His AXC 603 G problems

Similar Questions

• random crashes on Aspire XC AXC - 603 G-UW13

  Brand new out of the box Wal-Mart

  Aspire unit XC AXC - 603 G-UW13, age of less than 30 hours.

  Random crashes and restarts for no apparent reason.

  I noticed this especially during and after the Windows updates are performed.

  Nothing else that Firefox has been installed so far.

  I delete most of the "junk" that comes pre-installed however.

  Should I come back?

  Never found the problem, it is on the other hand, it does the same thing. Then a back more and I got one that works...

  First and last ACER product for me, sorry...

• No Dolby Digital 5.1 with AXC - 603 G-UW15

  My plan for the AXC - 603 G-UW15 was to use it as a media box. I'm not able to get 5.1 or something other than 2 audio channels on the HDMI. If I turn it on to 5.1 in the sound settings, nothing plays in all... Any ideas?

  I thought about it! I just wanted to put the solution to my problem upwards just in case someone else runs into the same problem.

  When you perform the configuration of the speakers, 5.1 Surround audio test does not and will not play audio to one of the speakers.

  • The get 5.1 Dolby Digital or DTS passthrough on the HDMI (with KODI/XBMC or Windows Media Center), you must leave the configuration of the stereo speakers.
  • Then, on the Advanced tab of the properties of the device, the two exclusive Modes must be selected
  • KODI or Windows Media Center MUST be in mode full screen (not full screen window)

  With the foregoing and content Setup DD5.1 or DTS will cross to the AVR

  Hope this helps someone on the road...

• Want to connect two screens on a desk AXC-603-ur10, what should I do?

  I have two monitors with DVI inputs Dell, currently I have one connected to my HDMI port and still have the free VGA port (as well as USB 3.0). How to connect a second monitor to work off of? Do I need to buy? I tried to pick up a female adapter DVI to VGA HD15 male that I ran a cable from the monitor, but the second monitor does not display anything. I tried windows + p and could not get anything on the second monitor. When I changed from one monitor to the other HDMI cable the monitor worked, but always one at a time. Any suggestion would be appreciated. Thank you.

  Sorry your having problems with your screens...

  I have an AXC 603 I throw that multi monitor on... However for your problem I think the question is your d - Sub to DVI connection.

  I guess you are trying to connect an analogue to a digital input. If this is the case, you would need a special adapter that can cost from 60 to 150 depending on where you buy... in this case it is best to just get a different view. Or unfortunately buy another computer.

  So the question is why would adapter XYZ of sale you have? In short to pass a system A DVI or DVI-i/VGA unfortunately without the special conversion display cannot see the analogue

  I have my sytem with old Sub-d/VGA, VGA and the second port using the HDMI to HDMI interface... It worked with number on all my system I have connected this way. I have a little... Also have a couple that are located on a Tripple screen but not the question here...

  Hope this helps some

  James

• The AXC-603-UC2F comes with 1-4 GB DDR3 memory stick?

  Before you buy an Acer AXC-603-UC2F at Costco, I would like to know if I can switch to 8 GB or more. Specifically, I need to know how many memory slots there and how they are populated initially. It comes with 4 GB; module 1 to 4 GB if all goes well in one of the slots.

  Hello don-mchs.

  To complete the answer to the Sharanjij:

  This model comes with a 4 GB DDR3L key 1600 MHz (Kingston or Hynix).

• Is Acer Aspire AXC - 603 G-UW30 same as Acer Aspire XC - 603 G - UW30?

  I bought a refurbished Acer Aspire AXC - 603 G-UW30 factory.  I can't find any documentation on this topic.  But when I typed in my S/N on the Acer site, he led me to the page Acer Aspire XC - 603 G - UW30 (note the XC, not AXC).

  Can anyone confirm whether or not the Acer Aspire AXC-603 G-UW30 is exactly the same system as Acer Aspire XC-603 G-UW30?  It certainly seems so, but I want to update BIOS to correct certain defects and obviously want to I use the correct BIOS update file (so I don't inadvertently brick computer).

  Thank you

  AXC = Aspire XC

  Aspire AXC = Aspire Aspire XC

  

  the original is just an abbreviation for Aspire.

  You can check it on the website of acer, responsible support research with the number of model AXC gives you nothing, with XC research gives you the right model, you must use XC.

• AXC-603-UR10 for cards WiFi or PCIe expansion card?

  I have an AXC-603-UR10 and I would like to add a wireless card and a PCIE video card.  The case has two spots for expansion cards, but the motherboard has only a small connector that looks like a place to add an expansion card or something like that.

  Is anyone know the part number or model number for an expansion card to go in the slot at the top of the motherboard on an AXC-603-UR10?

  Thank you.

  Hello..

  This model has only a half size mini-PCI Express slot for adding a LAN + Bluetooth wireless card.

• His HT CT660 bar problem: rapid power of inhibition

  I have a new bar of his HT CT660 who has developed a new problem after 2 weeks of use. When using the sound bar the mute on the sound bar will Flash and the resulting sound is wasted up pulses. If I disable the sound bar and turn back the problem resolves to another time when the system is activated again. What happened with the HDMI 1 (Panasonic plasma TV) and HDMI 3 (WiiU) connections. It seems to start the ignition only, not once it has been on and functional.

  Automatic cut-off is a function of the BRAVIA® Theatre Sync/HDMI® feature control. The default setting for the control function for HDMI on the system HT is defined on IT. Pour resoudre solve the problem of INHIBITION, set HDMI control to OFF (page 28 of the Manual).

  Given that the steps to disable this feature depending on your model, follow the steps in the manual labeled to set the [control for HDMI] system power switch manually.

  NOTES:

  • The system HT retains the settings the next time the system is powered.
  • During the setting of the function control for HDMI, Audio Control system does not work. This is a normal operation.

  If my post answered your question, please mark it as "accept as a Solution.

• LabVIEW synthesizer: sound via his MacBook card output problem

  Hi all!

  First time posting here, I hope I'm in the right section of the forum. In any case, I am a part-time student and is currently studying a module on Labview at the University. Like a mini project I decided to build a synth using Labview. I built for the most part, but I'm having a little trouble out of sound for the sound card. I am also having a bit of trouble getting the waveforms to play for a long period of time.

  I was copying sort of the configuration of one of the example of screw (generation sound vi I think) and an another vi I found online, but I can't seem to get mine to work using my synth design. I have two problems, one is that the waveform only play for a very short time, but the main problem is that I am getting an error (error 4803) saying the sound card can not accommodate the specified configuration, but I can see my setup is more or less the same as the generation sound vi (which works on my thin macbook). Obviously I'm missing something, so I decided to come here and ask for help.

  I'm guessing that the type of data connected to my exit the configure vi would be a problem because it has a red dot on the input terminal. Any suggestions on how I should resolve this problem?

  I have my attached vi. Any help would be appreciated!

  See you soon!

  Edit: I have already corrected the error 4803. Had to change configure the entry to the audio output sub vi. Now, I just have to find a way to get the sound to play for more. Any ideas anyone?

  Ok. You have several problems.

  The order of cluster in your cluster size is rate, Bits, channels, while the order in the cluster 'sound format' on Configure.vi of output is the frequency of sampling (s/s), number of channels, bits per sample. LabVIEW connects clusters according to the order of cluster. How to avoid this: Pop up on the conpane format of its terminal on the icon Configure.vi to audio output on the block diagram, and then choose Create a control. This will put a control with the same names and the order of cluster on the front panel. You can change the name if you wish as long as you do not change the order of cluster. The alternate is to unbundle your cluster control data, and then package it to the cluster of entry. I watch this the change of your attached VI.

  The VI does not meet the Stop button until the structure of the event runs, which occurs when a key is pressed. FIX: Add a case of event for the Stop value change event. I watch this the change of your attached VI.

  The VI does not recognize changes in the Octave, Amplitude, Osc Select or filter frequency until the second keypress after changing one of these controls. Why? Stream. These controls are probably read in the microseconds after one iteration of the for loop starts. They do not play again until the next iteration no matter when or how many times they are changed. The loop will not iterate until the end of the structure of the event, which only occurs when a key is pressed. The Fix: Case of event for changes in value on these controls. Note that this does not work because now there is no set frequency. So you have also some registers at offset. Because of the problems mentioned, I did not it in modified VI.

  Then, the structure of the event freezes the façade has not completed the code inside. This becomes very apparent when you set the duration to 2 seconds, press multiple keys quickly. The solution to this issue and the problem in the previous paragraph is a loop parallel archtitecture, such as the design of producer/consumer model.

  Not a problem but another way to do something: use the scale of power of 2 in the digital palette instead of the case connected to Octave structure.  I watch this the change of your attached VI.

  Now to your question on the tone duration: the duration of a signal generated by the sinus Waveform.vi and others is determined by the sampling frequency and the number of samples. You are studying, you can do the math. You need to adjust the number of samples as the sampling frequency is fixed.

  The modified VI works fine on my iMac.

  Lynn

• I have an Aspire AXC-603-UB17

  I am trying to burn a CD or a DVD, but the optical drive does not recognze my drive. I put a CD without success then tried a DVD without success.  The reader reads a CD/DVD, but does not recognize a blank disc. What is the problem?

  Hello

  Try This Microsoft Fix it.

• Woman has forgotten his password and having problems signing.

  Since we share the same computer, is it possible to send his password to my MSN account email?

  Hello

  If you are an ADMINISTRATOR, you can change the password of your account or any ADMIN - login as an ADMINISTRATOR-
  Control Panel - user accounts - manage another account.

  -------------------------------------------------------------------------------------------------

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Inspiron 9400 jerky his Vista 64 bit problem

  When I bought my laptop with XP there was no problem. A year and a half ago, I installed a legal version of the Dutch version of Vista 64 bit and since then I have problems with playing MP3 or music streaming websites. Sound chops / hiks every 20 or 30 seconds.

  What I tried to solve the problem:

  1 installed new drivers on dell support page

  -New driver Dell Wireless 1390/1490 (15/05/2008)

  -New audio drivers Sigmatell A02

  -New Bios A09

  -New chipset drivers

  2. install the other playbackprogramm such as WinAmp

  3. read this forum, found a sollution much of the same problems, but none

  Nothing works. Only the new driver to a wirelless Dell seems to help a little bit--> the sound cutlet / hick interval is longer (about 1 minute now).

  Who knows the answer to this very annoying problem?

  
  

• His BOP-S590 optical problem

  Here's my setup.

  SHARP Aquos

  Sony Blu - ray BDP-S590

  LG Sound bar NB3520A.

  HDMI from Blu - ray to the TV and Blu - ray optics to the Soundbar.

  I have also a harmony logitech touch control all devices.

  Here's the problem:

  Never 25 minutes the sound bar power auto turned off because he thinks not, it receives a signal. The sound will be played through the sound bar very well (it today with different optical testing in ports on the sound bar has not solved the problem).

  I think it's a matter of Sony and not a sound bar delivers because

  My Xbox is also implemented in the same configuration (just replae it by appointing any blu - ray) and it works very well and can keep the Soundbar on etc.

  I read about the manual of Sony and the LG many times and I think it might be a configuration problem on my end. But I'm lost. I can't find in the menu blu - ray how to say blu - ray do not send sound via HDMI and just use the perspective check.

  It is a problem of double trouble because if I don't turn the volume down on the TV I have two sound sources (TV and soundbar) who are not Sync, so it sounds like an echo.

  Is it possible to configure the reader sends no audio on the HDMI, or tell the player to use the optical output as the audio source by default?

  I solved the problem, I have the audio setting HDMI as Auto
  2 settings are disabled
  and the other setting that to run, I changed bitdownstream to the PCM

• snapshoot problem with his camera or sound problem

  I bought a used iphone 5 and I cannt turn the sound off snapshoot. silent swith is activated but sound is not turned off (... help me please what can I do...?)

  With the open camera app - open the "secret" key until the orange Strip shows

• AXC 603 g uw15 pc keep losing internet connection (wired) every 10 minutes

  Just bought this computer and connected to my smart TV. It is connected to both router. He keeps falling connection every 10 minutes or more

  Thank you very much, Mr. It seems updated drivers did the trick.