same report. Is this possible?
  
  Any help on this is appreciated.
  
  Published by: VNC on January 11, 2010 09:26

  Hi, VNC,.

  If you're clever with javascript, you can probably write a script that would set the DISPLAY None CSS property to hide the column in the table view you want, but don't leave in the view that you want.

  -Joe

• How to hide a column in a RTF based XML output

  I have a XML output that has a column called STATE of a "REJECTED" or "PROCESSED"
  
  I have another column called REJECT_DESC. This is null when the State is PROCESSED and it fits the description of rejection if the status of this line is REJECTED.
  
  In a RTF I want to show if the value of REJECT_DESC if the line has a status of "REJECTED".
  
  How can I show only this column when she is rejected?
  
  I have the group by the State, so the report separates the lines... but how to hide the column? I don't want a column null
  
  Thank you

  I think that the STATUS will be same in the XML data, and you have two lines in your table. A line for all the column headings and another line for repeating group for these column values. So you can simply keep,

  Reject the Description //row1 the title of column
  row2 column values