Historical work shows printing but nothing is printing

Similar Questions

• Canon printer works, but nothing is printing

  Printer works but nothing is printing.  Do not have an indicator that the ink cartridge is empty.  No warning.

  Hello

  · What is the model number of the computer?

  · Were there any changes made on the computer before the show?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  You can also follow the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  It's an old printer and there was only the 32-bit drivers for Windows 98 to Vista. Canon are unlikely to write 64-bit drivers now.

• I have windows vista, my printer is working paper is fine, but nothing is printing on paper there is ink.

  just installed my hp deskjet D4260 printer as I said it is running, the document is fine, but nothing good print on paper.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• When I print to my HP Laserjet 4000, the display shows the data received, but nothing happens

  I have an old printer, HP Laserjet 4000 and a new computer with Windows 7. Printer is connected locally.  When I try to print to it, the screen reads the received data, but nothing happens. Help?

  Hello

  Try the methods provided and check whether the problem is resolved.
  Method 1:
  Check out the link and follow the steps.
  
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Method 2:
  See the link, run the Fixit and check if the problem is resolved.
  
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 3:
  Check the link and try the steps of troubleshooting described in the article.
  
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• After upgrade to Windows 7 - printer is installed, but nothing prints

  I see some posts with people who say that their printer is installed, but when they try and printing is queued for the print spooler and then disappears, or they say they can print a test page for the HP software but nothing prints.

  Most of these people seem to have migrated from another version of Windows to Windows 7, and they have configurations and different printers.

  Through testing, we found that this fix works.

  How to fix

  1. Unplug the printer if it is connected via a usb cable.
  2. Click the icon and select all programs.
  3. Select the HP folder, and then select the printer and select Uninstall
  4. Once the uninstall is complete, select devices and printers
  5. Click on another printer or Microsoft XPS Document Writer
  6. Click on the printer server properties in the top menu
  7. Choose the drivers to the installed printer drivers , select the printer that has been uninstalled in step 3.
  8. Click Remove and when we asked him to choose to remove the driver and driver package and click ok.
  9. Install the Windows 7 software for the printer.

  I would like to say a big thank you to all who have posted on this subject with the details of their facilities, etc.  This information has helped me make this fix.

  Thank you

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Printer HP Deskjet D1460 does not respond in the laptop but printing show print option

  Mr President, 2 years ago, my hp deskjet d1460 works well in Asus X54c. After 2 years when I placed the new cartridge 21-22 don't is not printing. But the printer shows printing. In short, through control of the laptop I couldn't make answer to this printer.

  PL. suggest

  Mr President, it is later can print, but before my file selected print the print file name, directory, and so wasted 1 extra page excess in every print of my impression of selected file.  As suggested by the intermediary online is now is solved by deselecting "dicucument properties." in the option file. Thank you very much

• HP4500. Wireless: Wireless HP4500 - prints Test Page but nothing else

  I just bought my first iMac.  I also have a HP (Windows) laptop connected wireless to a HP Officejet 4500 Wireless printer/fax combination for work.  For the new iMac, I loaded the software from the HP drive.  The test page printed beautifully, but nothing prints.  No e-mail, not a word processor file, nothing.  I have tried the uninstall / reboot / reinstall way nothing helps.  I saw the instructions to configure a static IP address, but I'm not sure what could do to my current computer-printer link.  Any suggestions?

  Unfortunately, I am not sure I can reproduce the steps but I finally got my printer to work.  I had to install a new driver from HP and Hello "Multifunction" from Apple.  After several reboots, the printer works now.  Sheesh!

• The printer displays up to 40% print, but nothing happens

  Original title: I try to print from the laptop to the printer

  I try to print from the laptop to a lexmark 4650. It will show what it will print, she even wake up the printer and then show up to 40% print but nothing

  Hi goofy55,

  1. don't you make changes before the show?

  We recommend that you run the printer Troubleshooter and check the result. To do this, try the following steps:
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 6500 Wireless: Print - stream paper and sounds right but nothing on paper.

  Recently the summaries printed and everything was fine.   Replace the ink cartridges and now when we try to print something, the flow of paper into the printer and sounds like its printing but nothing does not appear on paper when it comes out.  When printing e-mail, it will display the title (to, from, subject, etc.), but nothing in the body of the e-mail draws.  I aligned the print heads and cleaned the print heads, but still nothing. Any ideas on what could be the problem?

  After I replied that the attempts did not work, I tried cleaning and aligning the printheads again. This time, it worked like a charm. Thank you very much for your help, you have my sincere gratitude without end.

• says it is printing but nothing comes out

  All-in-one HP Psc 1350

  X.7.2 OS

  My utilities said printer sends the document to the printer, even shows % finished (no message offline or idle), but nothing comes out of the printer.

  Also impossible to install the software as "PowerPC is no longer supported.

  Thoughts?

  Hi the4kosmos,

  Indeed the software on the CD supplied with your printer, or also the software available on the HP download pages are not compatible with Mac OS 10.7 Lion. However, you can install the HP Printer Driver Update 2.8, which contains the drivers printing and scanning (via print & scan, preview or Capture of Image).

  You may already have? If not and you use a different print driver, I suggest that you simply remove the current printer queue. Make sure that your device is connected directly to the USB port on your Mac. Then add the printer and you should get a message that there is software available to install - accept, so installing the respective drivers. See this document for more details: OS X 10.7 Lion: install and use the printer with Lion

  If this message does not - maybe you're not connected to the internet - you can also download a full package of the HP Printer Driver Update 2.8: HP v.2.8 OS X printer drivers

  Information on how to scan without the HP software, you can find here: How to perform a scan in Mac OS X 10.6 and OS X 10.7 without use of the HP software

  On the question of printing, make sure that your device is connected directly to the Mac's USB port and the USB cable is not longer than 3meters. You can also try another USB port and USB cable to another if the problem persists.

  Hope the information is useful.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44