hide the port number in the URL

Similar Questions

• hide the url in the time of execution

  Hi gurus,
  I am using oracle 10 g forms, I developed a form
  I'm in this form it is displayed in the web browser
  http://192.168.0.15:8889/frm/frmservlet/?from=test.FMX and also how to hide the main dos window, I mean the default window/MDii window that appears
  running.
  
  can I hide the "192.168.0.15:8889/frm/frmservlet/?from=test.fmx" cela other users running that this form by accessing my ip address when executing the form.
  in fact, I've seen this hiding but I did not how to hide this
  
  can someone tell me how to hide this by giving the alternative name of my own...

  Yes, it is possible. To hide the URL, you need to use HTML frames and assign forms Servlet page to one of the executives. Then call your application using the html frames page. Here are the basic configuration:
  1. create a simple index.html as follows:

  Attention to change the HOST: PORT for your host and port information.
  2. save this file in the directory docroot for the HTTP Server

  3. create a dummy empty file in the same place named top.html (to represent the Executive)

  4 run the http://HOST:PORT URL / index.html or simply http://Host

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• How can I stop the crawlers and the display of the url of the site of the trial?

  I read about this a few months ago and can't seem to find it in the knowledge base.

  I added a domain name to my site of the trial and the address of the original trial is now see in the search results.  Can someone tell me how I can prevent crawlers and hide the url of the search results?

  Test: http://galleryofjewels.worldsecuresystems.com/

  With added field, want to show this area only in search results: http://www.Gallery-of-jewels.com/

  Thank you

  Nancy

  Liam,

  I see in the list field, my new domain with and without www. more galleryofjewels.worldsecuresystems.com (secure) and galleryofjewels.businesscatalyst.com (System)

  Should I replace galleryofjewels.businesscatalyst.com (System) with Gallery - of - jewels.com?  and

  galleryofjewels.worldsecuresystems.com (secure) with Gallery - of - jewels.com?

  

  Thank you

  Nancy

• Port number of the DMZ URL mask

  Hello
  
  I just finished the configuration of the DMZ node to irecruitment for a client module. I followed Doc Id 380490.1 for installation. The external URL for the customer is of the form http:// < hostname >: < port >/OA_HTML/IrcVisitor.jsp. Now, because of security concerns the customer wants to hide the port number of the URL and post it on the internet for the registration of external candidates. How do I remove the port number of the URL and post the URL as /OA_HTML/IrcVisitor.jsp or http:// < hostname > < hostname > http:// / IrcVisitor.jsp.
  
  Concerning
  
  Navas

  Hello

  Please see these documents.

  Note: 578001.1 - how to configure Apache in R12 (10.1.3) listening on a Port Limited)<>
  Note: 356080.1 - how to run Apache on Port 80 in Apps 11i]

  Thank you
  Hussein

• Remove the port number of the URL

  Hello
  My users won't 9704 Port number in the URL. Is it possible to remove completely from the URL port number.
  
  Thank you

  OBIEE is running on OC4j, that's fine. But you can't have two servers with the same ports in a single system. 80 is default, if you want OC4j to execute the judgment by default IIS on the server. (Go to services, stop IIS related services). then change the Oc4j port to 80, and then restart the OC4j. He will work with the URL without port number.

• Hide the number in a numbered list (or to put on its own line)

  I am writing a document with headers that are numbered and come from the four levels of depth. There are six cases of the title of level 1. I would like to format it as a number with two digits (e.g. 01), then a horizontal rule, then the header text.

  I imagine that there are two options:

  1. Insert a new line somehow between the number and the heading text, and then apply a rule and shift so it lies between the number and the text. The problems I meet here are that I can't seem to add a new line between the number and the text and that when I change the format of the number 01, 02, etc, it also changes for level 2 headers (which I don't).
  2. Hide the number on the list, and then add the number as text and the appropriate format. The problem I have here, is that when I change the paragraph style (bullets and numbers-> Style of numbering-> number of virgins, it messes up my level two lists later (all first everyone start correctly with 1 (1.1, 1.2, etc.), but those in sections 2-6, all start with 0 and do not reset properly (which should be 2.1 is 0.6 after the end of article 1 to 1.5).))

  In the end, I want to see something like:

  01

  ----------------

  INTRODUCTION

  1.1 welcome in society

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  1.2 the responsibility

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  
  

  02

  ----------------

  REQUIREMENTS AND STANDARDS

  2.1 desktop label

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.

  2.2 unacceptable behavior

  Lorem ipsum dolor sit amet, adipiscing elit computer. CRAs had lacus vehicula, convallis non odio, imperdiet libero. Integer faucibus metus at cursus fringilla mi. Morbi finibus, purus ac vestibule ornare, erat varius arcu, vitae risus quam ligula aliquet ultricies tortor. Vivamus lectus tincidunt sit amet, convallis libero. Curabitur interdum ipsum dolor sit amet gravida pellentesque. Aliquam non magna vitae ipsum ullamcorper ultrices. Aenean mattis condimentum mauris placerat efficitur. Donec nec elementum, lacus. Proin purus magna, laoreet eget, convallis eget nibh ac efficitur. Donec varius diam sit amet, faucibus porta, mauris faucibus nisi EST, in luctus, mauris nulla sed risus. Nullam quis ligula libero. Surpassing molestie lorem id purus ultrices, pulvinar eros. Amongst rutrum odio quis quam auctor sollicitudin ac in ex.!

  I came with two possible approaches.

  First is to create the paragraph style title with a rule above and set the vertical offset to move under the first line and set the column width and add dashes left and right to refine the rule. You need to add the line breeze then manually or using find/replace to force the text to the line under the number.

  Better, in my view, is to set up the position that the two paragraphs, the first vacuum, but established the list of numbers with the following style set to a paragraph style that you use for the title of chaperones itself and which in turn the value style following the level 2 header. Together as the two first styles aligned Center and do something similar to above the rule, but I would use the following rule in this case.

  For a numbers level, you want to add the 0 in front of the marker number indicates rather than as part of the style number (this will only work if you have topics 9 or less) but the removal of level 2 and low styles, and for level 1, you must also remove any punctuation or white space after the number so the rating 0 ^ # only.

• Firefox automatically adds the port number in the address bar when it is not.

  I work for an ISP company that implements regular routers for a customer locations. One of the things I need to change about it is to assign the management port 8080. For example, 192.168.0.1:8080. Once I try to install a new router that Firefox automatically assume I want to go to the same port 8080 and automatically concludes for me. Since the new router has not been configured with the 8080, yet I can't. So basically I would like to see if I can stop Firefox automatically enter this bit of information. It is very annoying and even more annoying that I have to use another browser to make changes since Firefox can not. I found a similar fix posted when Firefox will automatically ".www" but which did not fix my problem.

  Disable the URL bar auto-complete feature. You can always select an address already used by the arrows down on the drop-down list of AutoComplete, but Firefox won't add characters to the URL as you type. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search box that appears above the list, type or paste the filling and make a break while the list is filtered

  (3) double-click the browser.urlbar.autoFill preference to change its value from true to false.

  Who help me?

• Name of the resource does not COM port number

  Hello

  When I connect computer Board, I use

  ResourceManager.GetLocalManager (). FindResources("?*")

  to get resource name ("ASRL11::INSTR") and use that name that I invoke

  A session = ResourceManager.GetLocalManager (). Open (Name);

  to get the session and get the value of the property HardwareInterfaceName of the session.

  The problem is that the COM port number in the property ("Com10") of HardwareInterfaceName does not match name the resource. The COM port number is correct, that it is the same, as noted in the Windows Device Manager. But why the name of the resource 'ASRL11::INSTR', it should be "ASRL10::INSTR".

  Does anyone have an idea?

  Thank you

  Eva

  Hello

  Port 10 is reserved for the parallel port

  Curt

• Need to change the com port number, but users do not have administrator rights

  Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports.  Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.

  I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.

  Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.

  Thanks in advance.

  Hello

  You have the computer connected to a network or domain?

  It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• hide the phone number (identity)

  Hi, is there an option in the blackberry api that allows me to hide the mi phone number when I make a call? I need to make an application that allows the user of a phone call, but I want to change the phone number to be shown.

  Thank you

  No, this is not supported.

• By the way a specific port number

  Hell-o,

  My question is about the PIX515e. We have a Server Windows ISA firewall we want to retire. I need to move the ports that have been opened in this area of ISA for the PIX. On AIS, he simply says "send and receive port tcp 5510' for example. Is it possible on the PIX of this port is very simply to apply. Without having to create a static entry? A way to simply open a specific port number?

  Suggestions, ideas or advice greatly welcome,

  TIA,

  Gary

  Which starts the connection, the interface of high security to low or low security interface to high? If she is brought down, do nothing, it will allow by default. If it is low to high, you must 1) of static type and 2) an access list. The acl is not reference IPs, but it should (security reasons - the whole point of the PIX). For example:

  (1) static (inside, outside) subnet to the 10.10.10.10 x.x.x.x 255.255.255.255 mask (or use a range of IP addresses)

  or

  static (inside, outside) 10.10.10.10 10.10.10.10 (if nat disabled)

  and

  (2) access list 102 permit tcp any any eq 5510

  or

  access list 102 permit tcp any host x.x.x.x eq 5510 (better)

  or

  access-list 102 permit tcp host y.y.y.y host x.x.x.x eq 5510 (best)

  Access-group 102 in external interface

  It will be useful.

  Steve

• Change the port number of the IOM servers

  How do I change port number of servers IOM to 14000 to some other port after installation/configuration and use of the server for more than a year.

  Connect to the weblogic console and stop the server instance managed IOM. Select the IOM server instance and change the port. Start it up again, then EM to change all internal references to the new port. Also change any other application integrated to reflect the change of port.

• How to limit navigation directly via the URL when the user tries to type the page number and access this page in ORACLE APEX 4.2

  Hi all

  I developed an application where I have 6 pages and 5 tabs and based on the user role I posted the tabs for the user to access these pages.

  But when the user, who doesn't have access to the particular page (say, page 2), but still the user can navigate to it directly by typing the page number in the URL.

  I want to avoid such scenarios.

  eg: http://Apex.Oracle.com/f?p=110:2 , when the user type this in the address bar, it navigates the user to this page even if this particular user does not have access to this page.

  How to prevent the user to navigate through the URL, if the user tries to navigate directly through URLS rather than tabs, I have to give the error message.

  Version: ORACLE APEX 4.2

  Thank you

  Good reading this recent post

  Re: Authentication at the Page level

  All links to a page and the page itself must be secure.

  You can also consider the protection of session state to prevent tampering of the URL.

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• Port number of the IP address and CC

  I have problems with CC of messages telling me I'm not connected or connected, but I still go to the app. Several times I'm not able to update either. My Manager asked me to ask the IP address and the port number used for cloud to adobe. Anyone know?

  Hi Jan,

  Please see the About Adobe Creative Cloud Packager

  I hope this helps!

  Kind regards

  Sheena