HP mini5102 interruption using high CPU after sleep / resume

Similar Questions

• Safari uses excessive CPU after upgrade to Sierra on Macbook Pro

  Hello

  After the upgrade to Sierra, I noticed that Safari uses a lot of CPU, causing the fans to be very strong. I tried almost everything that I could find on this issue, including using Firefox, but nothing has changed. Do I really need to reinstall everything?

  

  After digging deeper, I found a solution. It was Trusteer report I had installed for safer online banking. This is the thread that helped meSafari 10 high CPU usage

• High CPU after 10.11.3 at 10.11.4 upgrade

  Use El Capitan successfully for several months, 10.11.1 to 10.11.3 migration. However, the upgrade to 10.11.4 led to relatively stable high CPU.

  In particular, I see process launchd (about 75%), UserEventAgent (70%) and mds_stores (30%) CPU consumption at that rate there essentially all the time, the % overall slowed down when do nothig is about 45% - therefore on an end of 2014 retina iMac 27 inches with Fusion drive. Despite this, everything works still with reasonable performance, probably because there is still spare CPU capacity.

  Looking at the Console log, I see a lot of

  29/03/2016 18:17:01.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:18:02.001 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:19:03.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:20:04.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  It's be connected at intervals of a minute or so, although I don't see any referenced messages.

  Removed some of the programs began and eliminated some of the agents launched (I think) and also re-installed from the recovery partition, but the problem is still there.

  Someone at - it watched questions along these lines?

  Would appreciate any suggestions.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• Use high processor after installing XP SP3.

  Original title: XP and Service Pack 3

  After you install service pack 3, there is demand of 100 percent on the CPU and system idle is at 99 percent. Service pack Uninstall and re-installation of service pack 2 resolves the memory leak? Computer slows down the equivalent of a pentium 75.

  This seems to be the norm with users of AMD in various forums on the net.

  Closed all programs, suspended, startup programs and of the cpu is at 100%. I even tried a reformat and a clean install to resolve possible conflicts, software and hardware, unplug everything except the local drive / logic.

  It is so hard to install Windows 8, and solve it can put an end to a mass of complaints of installation failures that many are asked to cover. Which I am part.

  I'm under MB, AMD 1.8, 3000 + Ram / 2 concerts. A basement and old configuration, but this problem is not limited to the mine, but dual and quads as well. Anyone have any ideas?

  After you install service pack 3, there is demand of 100 percent on the CPU and system idle is at 99 percent.

  This sentence is a virtual contradiction.  You seem to misunderstand the meaning of "The system idle process."  Idle = not active or in use.

  If the System Idle process is at 99%, so there is a demand of 1% on the CPU.

  In fact, no..  :-)
  I saw the performance of the Task Manager tab shows 100% CPU activity. And everything grinds to stop. Then I go to the processes tab and no process is proved be using these cycles. And Yes, SystemIdleProcess is wrong showing that 99%.
  It is almost always the result of the presence of malware (which is intended to be as invisible as possible). Of course, it could also be the result of an update failed due the presence of greedy of security software, as you reminded me in your message. :-)

• 11.0.10 software Adobe reader uses maximum CPU after the closure of Windows 8

  Hello

  Please advice how to solve the issue of maximum use of the CPU, Adobe Reader, after closing it on 64-bit Windows 8.

  Thank you.

  Try to disable the Safe_mode in Adobe Reader [Edit |] Preferences | (Improved) security].

• Use high CPU by AtService.exe

  Aloha, I have a Mobile HP EliteBook 8530w workstation. I had very slow startup problems. I have improved a certain drivers by Driver Detective program recommendations. Starting time is great now. However, I now have this file AtService.exe constantly using 50% of my CPU makes lazy from time to time my computer. Apparently, it's something to do with figerprint sensor that I do not yet. I found the file but am denied access when I try to remove it. I wonder if I can get rid of the entire record of fingerprint sensor without causing problems? Help, please! Thank you

  reefguy

  Your problem is caused by the Authentec software that is loaded by the fingerprint sensor.

  Try to download and update HP ProtectTools Security Manager Suite of here.

• Iexplore.exe - USE HIGH CPU - 50% (dual processor) - Windows Vista Home Premium

  Help, please!

  My HP dv9000 is slow.  PLEASE LET ME KNOW WHAT INFO YOU NEED ME!  In the Task Manager, under the terms of 'process', it indicates that there are FOUR INSTANCES of internet explorer running, but I only have one window open (with a tab).  I hear my hard drive constantly running and it drives me crazy (and make me cry for my poor computer).  The 4 iexplore.exe (IE8) use respectively 110 000 - 82 300-78 000 - and 8000 K.  Is this normal?

  I don't know if we are more concerned by the "CPU" column or in the column "memory (private beach).  In the CPU column, HP Digital Imaging Monitor uses 50.  Is this normal?

  Please, I just want my computer to be able to relax.  I'm afraid it's going to explode (not literally, but that's what it looks like!).

  Thank you
  Elizabeth

  Hello Elizzee,

  Thank you for posting.  It seems you might have a form of hard-ware on your computer.  I have a useful link to a scan of the free system for viruses, malware and spyware listed below.

  http://OneCare.live.com/site/en-us/default.htm

  You can also do a full scan with your antivirus program on your computer installing later.

  Please let me know if this has been helpful for you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Use high CPU; Could not find the problem.

  Hello. This is my first posting on this Web site. I came across a problem last night after rebooting my computer, where a game I start or even a little intensive, I opened, my CPU usage increases by 14% to ~ 100% instantly. I tried this on many programs such as Minecraft, all games on Steam, Firefall and even some of Malwarebytes when I scan if a virus is the cause. None of my anti-virus software found a virus, so I'm suspicious as to what may be the problem. Here are my computer specs:

  Processor: Intel Core i5-3550 CPU @ 3.30 GHz (4 CPUs), ~3.3GHz
  Graphics card: NVIDIA GeForce 8800 GT
  Memory: RAM 8192MB
  OS: Windows 7

  Ask more if necessary. Thank you.

  NA

  In this trace Skype * by far) was the most important.  I would try to re - install

  

• Need help with the fix KB 900243... for use high CPU with file W3WP.exe

  SBS 2003 Enterprise.

  This hotfix contains two files:

  1 WIndowsServer2003-KB900243 - x 86 - enu.exe
  2 WIndowsServer2003-KB900243 - x 86-symbols - enu.exe
  Which of them install?  Or if the two, what order.
  Thank you.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• A process called "svctimesag.exe" consumes high CPU on the Production Server.

  OT: svctimesag.

  Hi team,

  In one of our Production Server is a process called "svctimesag.exe" using high CPU. This problem has been detected the day before.

  For immediate solution, we killed the process, but it did not help, then you need to restart our server.

  In the past 24 hours this process has shoot to the top of the CPU twice and you need to restart the server with force.

  Also searched the Internet but found no information. The location of the file on the server is C:\Program Files (x86)\Products\svctimesag\svctimesag.exe

  We organize engine on the server management application. We also opened the case with them to know the process.

  If any user face any problem with that part of process please your valuable troubleshooting strike.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• After sleeping cpu mode goes higher...

  

  These screenshots are taken after waking from sleep mode

  

  Hello Christine,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with high CPU usage after the wake up the computer from sleep mode. Please follow the following suggestions to solve the problem.

  You can try to modify the diet plan and see if that helps. You can create and customize your own power plans.

  1. Open Power Options by dragging in the edge right of the screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording the power options in the search box and typing or clicking power options.

  2. Press or click create a power plan and follow the instructions.

  For more information:

  Power plans: frequently asked questions

  The problems of wake the computer from sleep mode

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Dell Latitude E7440 CPU speed capped after sleep

  My laptop Dell Latitude E7440 provided with Windows 8.1 at the time wherever I bought it. I did not notice this problem until I upgraded to Windows 10.

  Sometimes, when I put the laptop to sleep and resume at a later date, the speed of the CPU is limited to all about 0.78 GHz and switching to High Performance mode won't help. The computer becomes very slow and the only way to solve this reboot.

  I have the latest version of the BIOS installed (A15) and the other drivers are also updated.

  I've seen other threads saying that the problem is to use Dell Power companion but I do not use it. I have 2 power adapters that I use with this laptop, one of them is a Dell 90W Adapter. I'm not sure about the other that I don't have it right now, but an original came with the laptop.

  Any temporary/permanent fix for this? Thank you.

  I solved this problem. Downgrade BIOS A01 and updated step by step each single release - A01 > A02 > A03... > A15. Now, I'm on A15 BIOS and there is no problem with CPU after suspension. I7-4600u, W8.1 x 64.

• unknown material interruptions & DPC causing high CPU usage

  After having hard time find a way to solve this problem

  Please take a look at these links

  http://postimg.org/image/ynx7o0gi1/

  http://postimg.org/image/j3ptxh6dl/

  Thanks for all the entries...

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. the computer is on a domain network?
   
  These activities [interruptions and DPC] high CPU consumption may indicate a hardware problem or problems with the device driver.
   
  Method 1:
  I suggest you to update the chipset and BIOS drivers on the computer and check if it helps.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Also, try to download and install the latest chipset and BIOS drivers for the computer from the manufacturer's website.
   
  Method 2:
  I ask you to check if the problem persists after disconnecting all external devices (except keyboard and mouse).

   

  Method 3:

  Run the hardware troubleshooter and devices.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  Check if the problem occurs in the boot.

  Reference:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

   
  Also check out these links for more information:
   
  Analyzing interrupt and DPC activity
  http://TechNet.Microsoft.com/en-us/library/cc938646.aspx
   
  Follow-up of interruptions
  http://TechNet.Microsoft.com/en-us/library/cc940374.aspx
   
  Start followed by performance guide
  http://TechNet.Microsoft.com/en-us/library/dd744567 (v = ws.10) .aspx
   
  Thank you.

• High CPU on Win10 use

  I have very high CPU usage in all the browsers that I use (FF, Opera, Opera Beta and Chrome). Each page with Flash Player and each image-heavy page causes my CPU to lash out. Until my upgrade to win 10 at least my PC didn't not prevent that. Now after the upgrade I suffer from this too. I have PC freeze 3 - 4 times a week when the high CPU usage occurs. I wonder why Adobe is so silent on this very serious issue. No doubt if there was an alternative to Flash Player, they would be more willing to solve so that people don't not to choose the other.

  PS. change always activate to activate in FF did not help.

  You need to try a new profile without any addons. I suspect that one of these addons or more are in competition with other things. Add you addons back one by one until that narrow you the problem. In addition, you mentioned in you OP you have a celeron processor. I've dealt with these processors and they are a budget/low end treatment, and this could be a huge part of your question after seeing other things.

  I use ABP and don't suffer from any problem, I see it shows top sometimes, but still not really my performance in Firefox, I doubt that bookmarks are a problem. I went on this site and run the function shown in the screenshot and only maxed out at 44% cpu; However, it is an i - 7 cpu 6700 w/16BG of use mempory + 4 video BG.

  I suggest you go to google and type in "processhacker", it might give you a better breakdown on what is using what. I think that your CPU has trouble following what I suspect.

  Best regards

  Please do not forget to mark my post here useful or answered if I helped you

  Thank you