high wmpnet cpu usage

Similar Questions

• The processor high/weird CPU usage and about 20 to 25% system interruptions.

  Hello

  I use an AMD phemon IIx4 965 processor. (never had proplems with this till now.) One of its mainstays bed use ranging from 70-99% in Task Manager exercising while the other 3 are normally working / reading normal numbers. The question comes at random, but won't go away unless I restart my computer. This problem arises in a week a go, I was playing a game in steam when I noticed the drastic performance to fall and began studying. The question, something just when im not playing. I use my computer mainly on the game. The computer slows down because of this. I have no idea what the cause. Help?

  Procexp said interruptions system 20-25. According to CPU - Z and CrystaldistInfo my HARD drive temperatures are all normal, around 28 - 38 c idle.

  Reasently, I got a new case for my computer parts, I removed and passed my components of my old case to a new. I tried to be careful and I know (I know) thinki. enough computers to do this by myself. Fifi, it done once in the past. I have read the instructions and put / connected all the wires and parts according to them. The machine started normally. No problems. This could cause this problem, is a thread in the wrong place? I do not know.

  I used free versions of Windows security essentials and Spybot search and destroy, Avast kernel tdsskiller to search for viruses and malware. All this happened in own. Can he still be a virus or something?
  Used more claire Wise registry and Ccleaner but noting alarming is come to the top, (again I think.) some things Yes, but breaking the ' fix claim has pursuant button has not set a cpu problem.

  First I though its my GPU causing the problem drivers. (google said) Approximately 45 days only a go replace my old AMD for a new R280 AMD Radeon 6950. Allworked very well so far. I found that according to Unknown Device Identifier I had older drivers still on my machine. I had trouble removing the old drivers, but eventually I had to use an uninstall program display driver for getting rid of them and now I only see one set of drivers. This has not fixed the issue of the use of the cpu.

  IM lost, at the end of my skills (mainly google-fu). Can someone help me? I hope this is the right place for this post, if it isn't then I apologize.

  If you want me (hopefully) post set and whatknot please first tell what program for and where to find it.

  Card mother 790GX-G65 (MS-7576)
  CPU AMD phenom II X 4 965
  AMD Radeon R280X 3 GB DDR5 XFX video card
  BenQ E2420HD 24 "1920 x 1080 resolution 75 Hz LCD monitor
  8 GB RAM DDR3
  Series of smart Power Supply Thermaltake M85OW EU

  I've updated all the drivers on the site of manufacturers on my motherboard side touching the BIOS and embedded PIDE/SATA drivers. Updated my drivers for Audio embedded, embedded LAN Drivers, System & Chipset drivers. (smarter people said that could set).

  Until writing this no problem has arisen, all works fine now. Procexp said system interruptions are now less then 2, compared to the previous 20-25 it is a sign that the update to fix the problem. It seems that this problem corrected everything. It turns out that all i needed was updated drivers thees. Everything works fine now... for the moment at least. Live and learn.

  Thanks for the time and effort you took to look for it.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• Satellite T130-10T: high CPU usage for no apparent reason

  I have a brand new satellite T130.
  Unboxing conversion, I noticed that the CPU usage is most of the time very high, even if it has nothing (no application does not work).

  Sometimes it hits 100% and rest there for a few minutes.
  I installed the most recent BIOST I could find on the Toshiba site, but nothing changes.

  Any ideas?
  I don't like just-out-the-box-unit already causes disorders!

  Hi mate

  There are many applications that run in the background.
  Most of them is installed by Toshiba and these tools control the features of the laptop as keys FN, multi, eco button command buttons, etc.

  You can see the ruing applications in the Task Manager. There you can also see what background process requires the use of the CPU.

  Welcome them

• Excessively the CPU usage high on my Equium M70

  Hello

  Recently in the last month my summer CPU usage hit 100% when I m not running any software tax (only internet explore and windows media player).

  It is slowing down the load time and the area near the fan is hot enough.

  I have a Satellite M70-337, with a 1.7 centrino processor and now 2 GB of RAM (formerly 512 megabytes). I upgraded the ram in December and had no problems like that, now it just started happening recently, I have installed everything that would, there is no unnecessary programs running and it was after I restored my computer to factory with the startup disk settings (a month later), he seems to have come from nowhere. On the list of the Task Manager it shows my web browser and Media Player by using most of the CPU, but I could have sworn that they use so far before.

  I don't know if the RAM would have been a factor, but it was the correct RAM for it and windows recognized to 2 GB.

  Why would it suddenly happened any ideas guys?

  Hello

  I have the same model of laptop and at the moment I have no such problems. To be honest, I did new installation OS 3 months ago and after installing Microsoft Update, I noticed this laptop does not work as before. Just for example: if I use IE7 extensively with several different tabs in the Task Manager I can see this need for IE more than 300,000 k of memory and crashes somehow. After the closure of the IE and ending THE process sin Task Manager I can work normally again.

  I don't really know how your operating system is configured, but in the Task Manager, you should see what running process is responsible for the high CPU usage. Maybe some antivir application? Sorry, but it is really not easy to sayt why this happens. Play around with the current process.

• Qosmio F60 - alert constantly high CPU usage

  Hello

  About 12 months ago, I bought a Toshiba Qosmio F60 computer laptop 6 GB.

  When exploring using games, facebook etc, I am constantly alert of my Norton informing that there is high CPU usage.

  I have asked around locally and advised to delete Norton because this may be the problem. I'm not eager to do what my subscription is still valid.

  I also learned the other day that this is a common problem with laptops Toshiba using 'Explorer' and that I should use "Mozilla Firefox" instead which would correct the problem.

  I am trying to arrange this.

  Can you please indicate if it is a regular problem with Toshiba laptops and reviewing the options above to try to address this problem.

  It doesn't really seem to my computer, it goes more slowly and when in the Manager tasks, it is constantly fluctuating between 5 and 35%

  I look forward for your reply.

  Thank you

  Melissa

  Hello

  This isn't a problem laptop buddy
  Norton AntiVirus is a good antivirus program, but it uses a lot of resources and my experience locks the CPU.

  I removed this antivirus software and now I m using the avast and Avira Antivir free Antivirus software. Both are freeware software.

  But I still use Internet Explorer. Of course, I also installed the firefox and chrome. All these three browsers are great.

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• Satellite A300-1IE - CPU usage high with Bluetooth active

  Hello!

  I recently installed Windows 7 and the Toshiba Software Installer on my Satellite A300-1IE.

  I have a problem with the bluetoothmanager, it's more than double the CPU usage when turned on. When I close the CPU usage goes down.
  This is not normal?

  When the BT active CPU usage is 9 to 15% and when not 1-3%

  Seems to be high. Try an update of the Bluetooth stack.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download
  Ensure that you answer the question during the uninstallation, if all configurations should be removed, with Yes.

• Qosmio G20: CPU too high with video usage

  Hello

  I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.

  I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.

  My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.

  Thank you very much.

  PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.

  Hi William

  I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.

  As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.

• DAQmx read results 2 ms/s in high CPU usage

  I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

  I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

  (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

  (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

  Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

  I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

  (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

  (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

  (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

  • @1 channel, it happened between 950 to 970 k
  • @2 channels, it happened between 470 to 480 k
  • @4 channels, it happened between 230 to 240 k,.
  • @8 channels, it happened between 120 to 130 k.

  This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

  My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

  For your information, I have attached the benchmarking software.

  Thank you!

  Donghui Yin

  I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

• FIFO DMA read high CPU usage

  Hi al, it's a long!

  I noticed a strange behaviour when I read from a FIFO DMA between FPGA and RT host on my crio (9014 controller and 9104 bottom of basket). The FPGA is writing data to the FIFO 2 points every millisecond and the loop of the RT is the reading of 500 data points each loop of the MS 250 CR period is controlled using the hold until the next ms multiple function.

  Wait until the next use means ms that during the first round, the wait will be not so I gave the FIFO DMA read method a timeout of 750ms to allow data points to accumulate on this first iteration.

  I then ran the VI and it read the data as planned and it was always 0 in the FIFO. Then using the system monitor, I noticed the CPU usage on the RIO and was surprised to see that it was 30% !

  After a lot of puzzle and many other attempts as to set the timeout to zero if delays fair read until here, I've decided are enough data points and then executes a little behind so that there is always a constant number (non-zero) of data points in the FIFO. Now, the VI runs and only use about 3% CPU.

  I thought that in the first case as I read exactly the number of points in the FIFO that I was tripping some kind of voting behavior in the playback feature which has been hogging the cpu.

  So I ran a business with a zero time-out, where I was reading with 0 points of data to the left in the FIFO as in the first case and waited to see if the delay of read but it never does and the CPU usage is normal.

  So what's happening? I'm puzzled!

  Thank you

  Steve.

  Hi Steve,.

  I think I can explain the use processor behavior that you are experiencing:

  Case 1: Loop with nonzero time-out

  -Your code starts with wait a multiple ms: This means that a 0-250 ms timeout occurs (on average 125 ms)

  -Then your code tries to read 500 data points in the DMA FIFO (if 500 points come in every 250 ms). All data cannot be presented yet.

  -If 500 points are not yet ready, polling occurs until they are. During the time of the poll, the CPU usage is high. Finally, the data is read.

  -The next iteration of the loop begins.

  -The code is now expected up to 250 ms after the last function call until the next ms Multiple. Roughly the same amount of data should be available by the end of this expectation as in the last iteration. Therefore, the question about the next FIFO DMA read should be roughly the same, and the CPU usage will remain high.

  Case 2: Loop with zero time-out

  -In your code, immediately after the first call to wait until the next multiple ms, you "synchronize" by reading all the remaining data from the FIFO.

  -In the next iteration of the loop, we can expect the call until the next ms Multiple wait the entire 250 m means that the data DMA FIFO (discount jitter) should be ready. If jitter is low enough, this will result in delays very little of the read DMA FIFO and a low CPU usage.

  I would recommend either using a timed loop and read the exact number of data points available (if your application can handle variable size data sets), or using a while loop as you are and make sure that the loop priorities are defined such that the CPU usage high does not affect critical functionality.

  Thank you for the very good question; I personally really like thinking through these issues! Please let me know if you have any questions that deserve further discussion and have a nice day!

  Kind regards

  Casey Weltzin

  Product Manager, LabVIEW Real-time

  National Instruments

• System runs slowly, and my CPU usage is very high.

  High CPU usage

  My cpu is in every sense. from 12 to 100 and slow

  Hi linda lyster,.

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         What is the number and the model of the computer?

  Check in the Task Manager , which process is toll until the CPU usage.

  Follow the steps.

  Method 1: Run the troubleshooter of performance.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  For reference:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

  I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

  After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

  I tried the following:

  -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

  -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

  -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

  -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

  -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

  Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

  -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

  I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

  In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

  I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

  We have done several updates, so I know not that exactly solved the problem, but it is those:

  -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

  -New Intel chipset driver: 1.20 (sp69575.exe)

  -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

  -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

  I hope this helps other people with the same problem.

  Thanks to the HP Support team for their help with this problem!

  Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

• "The CPU usage high" during navigation

  What"the CPU usage high" and why is it when just browsing - is harmful and how to reduce it down? Thank you

  Follow the steps mentioned in the articles below provide

  http://www.ehow.com/about_5552689_cpu-usage-high-Vista.html

  http://www.ehow.com/how_5066314_stop-100-percent-CPU-usage.html