High ambient Temp

Similar Questions

• Correct operating temperature of Y410P?

  Hi all

  I have a problem on what is the right temperature of work for Y410P? Mine is about 50 c idle and about 80 c on the GPU by doing a game. I play in air-conditioned unair emviroment, room temperature is around 31-33 c. Is this really?

  Thank you

  For ambient temp of 31-33 C, your laptop is GREAT. Your ambient temp is high for a laptop.

  I advise you to use a good portable cooler and external fan showed up on the laptop in order to circulate the air. (If you can't move to an air-conditioned room)

  I have the same setup and my laptop still works at 45-50 nomral, its 3 years now. The game max GPU temp is 75-76 and 80 CPU (due to Turbo boost)

• low current strength using 4132

  Hello

  What is common the lowest that can be forced by using or pxi-4132. I want to force 5 AU to measure the tension through our DUT. However, when I tried it making the tension values were really high. I was supposed to read a value of less than 4 v, but the value that I read was 5.5 V. But when I used the keithley 2611 for doing the same pressure reading is less than 4 V. Why I read great value using pxi 4132.

  The lowest current forcable is 200nA in 10uA Beach (2% of range).

  The accuracy of output in the range of 10uA 5uA is 3.7nA.

  Output accuracy in the range of 10uA 5uA is 2.4nA.

  For complete specifications, see:

  http://www.NI.com/PDF/manuals/375128b.PDF

  If you need more channels/precision and do not need the output 100V, take a peak at the SMU-4141, which has 4 channels of isolated Bank (who share a common LO).

  Depending on the sampling frequency, the accuracy of maximum output in the range of 10uA 5uA is 1.8nA.

  Depending on the sampling frequency, output maximum accuracy in the range of 10uA 5uA is 1.8nA.

  Note that these levels of accuracy requires the ambient temp to stay within ±1 ° C from the last calibration auto and ±5 ° C external cal.

  For complete specifications, see:

  http://www.NI.com/PDF/manuals/375663a.PDF

• All games freezing randomly without crashing

  When any game it freezes / crashes after a while seemingly random. everything just hangs and forces me to make a discount to zero manually. I tried to reinstall windows and perform a clean boot. None of which worked.

  I ran prime95, furmark and chkdsk to confirm that my CPU, GPU and the disks work.

  giving to sfc/scannow doesn't hint at something is wrong.

  I don't get a "blahblah.exe has stopped responding" either as the whole PC crashes just, nor make a crashdump because I don't get a BSOD.

  what I suspect now is that my CPU might be overheating, as I played the same games on this PC before and it's 60 ° C when I'm not playing.

  Intel i5 - 3570K @3. 40 GHz

  NVIDIA GeForce GTX 670

  corsair vengeance 2 x 4 gigabytes LP

  POWER SUPPLY 750W

  EDIT: finally got a minidump BSOD I'll download it file.

  Oops - you had already run sfcscannow. Forgotten that when the liquidation of my OP.

  Also, I confused the 60 C at idle with the gpu.

  The processor is running too hot. 95B is close protection thermal cut off during an i5 3570 and will shorten the service life of the processor.

  Mine rarely goes over 65 - 70 c at full load, even with high ambient air temperatures.

  60 c at idle is too high for a time slowed down on cpu or gpu. This may indicate poor

  airflow in your case.

  Take the side panel turn off your machine and run a fan in the case (or not) and the time

  should fall if high temperatures are due to poor circulation of air in the case.

  If they do not fall, reapply new thermal paste for the cpu can help, but an aftermarket cooler

  would also be a good addition, if you are not already using one.

  It is also possible that the speed profile of the fan for the cpu and the gpu are too shallow (assuming that you are not running

  the fan to the cpu at 100% all the time), but this cause normally only fan speeds for up and down a lot and should not result in a heat block. When you are not running the cpu at 100% fan, using a fan speed profile steep is recommended with a gaming machine, anyway.

  From a fan profile approximately 50 + % and bump the speed a little will it keep cooler processors of the appearance and helps keep the fan accelerates cycling continuously up to 100% and down to a lower speed, as often happens with factory fan speed profiles. A good cooler and a profile of fan speed should keep the processor under the temp that requires 100% fan speed.

  "I removed one of my RAM sticks and it seems to solve my problems, I want a little my 8 gigs of RAM.

  Have you run memtest on the sticks individually to determine if one is the culprit? Maybe the one you

  deleted?

  Are the two poles of a corresponding factory kit, or did you just recently installed the second stick?

  If the later, make them two sticks have exactly the same features?

  Have you changed your RAM settings in the BIOS, or through a program of OC'ing?

  -You can also try to use the other pair of RAM slots to check if one of the slots that you are currently using is failing.

  «Concerning the repair of the configuration of starting windows...» »

  Yes, just to pass on what little I've read on this particular file and the error. It's probably not

  the source in this case, but it's patches that we do not try may come back on us.  ;)

  Boot sectors become corrupted for various reasons. Imaging of your operating system to a new HARD drive,

  or reinstall Windows are just two examples.

  .

• My iPhone 6s unexpectedly shuts down

  My 6s iPhone turns off automatically as if it is running out of battery, but when I connect it to the wall charger, I see that the battery has more than 50% of charge. It happened twice in the last ten days. One had the same problem? TKS.

  Fireman53214 wrote:

  My 6s iPhone turns off automatically as if it is running out of battery, but when I connect it to the wall charger, I see that the battery has more than 50% of charge. It happened twice in the last ten days. One had the same problem? TKS.

  Have you noticed all the other details that are specific to these 2 incidents in the last 10 days? Is your camera well warm when he died?

  http://www.apple.com/batteries/maximizing-performance/ -

  "Your device is designed to perform well in a wide range of ambient temperatures, with 62 ° to 72 ° F (16 ° to 22 ° C) in the area of ideal comfort. It is particularly important not expose your device to ambient temperatures above 95 ° F (35 ° C), which can damage the battery capacity. In other words, your battery will not power your device as long on a given load. Charge the unit at high ambient temperatures can damage it more. Even storing a battery in a hot environment can damage it irreversibly. When you use your device in a very cold environment, you may notice a decrease in battery life, but this is temporary. When the battery temperature returns to its normal operating range, its performance will return to normal as well. »

• Before I float test this thing, all hope for my kernel_task fly?

  I'm at my wit's end. I asked this question before but I had a temporary improvement, but those days are gone.

  I ended up having my machine to grind to a halt when I have any kind of video running, either with EyeTV VLC with kernel_task showing 500 + % CPU utilization (on a side note, someone could explain to me how it works?). Therefore, the video starts stuttering and gets very bad. He made sure that I can't really watch anything on this machine and I'm ready to throw it into the Hudson River.

  Usually it will work correctly for a period of time, in minutes, hours, but then once it starts to get carried away, he castigated for hours, even when all applications are closed.

  Yet once, I ran EtreCheck while this thing has been stolen, what I have here. I haven't run as administrator then if I need to re - run as admin please let me know.

  I am also including a list of crazy activity monitor process screen Cap.

  Any help is always greatly appreciated!

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-07 14:30:36

  Download EtreCheck from https://etrecheck.com

  Duration 12:20

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (retina, 15 inches, beginning 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.7 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 107

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Cinema HD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since the start time: about 6 days

  Disc information: ⓘ

  APPLE SSD SD512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD of B1 (disc 1) /: 498,54 (Go 56,02 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 498.90 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  VIA Labs, Inc..          Hub 1 TB USB3.0

  VIA Labs, Inc..          Hub 1 TB USB3.0

  VIA Labs, Inc..          Hub 1 TB USB3.0

  JMicron Samsung P3 Portable 1 TB

  EFI (disk2s1) < not mounted >: 210 MB

  Boot OS X (disk2s3) < not mounted >: 134 MB

  Disk backup disk (DIS3) backup / Volumes / of the B1 B1: 999,49 go-go (236,30 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.85 Go online

  Reader SuperDrive for MacBook Air Apple Inc..

  VIA Labs, Inc..          USB 2.0 hub

  VIA Labs, Inc..          USB 2.0 hub

  VIA Labs, Inc..          USB 2.0 hub

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  EPSON EPSON scanner

  Hewlett-Packard HP LaserJet 1022

  Elgato EyeTV HD

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt of Apple Inc. to Gigabit Ethernet Adapter

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  com.Citrix.kext.gusb [no charge] (1.0 - 2016-06-03) [Support]

  / System/Library/Extensions

  com.elgato.driver.DontMatchAfaTech [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchCinergy450 [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchCinergyXS [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchEmpia [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchVoyager [no charge] (1.1 - 2016-06-03) [Support]

  [no charge] tl.uds.netusb.controller (1.0.0d1 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  com.apple.FolderActionsDispatcher.plist [failure]

  [loaded] 8 tasks Apple

  [loading] 146 tasks Apple

  [operation] 81 tasks Apple

  [killed] 2 tasks Apple

  2 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 46 tasks Apple

  [loading] 148 tasks Apple

  [operation] 93 tasks Apple

  [killed] 4 tasks Apple

  4 processes killed due to lack of RAM

  Launch officers: ⓘ

  [loading] com.citrix.AuthManager_Mac.plist (2016-01-26) [Support]

  [operation] com.citrix.ReceiverHelper.plist (2016-01-26) [Support]

  [operation] com.citrix.ServiceRecords.plist (2016-01-26) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]

  [loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]

  [loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]

  [market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]

  [loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [loading] com.disconnect.networklistener.plist (2015-05-31) [Support]

  [operation] com.elgato.EyeConnect.plist (2014-02-11) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-02-27) [Support]

  [loading] com.omnigroup.OmniSoftwareUpdate.OSUInstallerPrivilegedHelper.6.plist (2016-04-14) [Support]

  [loading] com.skype.skypeinstaller.plist (2016-04-17) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2015-07-21) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (04 / 04/2016) [Support]

  [operation] com.pia.pia_manager.plist (2016-02-21) [Support]

  Items in user login: ⓘ

  Quicksilver application (/ Applications/Quicksilver.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  EyeTV Helper Application (/ Library/Application Support/EyeTV/EyeTV Helper.app)

  ScanSnap Manager Application (/ Applications/ScanSnap/ScanSnap Manager.app)

  Disconnect the Desktop Application (/ Applications/disconnect Desktop.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] 2BUA8C4S2C.com.agilebits.onepassword4 - helper

  [ongoing] com.blacktree.Quicksilver.250592

  [ongoing] com.Elgato.EyeTV.48032

  [ongoing] com.Elgato.eyetvhelper.86432

  com.flexibits.fantastical2.Mac.Launcher [loading]

  [ongoing] jp.co.pfu.ScanSnap.V10L10.63072

  [ongoing] org.videolan.VLC.64992

  [loading] 407 tasks Apple

  [operation] 213 tasks Apple

  [killed] 5 tasks of Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-16) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-05-17)

  CitrixICAClientPlugIn: 12.1.100 - SDK 10.10 (2016-01-26) [Support]

  Web of Google Earth plugin: 7.1 (2016-02-27) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-03-08) [Support]

  Safari extensions: ⓘ

  1Password - AgileBits - https://agilebits.com/onepassword (2016-05-25)

  StartPage HTTPS - Surfboard B.V. - https://startpage.com (2016-02-27)

  Unplug Private Search - Eason Goodale - https://disconnect.me/search (2016-03-19)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-05) [Support]

  GPGPreferences (2016-02-27) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD B1: disk size: 498,54 GB disc used: 442,52 GB

  Destinations:

  B1 backup disk [Local]

  Total size: 999,49 GB

  Total number of backups: 44

  An older backup: 08/01/16, 22:48

  Last backup: 07/06/16, 13:30

  Backup disk size: too small

  999,49 GB backup size < (disc 442,52 GB X 3)

  Top of page process CPU: ⓘ

  508% kernel_task

  84% EyeTV

  49% Elgato H.264 Decoder

  49% uTorrent

  22% WindowServer

  Top of page process of memory: ⓘ

  3.31 GB com.apple.WebKit.WebContent (12)

  1.43 GB kernel_task

  508 MB softwareupdated

  EyeTV 295 MB

  262 MB Mail

  Virtual memory information: ⓘ

  2.44 GB of free RAM

  2 pm used GB RAM (6,49 GB being cached)

  37 MB used Swap

  Diagnostic information: ⓘ

  Standard users cannot read/Library/Logs/DiagnosticReports.

  Run as an administrator account to view more information.

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth equipment tests, an appointment 'Genius' on an Apple Store, or go to another authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  If you do not know what software could contribute to the problem, please hold down the option key and select

  Information system...

  in the Apple menu. The system information window opens. Select

  The software extensions ▹

  in the menu on the left. After a delay of a minute or two, a list of all installed kernel extensions should appear in the upper right window.

  In the extensions list, click the results achieved since twice column header to sort by source, with Apple down. At or near the top, you may see a few third-party extensions. Choose an answer and the information on it, including the location, will be displayed in the lower pane right window. What do you see?

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• My laptop is plugged in but not charging

  My phone displays 'sometimes' that it does not load even if the power is connected.

  I called HP Tech Support twice.  Each time, they asked me to update the BIOS and firmware

  before performing the battery test (both at startup and using HP diagnostic S/W).  The test always

  said that the battery is OK.  I can run the laptop without battery installed without any problem, which

  probably does the charger.

  This problem comes and goes.  HP is unwilling to do anything until the problem can be clearly

  identified.  My warranty is about to expire (in 3 days), and I'm afraid that this problem won't get

  resolved before this date.  Could someone help me with this problem?

  Thank you.

  JC

  Thank you billtorbitt. Without knowing more about your question, here's a myriad of battery related documents. Go through all and let me know what you have determined is causing the problem. The first document was probably the most relevant troubleshooting if your battery seems to be not charging.
  
  
  
  Battery not power Notebook or hold a Charge:
  
  http://support.HP.com/us-en/document/c00259897
  
  
  
  Battery charge delayed when you use the laptop in a high ambient temperature:
  
  http://support.HP.com/us-en/document/c02535922
  
  
  
  Battery only will not load when you use an adapter of tension with the power adapter:
  
  http://support.HP.com/us-en/document/c00274778
  
  
  
  Battery indicator light turns on and off while battery is charge:
  
  http://support.HP.com/us-en/document/c00287805

• New iPhone 6s dies in the 'cold '.

  My iPhone 6s was to die often lately. Last night it was 0 degrees celsius or 32 degrees fahrenheit and it happened again. He actually did at temperatures as high as 5 degrees celsius. I never had this problem with my iPhone 5 that I used before the 6s and I used it at lower temperature (-10 /-15) and much more frequently too.

  Took note of that Apple and is there anything put in place that this question is still attached?

  Thank you

  Here is what Apple has said about it:

  

  Your device is designed to perform well in a wide range of ambient temperatures, with 62 ° to 72 ° F (16 ° to 22 ° C) in the area of ideal comfort. It is particularly important not expose your device to ambient temperatures above 95 ° F (35 ° C), which can damage the battery capacity. In other words, your battery will not power your device as long on a given load. Charge the unit at high ambient temperatures can damage it more. Even storing a battery in a hot environment can damage it irreversibly. When you use your device in a very cold environment, you may notice a decrease in battery life, but this is temporary. When the battery temperature returns to its normal operating range, its performance will return to normal as well.

  

  

  iPhone, iPad, iPod and Apple Watch work better at 32 ° to 95 ° F (0 ° to 35 ° C) room temperature. Storage temperature:-4 ° to 113 ° F (-20 ° to 45 ° C).

  copied from: http://www.apple.com/batteries/maximizing-performance/#general

• Fan noisy and slow speed for the Macbook Air with 10.11.4

  I hope you can help me.

  I upgraded 10.11.4 on my Macbook Air a couple of days. It is a model of 2013 Mid, 1.7 Ghz Core i7, 8 GB of RAM.

  I don't know exactly what my last update was - but was El Capitan any.

  I tried LANDAU and SMC resets.

  Previously, she has chugged along fine. The fan was quiet most of the time - only hit on when I used Lightroom.

  Now, the fan kicks on regularly, most of the time actually. And it's MUCH slower. Very lag sometimes when you type in Wordpress, for example. And lightroom is much slower. Also, when I use FaceTime, video often turns itself on and off--with a message informing me that it will resume when the computer cools down. Yet the back of the computer does feel not hot at all.

  I tried page of Chrome in Safari. Doesn't seem to help much.

  I am currently traveling to the Peru and did not my hard drive with my last backup, Time Machine, by hand, so as I understand it, I can't go back to a previous update.

  The Kernal task often seems to have a very high CPU %: 250 or.

  Right now, I'm trying to download the Combo, I read that this can sometimes fix glitches.

  Any help is greatly appreciated!

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth material test, an appointment of 'Genius' to an Apple Store, or go to an other authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• iPhone 6 stops at a cool temperature

  I started to have the question last winter. When I'm out in the cold, my phone suddenly stops any percentage of the battery is on the left. Even in the milder climate (5 ° C in March to the Canada) my iPhone 6 won't last a House of travel bike 20 minutes while in the inside pocket of my jacket. Once I go home, I can turn right back and it will support the rest of the day on the same charge.

  So, it seems that the battery cannot provide the necessary power for the phone to operate in temperatures. But count me can last all day when I am on the inside. Everyone knows this? And a replacement of the battery could solve this problem?

  Have you already checked this?

  

  Your device is designed to perform well in a wide range of ambient temperatures, with 62 ° to 72 ° F (16 ° to 22 ° C) in the area of ideal comfort. It is particularly important not expose your device to ambient temperatures above 95 ° F (35 ° C), which can damage the battery capacity. In other words, your battery will not power your device as long on a given load. Charge the unit at high ambient temperatures can damage it more. Even storing a battery in a hot environment can damage it irreversibly. When you use your device in a very cold environment, you may notice a decrease in battery life, but this is temporary. When the battery temperature returns to its normal operating range, its performance will return to normal as well.

  copied from: https://www.apple.com/batteries/maximizing-performance/

• U3011, gray spot

  A task gray / stripe appeared recently on my U3011.  Unfortunately for me, it bought 3.5 years ago and therefore more under warranty.  Anyone know if this a repairable defect?  Considering how much these things cost, so my only option is to ignore it or buy a new monitor, it is unlikely that I will buy Dell again. Here is the picture of one of the self test screens.  Light blue (sky, for example), it is unfortunately very sensitive. I tried contacted Dell support, and the guy that I was talking to was convinced that it was dead, pixels even if it does not show with a bright white background.  Any help would be appreciated.  Thank you.

  

  This is the default of yogore / mura. All we would do is Exchange it under the purchased warranty period.

  Brown spots or stains may appear occasionally on some LCDs. This clouding phenomenon is recognized in the industry as yogore or mura. A Japanese term for "irregularities." This term is used to describe a low, irregular contrast or a region which causes the uniformity uneven screen under certain conditions. Mura is a result of the deterioration of the layer of consistency of the liquid crystal (LC). most often caused by the effect in the long term under a high ambient temperature. It is a phenomenon of great industry and mura is not repairable. Mura has been around since the introduction of LCD technology. LCD screens are getting bigger, touch monitors generally work 24/7 and we enjoy more content now in low light conditions. All of these factors adds the possibility of mura affecting screens. Generally, the appearance of mura can be minimized by the following methods:
  * Lower the brightness of the backlight
  * Use a screen saver
  Reduce the ambient temperature around the unit

• HP Pavilion G6 2149tx battery or the load program

  Greetings!

  Guyz yesterday I was using my laptop support, once completed it disconnected from the load after a few hours of work when I plugged it again say "plugged in, do not load", but after 1-2 minutes later, I saw the icon it say of "plugged in, charging»

  Can you please tell me what is it!

  -What is the charger and the battery safe?

  Thank you

  Hi Jess - ul - Abdin, welcome to the Forums of HP. I understand that your notebook does not immediately load after the insertion of the adapter. Sounds as if it was a behavior normal, as shown in this document explaining a precaution security put in place in your laptop: battery charge delayed when operating in high ambient temperatures laptop

  Let me know if it helps.

• Power edge T410 - ERROR 1 [MS]

  Hi all

  I have a problem with a computer model "Power edge T410.

  We noticed an intense and continuous cooling fan activity.

  The small appears:

  <>

  System Board ambient temp: temperature of the system, warning event card probe. >>

  Does that mean exactly? What we can do to fix it?

  Thanks in advance

  Concerning

  Buongiorno,

  MI manda copia dei registrati newspapers?

  Dal server administrator: clicchi knew System sulla sinistra, poi su newspapers nella cornice Central, quindi su export logs

  MI servirebbe anche di sapere quali siano the temperature register:

  System-->--> temperatures main system chassis

  Speaking saluti

  Manual

• UTL_FILE import csv file

  Hello

  I am writing a procdeure use the utl_file.get_line to read csv files and then proceed to a treatment before inserting data into a table.

  The csv file has four columns. The third column data have a newline when reading the file I get an error value.

  The procedure cannot detect the length of the 3rd field, it cannot detect the 3rd decimal point because this column has a line break.

  To differentiate the length of the column between each ',' part of the code I use is below.

  BEGIN

  Starts: = UTL_FILE. FOPEN ("D:\TEST','CT. CSV', 'R', 32765);

  loop

  UTL_FILE. GET_LINE (starts, input_String);

  delChar varchar2 (1): = ', ';

  -first field
  v_Pos: = instr (input_String, delChar, 1, 1);
  v_lenString: = v_Pos - 1;
  v_compname: = substr(input_String,1,v_lenString);

  v_startPos: = v_Pos + 1;

  -This will get the second field
  v_Pos: = instr (input_String, delChar, 1, 2);
  v_lenString: = v_Pos - v_startPos;
  v_comptype: = substr (input_String, v_startPos, v_lenString);
  
  v_startPos: = v_Pos + 1;
  
  -3rd field
  v_Pos: = instr (input_String, delChar, 1, 3);

  v_lenString: = v_Pos - v_startPos;
  v_notes: = substr (input_String, v_startPos, v_lenString);

  
  v_startPos: = v_Pos + 1;
  -the last land - there is no delimiter for last field
  v_Pos: = length (input_String) + 1;
  v_lenString: = v_Pos - v_startPos;
  v_comptypemodel: = substr (input_String, v_StartPos, v_lenString);

  My csv file looks like this when it is open with notepad ++,.

  CA COOLER VSM 89 E, MSM 89 E, 'EL. AC-MOTOR UNITS.

  ABB WADA 500L2L BSMH 11000V/1720KW/105 A/3584 RPM 60 HZ S1
  COOLING WATER FLOW 12.3 m3/h
  AMBIENT TEMP. 45 DEG", 123421
  ABB WADA 500L2L BSMH 11000, V/1720KW/105 A/3584 RPM 60 HZ, EL S1. AC-MOTOR UNITS. ABB WADA, EL. AC-MOTOR UNITS.

  The value of v_pos = 0 and v_lenSting =-30 for the 3rd field.

  Hope someone can point me in the right direction on how to solve this problem.

  Thanks in advance.

  OK, my apologies, I don't see the real problem you're trying to solve in the first post (it helps us if you format code / data using a font courier etc. in the Advanced Editor)

  Here is the response from Tom Kyte...

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:2818047000346046084

  While there is an option in 11 GR 2 from an external preprocessor allows to process the file (which can be useful for files of decompression etc - see pretreatment: preprocess external Tables) it will probably not help in your case, because you will not easily be able to determine what 'new line' characters to substitute something else for you to make the difference when loading the data.

  Creating the CSV data can be modified to replace the line break characters in text by something else?  or use a different delimiter to the end of line?  That would be the ideal solution.

• DVD burning performance

  I own a Dell Inspiron 1520 laptop. The original operating system is Windows Vista Business Edition. I am faced with the question of the Performance of DVD burning, before I burn a DVD on 4.2 GB of data, it uses only about 20-25 minutes to complete the process.

  I'm going down the operating system, the burning process is taking time about 1 hour to complete the process of engraving on xGB 3. data and the laptop now high abnormal temp. Do not miss during the downgrade of the system? Please help solve the problem as soon as POSSIBLE.