His lost in my 5.1 surround speakers Realtek High definition.

Similar Questions

• Realtek High definition audio (onboard) do not recognize the rear speakers. statics of the right speaker.

  Realtek High definition audio (onboard ASUS CG5270)-current driver v6.0.1.6043
  Operating system: Win7 64 bit

  Everything was working fine until last week. I haven't had any changes and update logs don't show updates.

  Question:
  Using "Manager Audio Realtek DD" in the control panel.
  The rear panel does not all speakers connected. (Speakers tested and work on other systems.)
  No noise at all until that I disabled the front jack detection. Now I hear threw the rear speakers but with static 1/2 volume, without mute and the "Realtek HD Audio Manager" shows still no rear speakers.

  Things I have tried:

  1. check the connections (connections of cleaning)
  2. different stakeholders.
  3. Uninstalling the drivers and software.
  4. update of drivers.
  5. Rolling back the drivers.
  6. The system restore.

  Note: the "Realtek HD Audio Manager" shows the digital connection and the façade as available, but disappeared on the rear panel, even if the rear panel is only taken in use.

  I can usually solve these problems on my own, and it's the first time that I used a forum to ask for help in 15 years. I'm just puzzled.

  Hi, reorder,

  As you have tried almost everything to fix the problem, I would like to allows you to check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click Start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set on mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access control panel

  2. click on sound

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on properties

  6. Select tab improvements

  7 disable all improvements

  If the steps above do not work, you can contact the manufacturer of the motherboard and try to reset the BIOS to default settings and check if it helps. You can also take their support and try to update the BIOS and check if it helps.

  NOTE: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk

  If the above steps you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• His lost after system restore

  Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.

  This may be of some use for you guys:

  Value of the property
  Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
  Status 0x0180200a started
  Blocking problem 0 x 00000000 (0)
  Service IntcAzAudAddService
  Blocking capabilities 0 x 00000000
  Config flags 0x00000000
  Class MEDIA
  Manufacturer Realtek
  Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
  Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888
  HDAUDIO\FUNC_01VEN_10EC
  HDAUDIO\FUNC_01
  Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
  Location internal High Definition Audio Bus
  Bus number 0x00000000
  Name of the enumerator HDAUDIO
  Description Realtek High Definition Audio
  Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
  Name of the object physics \Device\000000a2
  Number of UI 0x0000ffff
  BusType GUID {41203534-2037-3144-2042-422044362041}
  Former bus type 0x00000005
  Type of device 0x0000001d
  Installation state 0 x 00000000
  The device address 0 x 00000301

  Oem2.inf of device Configuration file
  CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
  AssociatedFilters Wdmaud, swmidi, redbook
  Pilot RtkHDAud.sys
  InfPath oem2.inf
  InfSection IntcAzAudModel
  InfSectionExt. NTx86
  ProviderName Realtek Semiconductor Corp.
  DriverDateData 00 40 18 67 CA 01 E7 D7
  DriverDate 17/11/2009
  DriverVersion 5.10.0.5983
  MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
  DriverDesc Realtek High Definition Audio
  SetupPreferredAudioDevicesCount one

  Class MEDIA
  Audio, video, and game controllers
  Installer32 MmSys.Cpl, MediaClassInstaller
  MmSys.Cpl, MediaPropPageProvider EnumPropPages32
  Troubleshooting-0 hcp://help/tshoot/tssound.htm
  Icon 3004

  Thank you!

  You can try to contact support from Realtek:

  http://www.Realtek.com.tw/contact/

  Also, try to run this fixit:

  http://support.Microsoft.com/mats/AudioPlayback/

• Realtek High Defination Audio speakers is not plugged in, no sound in Windows

  Hi guys.

  I got my PC for about 2 years now, and all of a sudden my audio stopped working. When I go to manage my audio devices in the Control Panel, it says "realtek high definition audio speakers are not connected. I use the onboard sound on the motherboard Asus Maximus V extreme.

  Therefore, the realtek digital output has been selected automatically. I since changed it NVIDIA high definition audio digital output - so that sound for now plays on my speakers monitors via the HDMI cable.

  I tried my speakers on an MP3 player and they work no - including the cable, so the speakers and cable are not a problem.

  I tried to restore the pc to a time where noise - WORKS DO not STILL working.

  Downloaded the latest drivers Realtek and installed - DOES NOT ALWAYS WORK.

  Deleted the latest drivers and install them from the CD of motherboard drivers - DOES NOT ALWAYS WORK.

  I disabled all audio devices, hoping that speakers will then - DO WORKS not ALWAYS. Help, please...

  System:

  Windows 7 Pro 64-bit

  Extreme Motherboard Asus Maximum V

  MSI N460GTX Cyclone OC GPU

  

  

  Hello Chantal,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur either because of corrupted audio drivers or incorrect audio settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Troubleshooting of audio playback and check.
  Reference:
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Using old Dell on a new '' surround speakers

  I just bought a new Dell XPS 8500 and planned to use my old Dell surround speakers I bought with my older Dell XPS in 2005.  As one might suspect him, the color coding is not to help me.  I need advice on how to plug them in.  My old speakers have three strings, color GRAY, BLACK & YELLOW.  My new XPS has six input jacks audio in the back in two rows of three.  The colors on the catches are GRAY, BLACK, ORANGE and RED, GREEN, BLUE.  What should I do?

  Thank you

  Lloyd

  Since no one answered my questiom, I tried to connect my old ADA995 Dell speakers (Altec Lansing) for my Dell XPS 630i system. Everything seems to work. Here are the links I used:

  The ADA995 has 3 entrances.

  1. Center & subwoofer (yellow)

  2. before left & right channel (green)

  3 channel left & right rear (black)

  The XPS360i has these outputs.

  1 surround his (black) connector

  2, taken headphone/line-out (green)

  3 side surround connector (Silver)

  4. Center connector subwoofer/LFE (orange)

  The connections I used were Yelllow > Orange, black > green and green > Silver.

  As far as I know, six audio ports on the XPS 8500 have the same color code.

  Chip

• How is it, 5.1 surround speakers do not work with my computer?

  I decided to buy 5.1 surround speakers and I bought Logetich Z506. The problem was that I had no experience of surround sound. The front satellites and the subwoofer has worked. The Center and the pair of two rear speakers did not work. Well I am running Windows Vista Home Premium 32-Bit and my desktop is an Acer T180-ED390A(2007 model). The sound card driver that I use is Manager DD audio, Realtek and I noticed that I have 6 audio audio outputs on the back of the desktop computer. The audio outputs 6 are orange (central/subwoofer speaker), black (rear speaker), gray (speaker side), blue (line), green (front speakers out), pink (mic in). It seems that it supports 5.1, but it does not work. Can you please explain why it does not work?

  Hi JJJanu,

  You can try to update the latest version of the drivers for the Realtek sound card and try to set up the speakers again. Make sure that you get all the speakers sound or not.

  Realtek downloads

  Get high definition sound and music from your computer

  Sound cards: frequently asked questions

  Update drivers: recommended links

  Hope this information is useful.

• Reference 5.1 Dell 5650 surround speakers very quiet

  Hi all.

  Im a total noob at all it is so gental lol.

  Ive had a dell 9150 and dell 5650 5.1 surround sound.  Ive connected everything according to the manual, but I have to hold a speaker until the ear just to hear the music.  Ive checked in Device Manager and I have a Sigmatel high definition audio codec version 5.10.0.4823 driver installed.  In the control panel all volume levels are highest and the Soundbar on the bottom of the screen is also completely clock wise.  All speaker connections are in and the 3 x 3.5 mm plugs are in the right order.  Integrated sound card is also value on in the BIOS.  I don't know that catches and sound card are works well as another set of speakers works.  I could be missing something that is an easy fix.  Any help will be much appreciated.

  This is my system:

  Dell dimension 9150

  Microsoft xp professional version 2002 SP3 with intel pentium 4 ht.

  Thanks in advance

  Neil

  Hi Neil,

  Dell Dimension 9150 supports a surround sound 7.1 via its embedded audio codec. He must connect the green plug to the green port, black pine in the black port and yellow pine from the speaker to the yellow port.

  

  You will need to select 5.1 speakers in the Creative Media Audio Software and check the synchronization with the control panel option. The volume of each speaker in the Surround Mixer.

  Please reply to this message if you need help.

• Have a spkr 5.1 surround speakers back system. No volume upwards or downwards. FRT Ctr & void work very well.

  I have all the cords(3ea.) connected to the back of my Tower. I would like to hear during the game.

  Hello
  
  1. have you configured your speakers 5.1 in windows setting?
   
  Method 1.
  Configure your speaker settings 5.1 as explained in the article below.
  Get high definition sound and music from your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer
   
  Method 2.
  You need to install the sound card drivers from the Web site of the manufacturer of the sound card for Windows Vista. Contact the sound card manufacturer for compatible Windows Vista drivers.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Envy Phoenix 850-065se: can't get Logitech Z906 5.1 THX Surround speakers to operate on Envy Phoenix 850se

  Just got a new 850se want Phönix and get all my fixed gear and functioning before joining the Windows 10 unit (under construction factory of Windows 7).    This product has Realtek HD Audio hardware and software of Bang & Olufsen.  The two configuration screens to test the connected speakers, but only produce a sound to two loudspeakers, which are connected to taking 'green '.  Bang & Olufsen config display 3 speaker inputs (6 channels) must be placed in the catch of green, pink and blue.  Realtek configuration screen appears to show that only the 'green' Jack is used for the output from the speakers.

  I want to get that last piece of hardware working before you perform the upgrade to windows 10.

  Please advise on the things to inspect and options to activate the speakers 5.1 surround to work.

  Thank you

  RPH

  Find a setting that works.

  On the Z906 Control Panel, disable the option NO EFFECT (3D, 4.1, 2.1) and all stakeholders work as needed in the right order (position).

  Also for reference, a good connection has been determined as follows:

  Green (subwoofer) to green (PC)

  Rose rose (PC) (subwoofer)

  Black (subwoofer) to blue (PC)

  Thanks to all respondents.

  RPH

• his lost after an update. need help please

  had some kind of system update. his has worked yesterday. update today and now nothing.

  Here is what I have

  HP Pavilion HPE h8xt
  • Genuine Windows 7 Home Premium (64-bit)
  • Intel Core i7-2600 processor four hearts with Turbo-Boost [upward to 3.8 GHz, 8 MB cache]
  • 9GB DDR3 1333 MHz SDRAM [3 DIMMS]
  Drive hard • 1 TB 7200 RPM SATA 3 Gb/s
  • No additional desktop software
  • SAVE $20 on Norton Internet Security (TM) 2011 - 15 months
  • 2GB DDR3 NVIDIA GeForce GT 530 [DVI, HDMI, VGA adapter]
  • Power 460W
  • DVD SuperMulti burner
  • Blu - ray player & DVD player
  • Card of premium LAN Wireless-N and Bluetooth (R) (2 x 2)
  • 15-in-1 card reader memory, 2 USB 2.0 (front), audio, 2 USB (rear-facing top of page)
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound

  These speakers... http://www.shopping.HP.com/webapp/shopping/product_detail.do?product_code=BR386AA%23ABL

  Hello

  Please follow these steps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Kind regards.

• surround speakers

  I have 5.1 surround sound speakers that work when I test them, but two additional speakers do not work when I listen to music via itunes, spotify, or watch television. I tried to fix this using the correction of this site and using the Troubleshoot utility, but nothing seems to work, and as I'm not really into computers I don't know what else to do. I would be grateful for any help. the speakers worked perfectly until a few days ago.

  Hello

  (1) do you have made no changes before this problem?
  
  (2) have what FIXIT you tried to solve this problem?
   
  Follow the steps in the articles below and check if the problem still persists.
  
  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02
   
  Method 2: Diagnose and automatically fix the audio problems and audio playback
  http://support.Microsoft.com/mats/AudioPlayback/
   
  Also, see the below link for assistance.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  You can check individual program settings and make sure that all are correctly defined. Also, make sure that all the sound settings option in the notification on the mixer tab tab are correct.
   
  Hope this information helps.

• His lost

  My laptop HP 2000 sound enough work. He worked earlier in the day and just left. Also at the same time I can't watch youtube videos when I was earlier in the day. I get a message saying "year error occurred, please try again later". The video starts to play and then I get this message.  Help

  Hi MGJA,

  I understand that its has ceased to function on your computer laptop and you can't look like you tube video. I'll try my best to help you with this problem. Could to better help you, you please give me some additional information.

  1. What is the model number of your laptop? LINK: How can I find my model number or product number?
  2. what operating system you use on your laptop?

  Here's a document for Its number of speakers (Windows 8), which should solve the sound problem for you.

  I also suggest using automated troubleshooting (Windows 8) to solve the problem of the internet.

  I hope that this information help, please let me know how it goes.

  Thank you

• His lost on my Satellite A30 303

  I seem to have lost all sound on my laptop and now when I connect to my office, he told me to there are hardware found what pilot it. But when I go and try to find the driver, he can't find anything online. I don't know if something has been deleted by mistake.

  Hello

  I think that your audio driver is corrupted.
  Download it here:
  http://EU.computers.Toshiba-Europe.com
  (Support & downloads-> support home page-> download drivers)
  and install again.

  Good bye

• his lost after windows update

  Windows Update ran on August 3 and August 4, 2010. After one of these updates, I lost sound. How will I know that update has been the cause of my loss of sound? I have to go remove each update one by one until I have to get sound or y at - it an easier way? I am running Windows XP as SP3 OS.

  Mike,
  You have several sound devices on your system? for example , is there an audio set (blue, pink and green 1/8 "female audio taken audio) on your motherboard, as well as a set on an expansion card?  If so, you may need to select the correct sound playback and recording device in the tab "sounds and Audio devices" control panel "Audio".

  Please, vote if it is useful.  In addition, select mark or propose as answer if that answers your question, please.

• His lost after letting down my keyboard out of office. Check its software - all about. How to restore?

  Have a HP Pavilion Media Center m8330f PC - 5 years.  Night before struck my computer on the desktop and in landed in the nest of wires.  From there I have no sound.

  I finished my move and COX Cable my computer for me but still no sound.  I checked all the places that I can think of and they all indicate that my sound is working.

  Suggestions appreciated.

  Sue

  You may want to consider a different way to get the sound from your system. For example, for my personal computer at home I use a standard jack and connect my audio cables to my computer to get sound instead, I use powered USB speakers and all the sounds are routed via the USB port. Assuming you have a spare USB port, this can be a good alternative.