High CPU on Win10 use

Similar Questions

• Windows Explorer high cpu use jn 9

  Computer freezes & I have to restart my computer

  Hello

  (1) do you have made no changes before this problem?
  (2) you receive an error message then the closure of the computer?
   
  Follow the steps from the links below and check if it helps.
   
  Method 1: You can check if the Windows Task Manager also shows high CPU usage. To do this, follow the steps mentioned in the link.
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-details-about-your-computers-performance-using-Task-Manager

   

  Method 2: Follow the instructions in Internet Explorer 9 from the link below and check if it makes a difference.
  Use the software instead of rendering GPU rendering
  http://support.Microsoft.com/kb/2398082

   
  Method 3: Run the FIXIT from the link below, and if that helps.
  Solve Internet Explorer add-on problems when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
   
  Hope this information helps.
   
   

• HP mini5102 interruption using high CPU after sleep / resume

  I have the same problem described recently (without solution) on the Forum of Support HP Business. After resume from sleep, 5102 HPmini consumes constantly about 30% of the capacity of the CPU even with the system at idle. Sunny (0-3% CPU use at idle) before going to sleep. As Roderick Laird (copied below) I've already got rid of wireless assistant that caused a different problem of high CPU usage (100% CPU use even before you sleep / resume, now fixed by an update of the version unless served for those who want to keep the wireless assistant).

  Consumption of futile processor by 30% after standby/sleep is due to material interruptions (revealed by Sysinternals Process Explorer). I understand that may be due to problems such as several drivers attempting to control a device (for example, after a faulty update). But I have no idea how find the offending device or drivers.

  My guess is that many owners of this model simply did not notice the problem and they areassuming the poor performance is due to the atom processor netbook. You must use Task Manager or performance monitor to view CPU usage high, and process Explorer to find it hardware interrupts.

  If anyone has found the cause / solution?

  HP, help to resolve this issue please--nobody wants netbooks HP fall into the category "do not buy" due to persistent problems with the futile CPU usage. The HP mini 5102 is the flagship model!

  Ref:

  "Author subject: HP mini5102 interruption high CPU usage after standby Roderick Laird 24 March 2010 04:03:03 GMT - I see of other HP5102 users having problems with high use of the processor of the Wireless Wizard operation amok; I avoided this by disabling the corresponding services. But one problem remains. The system works beautifully/effectively from a cold start. However, if I go back I think that interruptions are consumes about 35% of the cycles CPU. Not something that I want to pass battery on. I made sure that all the drivers are the latest versions according to the HP support site. I also tried disabling the obvious drivers that might be wrong (wireless, ethernet, audio, non-touchpad mouse)... »

  Update the Intel AHCI 9.6.4.1002 driver (iastor.sys) removes the futile CPU usage after sleep from 30% to 20%. This is not in the drivers of HP, but is available at Intel. Subsequently the chipset driver updates might solve the problem. In the meantime:

  Disabling in BIOS Drivelock completely eliminates the problem!

  Apparently users who want a computer that is useful after sleep / summary to know somehow ignore the advice of stern of HP in the BIOS that Drivelock is recommended for safety.

  It cost a lot of time to resolve, with no whatesover help to be published by HP. My consolation is that by systematically eliminating all the bloatware and other services-waste of unused resources, pilots and scheduled tasks automatically loaded on the system (while trying to find the cause of the CPU / interrupt use) I now have a mini 5102 (SSD) that:

  * Cold boots Win 7 Pro 32 in less than 30 seconds (including wireless access)

  * Stops in less than 8 seconds

  * Beds / back in 1-2 seconds

  * Consumes less than 600 MB of RAM at idle

• Norton is the internet Explorer display high cpu use

  Norton 360 is showing a high utilization of the processor with internet explore.  What does that mean?  How to fix (if necessary)?

  You must request the help of Norton Support.

  You could start here: http://community.norton.com/t5/Norton-360/Constant-High-CPU-usage/td-p/473508

  If you are unhappy with your subscription or Norton 360 are subject to deadline you could follow the advice of Tommy Stanley and try another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• High CPU use 100%

  Hello

  High CPU usage 100% on 32-bit windows 2003 std

  This a virtual machine after 2 processors and 4 GB of ram.

  Please suggest how to solve

  Hello

  It always depended on your edition of Windows:

  Operating system	Number of processors	Physical RAM
  Microsoft Windows Server 2003, Standard Edition	4	4 gigabytes (GB)
  Microsoft Windows Server 2003, Standard x 64 Edition	4	32 GB
  Microsoft Windows Server 2003, Enterprise Edition	8	64 GB
  Microsoft Windows Server 2003, Enterprise Edition x 64	8	1 terabyte
  Microsoft Windows Server 2003, Datacenter Edition	32	64 GB
  Microsoft Windows Server 2003, Datacenter x 64 edition	64	1 terabyte

• High CPU consumption (always between 12 and 30%)

  I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point where I have to kill Firefox to use other applications.

  I have a new Mac mini with fast CPU and 8 GB of RAM.

  I tried to reinstall and also to disable the 4 Add-ons I have installed. After a new installation and all 4 disabled add-ons, I see exactly the same problem even with one tab open to google.com

  Any help from the community is very much appreciated.

  Thanks in advance...

  I've upgraded to Firefox 10 and this issue is now resolved.

• High CPU after 10.11.3 at 10.11.4 upgrade

  Use El Capitan successfully for several months, 10.11.1 to 10.11.3 migration. However, the upgrade to 10.11.4 led to relatively stable high CPU.

  In particular, I see process launchd (about 75%), UserEventAgent (70%) and mds_stores (30%) CPU consumption at that rate there essentially all the time, the % overall slowed down when do nothig is about 45% - therefore on an end of 2014 retina iMac 27 inches with Fusion drive. Despite this, everything works still with reasonable performance, probably because there is still spare CPU capacity.

  Looking at the Console log, I see a lot of

  29/03/2016 18:17:01.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:18:02.001 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:19:03.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:20:04.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  It's be connected at intervals of a minute or so, although I don't see any referenced messages.

  Removed some of the programs began and eliminated some of the agents launched (I think) and also re-installed from the recovery partition, but the problem is still there.

  Someone at - it watched questions along these lines?

  Would appreciate any suggestions.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Tecra M2 - stop hard on high CPU (turns off with no BSOD)

  Experienced stops consistent when the CPU is running at full during a little while.
  -J' mean 'stops' complete power cut with no blue screen of death where all is lost and the computer must be restarted manually.
  -by "high CPU", I mean when the processor locks to full use such that when you insert a column in a big Excel sheet with errors or if you want a large number of files and you open a video from the network or when you run a registry scan and antivirus analysis at the same time.

  The problem took place regularly for a few months and I can now make a case with greater predictability. Using the hardware monitor suite 'Everest', it seems that the problem occurs when the temperature of the CPU is located at 99 for more than a minute or more.

  This happens with some, but never when batteries run - then attempts to force the error, it will not be stopped if the power cable is released just before the drop point.

  In the cases of the problem, it seems to be a small error message appearing only a fraction of a second before the death of the computer.

  Each reference forum and help that I read would suggest the problem is related material and that the chip or the motherboard is overheating and need replacement. While the laptop is almost 18 months old, I bought a new ' everything except the screen and HDD "earlier this year, and was not prepared to accept the explanation without more tests.

  Kantonix Linux works very well and the CD starts seems to tax the processor as much as the same events that kill for me under XP.

  A few weeks back, I installed Windows XP on a second HARD drive in the Bay of hotswappable and noted the installation seems to work pretty hot computer and he died during the process. It has experienced no difficulties for while but, a few days after moving the HARD drive reinstalled in the primary position and after you have reinstalled a lot a lot of applications, the error started happening again.

  Last night I caught a few fractions of a second before the death, the pulling power and stop the process and allow me to see the error message (as mentioned above):

  -first message came from "TOSHIBA Power Saver" saying "a fatal error occurred at x 06" (not sure about the last bit) ".

  -second message was "THotkey.exe' saying 'could not load powrprof.dll.

  -monitoring of several hundred cases of the second message.

  Because of the error messages, I was not able to get a print screen.

  Solutions or even on ideas that would be very appreciated!

  Post edited by: DC-financial

  Hello

  According to your explanations and the information in your ad, I think that the problem is related to the software.
  You wrote something about energy saving. This Toshiba utility controls the speed of the CPU and the use of cooling modules.
  I think that this request could be responsible by the judgments. Try reinstalling this utility.
  In addition, check the configuration of the unique power plans. If you work only with battery energy saver using another mode of power supply as working on AC.
  I think you could check these consumption patterns and configure it.

  Verification of the cooling module is also not a bad idea. Maybe fans cannot work properly because of the dust and debris inside the books.
  I use the vacuum cleaner to clean the fans. CA? s an easy way to make it free of dust.
  But if you get it, you must be careful.

• Qosmio F60 - alert constantly high CPU usage

  Hello

  About 12 months ago, I bought a Toshiba Qosmio F60 computer laptop 6 GB.

  When exploring using games, facebook etc, I am constantly alert of my Norton informing that there is high CPU usage.

  I have asked around locally and advised to delete Norton because this may be the problem. I'm not eager to do what my subscription is still valid.

  I also learned the other day that this is a common problem with laptops Toshiba using 'Explorer' and that I should use "Mozilla Firefox" instead which would correct the problem.

  I am trying to arrange this.

  Can you please indicate if it is a regular problem with Toshiba laptops and reviewing the options above to try to address this problem.

  It doesn't really seem to my computer, it goes more slowly and when in the Manager tasks, it is constantly fluctuating between 5 and 35%

  I look forward for your reply.

  Thank you

  Melissa

  Hello

  This isn't a problem laptop buddy
  Norton AntiVirus is a good antivirus program, but it uses a lot of resources and my experience locks the CPU.

  I removed this antivirus software and now I m using the avast and Avira Antivir free Antivirus software. Both are freeware software.

  But I still use Internet Explorer. Of course, I also installed the firefox and chrome. All these three browsers are great.

• opendirectoryd process has high CPU

  The opendirectoryd process is very high CPU. I have tried the method that Apple Support Doc says. But this isn't the solution.

  

  I also try to close port 22. No effect.

  I don't know why this problem occurs. The only solution is to restart the computer.

  I use MacBook Pro early 2011, OS X 10.11.3

• DAQmx read results 2 ms/s in high CPU usage

  I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

  I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

  (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

  (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

  Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

  I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

  (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

  (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

  (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

  • @1 channel, it happened between 950 to 970 k
  • @2 channels, it happened between 470 to 480 k
  • @4 channels, it happened between 230 to 240 k,.
  • @8 channels, it happened between 120 to 130 k.

  This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

  My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

  For your information, I have attached the benchmarking software.

  Thank you!

  Donghui Yin

  I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

• A process called "svctimesag.exe" consumes high CPU on the Production Server.

  OT: svctimesag.

  Hi team,

  In one of our Production Server is a process called "svctimesag.exe" using high CPU. This problem has been detected the day before.

  For immediate solution, we killed the process, but it did not help, then you need to restart our server.

  In the past 24 hours this process has shoot to the top of the CPU twice and you need to restart the server with force.

  Also searched the Internet but found no information. The location of the file on the server is C:\Program Files (x86)\Products\svctimesag\svctimesag.exe

  We organize engine on the server management application. We also opened the case with them to know the process.

  If any user face any problem with that part of process please your valuable troubleshooting strike.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

  I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

  After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

  I tried the following:

  -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

  -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

  -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

  -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

  -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

  Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

  -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

  I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

  In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

  I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

  We have done several updates, so I know not that exactly solved the problem, but it is those:

  -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

  -New Intel chipset driver: 1.20 (sp69575.exe)

  -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

  -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

  I hope this helps other people with the same problem.

  Thanks to the HP Support team for their help with this problem!

  Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.