Historical files can not find my USB drive.

Similar Questions

• Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
  http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• On a start box appears and says can not find.ini:d\driver\chipset\asussetup_hotfix.ini

  My computer starts up fine but when the screen shows Office I get two error boxes that say can not find.ini:d\driver\chipset\asussetup_hotfix.ini

  It seems to be looking for drivers for Asus in my DVD player. All the drivers are installed and everything works. I only stop those two boxes from popping up. Can someone help me with this?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope this information helps.

• Can not find the hard drive on the A200 Satellite during the xp installation

  I have a Satellite A200 (PSAE3E).
  When I try to install Windows XP it prompt can not find any hard disk.
  How can I install win xp?

  Just visit Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. On the download page to choose your laptop model and download Storage Manager.

  Reserved for the installation of Windows XP Home edition to the Please Windows XP Home with Service Pack 2. When facilities procedure starts press F6 button and load the driver SATA (floppy) and the HARD drive will be visible and you will be able to continue the facilities.

  Good luck!

• Can not find the ACPI driver for windows 8.1 for g40 - 80

  I can't find the ACPI driver for lenovo g40-80. I tried the win10 version, but it did not work.

  Could someone kindly help?

  To get the ACPI driver for Windows 8.1, you will need to install OneKey Optimizer - link

• Windows CD can not find installed hard drives

  I have a PC that has windows XP installed and worked well and I have DSL so I kept it updated. It has been updated for the updates. It was a month that it seemed hung on a windows update and I've finally powered down to exit the update mode. After that, he would finally in XP but would not other that the busy when an icon is clicked. I decided to reload XP using the same CD I used originally when I built PC. It will load the drivers to install XP, but when installing windows is selected it says no hard drives found. When booting 2 HARD disks are displayed, but are not detected when you look in the BIOS. I've tried changes in the BIOS as auto detect HDD including default BIOS and not go. I remembered to change a partition using Partition magic 8.0 and decided that might be the problem, so I started in the magic of partition and formatted part C of the HDD in NTFS, but the results are the same. Any suggestion is appreciated. TIA

  Do you mean you see a message like this?

  Setup did not find any hard drives installed in your computer. Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Setup cannot continue. To quit Setup, press F3.

  If the disks are not appearing in BIOS, it seems unlikely that XP will be able to see them no more.

  Describe the best you can, your hard disk configuration...  IDE, SATA, SCSI, RAID configurations...

  You build the hardware yourself or is it a system store bought?

  Are you able to determine when the system turns on, the brand and model of your motherboard and the BIOS it is running?

  Without more information, I can only offers these general reflections where to search:

  When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

  Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

  Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

  You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

  Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

  The adjustment varies so here are some examples that I have accumulated:

  The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.  After you make the changes, save them and restart your XP installation program.

  If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

  If you find that the mode is set to AHCI, change the ATA mode.

  If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

  If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

  If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

  If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

  If find you the setting that works for you, I would like to know what it is so I can add it to my notes.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

  I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
  Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

  My R40 description is by Lenovo site is:
  Product: ThinkPad R40 2897 B4U
  Operating system: Windows XP

  Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

  Lenovo driver update page, I have the following choices:

  Network: R40, R40e wireless
  (1) mini PCI driver of cisco Wireless LAN

  (2) high rate Wireless LAN Mini-PCI Adapter III
  Note: The models ThinkPad R40 2681, 2682, 2683

  (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

  (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
  Note: The models ThinkPad R40 2722, 2724 only, 2723

  My card is listed for models 2722 2723 and 2724 ONLY.

  Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

  Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

  Can anyone help on what version of the software update I should use?

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

  I hope this helps.

• Pavilion g6 2313ax: can not find the bluetooth driver

  I could not the bluetooth driver for my laptop.  Only the driver for windows 8 are available, but my laptop has windows 7 Professional. Where can I find the suitable driver for my system? Help, please!

  Hello:

  See if this driver works...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• Cannot reformat, says Pavilion «can not find hard disk Drive»

  I want to reformat the laptop HP Pavilion dv6000 my grandson. When I try, it loads Windows xp, but then says it cannot find the hard drive.

  The laptop is to some extent functional, but displays several error messages auch as "one or more files are corrupted" and "some partitions damaged."
  The unit offers to try to fix the problem, but fails.
  In addition, the "Start Menu" from the programs list does not appear, it says 'empty' when I click on "All programs" in the Start Menu.
  In addition, no icons appear in the "Start Menu", but "My Documents, my pictures, my computer, etc. are all here.
  By clicking My Documents, nothing is displayed. ------, but the computer responds and shows the 'disc C' and available memory, etc..

  What I would like to do if possible is:

  1 as the player works to a degree, try to get the GET disk xp, program that recognize so I can reformat.
  2 celebrate!

  Would be more happy of all assistance. Thank you.

  Hello
  The laptop is running. And we are justified. I just talked to the man who has done the work to local ghe Geek Squad. He proceeded as follows:

  1 update the Windows operating system (OS to nu xxp) to service pack 3 using available cds which I did have.
  2 went to another computer and downloaded the drivers HP form.
  3 installed the drivers and it went online as a champion.

  Apparently the version of xp was so old that the drivers, I downloaded from HP on another computer and burn it to a cd, simply move in the laptop.

  So, no way we could proceed without saving this service 1 one 3 discs. I had actually tried to download these service packs, but all I could get was service pack 1a .who might also do not install.

  Thanks again. you were right on target, but I couldn't do it.

• Can not backup on USB drive, says that there is not enough space, but there are many

  I was able to save only once.  the total size was about 4.2 billion.  Now XP doesn't let me put anything on the drive flash 8 bigger than 4,2 g. I tried to crush, deletion, reformatting, renaming - you name it.  I can put large files on the flash drive with other computers, so there must be something done XP.  In properties, it shows a lot of space, but I still get the full message of media

  Well even if you have too many files, size does not matter in the folder root of the USB then
  You can not copy more to it... try to reduce the number of files in the root folder. Try to copy everything
  the files on your hard drive and remove it from the USB and try to copy your file to it. Rob - bicycle - Mark Twain said it is good.

• Can not burn to disc.  Burn the file, can not find the file, what gives?

  43 min, marriage project 2.7 GB . Can't burn the disk, can't find the iso file.  What's wrong?  I worked on it for three weeks.  Several chat sessions, uninstalled EP 11 and 13 of PE.  Reinstalled EP 13.  They say that the burn because of the disc is a known issue.  When I try to burn it to a file or an ISO file, the program says it was successful, but it does not appear in the destination.  I tried shorter test files, etc.  Nothing helps.  Are other people having this problem?

  Václav

  There are several known issues with regard to burn on in elements first 13/13.1.

  The most recent is burn it to disc, folder or ISO Image and not finding the format of the final product.

  Several overcame the issue by examining the problem with and without the preference of the Intel HD Graphics 2000 and higher disable in Edit Menu/preferences/general. And then to go with the choice that worked for them...

  Another issue related to an ISO Image burn when the .iso file has a file size of 1 GB or more. Many have reported that the use of the .iso to produce product results of disc with the player not to recognize the format of the disc.

  First Elements ATR troubleshooting: EP 13: ISO Image File Size question

  There are several cases where Premiere Elements does not recognize the burner in the field of the dialog box to the location of the burner burning, and there are cases where the status field remains with missing media. Many of these cases are not resolved, many try another drive or another drive, for some uninstall / free ccleaner Cross (regular and register cleaner parts) has solved the problem, some go into the video editor.

  Please explore the above and let us know the result. Then we could discuss what then if you have not exhausted all the users, troubleshooting of the possibilities.

  Thank you.

  RTA

• Can not find the audio driver for Win XP for Satellite P305D-S8900 CONEXANT

  OK, I hope someone out there can help becouse thit fist.

  I'm about to return this laptop for Toshiba and go through another manufacturer for laptop that can be downgraded to WIN XP pro.

  I tried for a week to find a driver to work on this laptop to nothing does not.
  Corsica Toshiba says that 'the COMPUTER is DESIGNED for WINDOWS VISTA"as it means something and then they tell me to unscrew...

  So what I have is a Satellite P305D-S8900 and I need the audio driver for Win XP.

  Now, as far as I can tell, it's a driver audio conecant but I can't find one that work of wil.

  Any help; is greatley apericeated.

  Hey Buddy

  First of all, you can install all possible OS on your P305.
  It true s that the P305 has been pre-installed with the Vista operating system, but of course, you will be able to use other OS like Win XP

  Why you n t check the European driver Toshiba page and choose the show Satellite P300. It of similar to the Satellite P305 (U.S. series) and you'll find the Conexant audio driver!

  As far as I know at this time the 3.47.1.50 versions seems to be a more recent.

  See you soon

• Low volume after installing several different drivers. Can not find the original driver to reverse the effects

  Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

  Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

  Any advice would really be welcome

  Hi @kendrat0,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

  If I understand correctly the audio quality is lower than expected and need a solution.

  (Correct me if I'm wrong, and I thank you for the details)

  Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

  I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

  Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

  Perform a hard reset

  * Reset the BIOS default

  * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

  * Update the BIOS

  * Reset your computer

  Perform a recovery of the HP system

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.

  Kind regards

• M70-122: Linux can not find a HARD drive

  I have a problem with the hard drive in my M70-122. I whant to install the Linux operating system and when I try to install the Linux say 'NOT FIND HARD drive TO INSTALL OPERATING SYSTEM'
  I try with different distribution of Linux, but nothing.
  And I did not understad what is my HARD ATA or SATA drive.
  Thank you

  Hello

  This device was equipped with a SATA HDD. This might be a reason why it of not possible to install Linux. It takes the drivers before you continue to the installation of the OS.
  Unfortunately Toshiba doesn't support Linux and you will not be able to find the Linux drivers on the Toshiba site.

  Please also check the other postings on Linux and SATA
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9748&MessageID=34420#34420

• Can not find Bus USB controllers

  Hi, I have a pavilion laptop 1045dx m6 equipped with an AMD processor and when I open Device Manager it detects it but says the drivers are not installed, Ive looked, but I can only find drivers for m6 mobile computers with CPUs intel and I don't know what motherboard I have

  Hello

  Here is the link to HP for the drivers, etc. for your laptop model:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5273906&LC=en&cc=us&DLC=en&lang=en&cc=us

  There is a scan for link drivers there, too.

  See you soon.