Hot sync with vista

Similar Questions

• Hot sync with Vista Home Premium 64-bit

  How can I get my TXD to synchronize with my new laptop with Vista Home Premium 64 bit?  Is it possible?

  Hello and welcome to the Community Forums of Palm.

  Your question is often asked and answered here on the forums.  There is no way to use a USB Hotsync connection with Vista 64-bit desktops.  Your solution is with Bluetooth, as described in this thread stickied near the top of this map.  You can also try a Wi - Fi connection.

  Message relates to: None

• Sony clie hot-sync with Palm desktop on Vista (32 bit)

  I got my Clie TH-55(Palm OS 5.2.1) for some time now, say 2 years, but recently, I made the switch to Vista (not by choice, I got a new laptop for free). I had been synchronize my CLIÉ Palm Desktop and so when I got my new laptop, I went and download desktop 4.1.4e in the hopes that I could continue the sync on vista. The installation went well, it is, I can do a hot sync but none of my data transfers. If I create a new contact on my handheld, it will not be displayed on the desktop and even vice versa. When I check the hot sync log, it says that there are no errors. I didn't know if I should go to the forums of Palm or Clie forums so I apologize if this is no longer a Clie problem which should be in the forums of clie. Thanks in advance...

  
  

  Message relates to: None

  I found the problem, it had to do with the running of the Office to palm as an administrator. Once that I thought that was the problem, I put it to always run as administrator.

• Try to get my Centro to Hot Sync with my new Dell with Vista!

  I just bought a new computer and assume everything I had to do was download the latest version of Palm Desktop 6.2 and outlook 2007 and plug it in with my USB and click on the hot sync button. I get "driver software for your Palm Treo 680". My phone is a centro (I use a palm Treo 680 USB cord, but it worked on my last computer). It is said, insert the floppy disk provided with your phone, but the disk is not moving the problem at all. Any suggestions?

  What version of Vista?  32-bit or 64-bit?

  If 64-bit, you cannot synchronize via a cable.   There are number of threads of instruction at the top of this section relating to synchronization with Vista64.  One possible way is via BlueTooth or Infra-red...

  WyreNut

• HP Pavilion 14 inch laptop: Palm M500 hot sync with 8.1 Windows 64 bit

  I have installed my software Palm Pilot M500 (from the original factory CD) on my HP Pavillion Lap Top. However, the hot sync fails and I get the following message: selected The COM7 Port is not available.  Hot Sync Manager will open port when it becomes available. »

  Suggestions, how can it clears and the hot sync enabled?

  It is a system of exploitation of 64-bit Microsoft Windows 8.1.

  Thank you

  You will need to:

  1. install Palm Desktop 6.2.2 (search for one of Wyrenut sons, where he links to it, a recent reshuffle of the forums by HP removed the stickied thread that kept the top of this forum where it was easy to see);
  2. Install the Aceeca 64 bit drivers (also doing a search here for synchronization with windows 64-bit); and
  3. install PalmHotsyncSetup of www.pimlicosoftware.com , which should make your M500 more compatible with the latest Palm Desktop.

  Good luck.

• BlackBerry Smartphones trying to sync with Vista OS BB calendar: where is the Vista (like Outlook calendar) calendar

  I'm moving from an old XP computer to a new Vista computer.

  My Blackberry calendar used to sync with Outlook. Now I can't find Outlook on the new Vista pc.

  Is there a comparable to Outlook Vista calenar?

  Thank you.

  Desktop Manager only synchs with some applications in accordance with this article: http://www.blackberry.com/btsc/KB14730

  Windows calendar is not included in this list, sorry

  Alternatively, you can use google sync to synchronize your google calendar instead of buy Outlook.

• Hot Sync with Outlook

  Hi all

  I recently had to reinstall Outlook and now I can not preform a Hot Sync.  The message I get is unable to connect with Outlook.

  Any ideas what I am doing wrong?

  Try to move in sync with Palm Desktop then back to sync with Outlook.

  Message relates to: Palm Z22

• Palm Centro Bluetooth Sync with Vista 64-bit

  I just got a Palm Centro and went throughout the configuration both the Palm Centro and the PC to see each other.  I created a (COM5) virtual COM port and chose this port as my connection series.

  That's when he stops working.  By pressing the button on the Centro HotSync gives me the following error...

  Cannot start the HotSync operation because the port is in use by another application.

  This port has been created, how can it be used?

  Thank you, John

  Well, I found a solution.  After pairing between the phone and the PC and affect the virtual port, you must restart the computer.  Once I rebooted, the port was available and hot sync phone would be.

  Thank you, JOhn

  Message relates to: Palm Z22

• Hot Sync with MacBook / Bluetooth

  I get a message that Hot Sync cannot connect because Bluetooth is in use by another application.

  I turned off my router, printers, etc. and still get this message.

  I rebooted Palm Desktop - no help.

  Hello and thank you for using the Palm Help Forums!

  I would try to disable and then enable the bluetooth on the PC and PDA and then try again.

  Message is about: Treo 800w (Sprint)

• Palm TX is not sync with vista, please help

  null

  Hello and welcome to the Community Forums of Palm.

  The TX is synchronized with Vista, but you must download and install the new Palm Desktop 6.2, which is available on the support download link & above.

  But it works with Vista 32-bit desktop computers, desktops not 64 bit Vista.  If your Vista is the 64-bit version, you cannot synchronize with the USB cable and need to use Wi - Fi, Bluetooth or IR (infrared).  There is the son of stickied this forum dealing with all of these options.

  Message relates to: None

• HOt sync - Tungsten E2 for Vista

  I had hot, synchronization successfully for some time, although often when I turn on my laptop Vista out, the dates on the calendar disappear.  But as long as I could hot sync with my handheld, it was a minor inconvenience.  But now, apparently, something's wrong with my Pocket PC, because it won't hot sync on my Vista laptop or on our XP desktop (which we used to do).   He gets to the extent of the '2' on the date of transfer of book and then freezes.  When I cancel, also well on the computer and your handheld, it freezes and I have to turn both of them off the coast.  I tried a warm reboot, then a partial hard reset without success.  I hesitate to do a hard reset because I have years of dates on my handheld it is essential to keep.  I'm not aware that I changed the settings on the handheld when it used to work. What can I do?

  I don't know what happened, but when I went in Palm Desktop, this time, my schedule is back!

  Thank God!   Maybe the dbfix doing something after all.   Thanks for your help.

  Message relates to: Tungsten E2

• Hot sync and check for problems.

  Hi, I have just a basic knowledge of the treo and my pc. My pc has windows vista and has been hot sync with my treo680 without any hazzle. But recently, he stopped all hotsync. It shows just a last message to hot sync. I use the hot sync cradle but I can't launch it with the key. Another curious thing is that I can no longer use the search engine on the treo.

  I tried to disable the firewall; but it has not changed anything. Any other suggestions... Anyone who could me help out me. Thank you very much.

  Hello

  I'm starting to believe in miracles.  I have reinstall my old palm desktop version 4.2 with ver 4.1.2.  As part of the registration process I had to remove the battery and restart again palm treo.  This solves the problem and search function is thus restored.

  Thought that put this line for enemies like me.

• Centro cannot perform an initial synchronization with vista 64

  Well, I have this centro to verizon and a bluetooth adapter and the last access of Palm software. Everything is installed. Everything sees the other. But when I start the synchronization between the centro and the vista, it hangs on the Agenda second on the list of things that it syncs. It never advanced past this point and believe me, I HAV left "synchronization" for 45 minutes without change. Then I open the Task Manager and end task in frustration. BTW, the centro can synchronize with my XP and my palm TX bluetooth sync with vista. I have uninstalled and reinstalled software Acess and synchronizations of TX, but not the centro.

  What you're suggesting?

  Oh, I'm a simple girl, I need advice. Where can I find the book date leads to uncheck? I know that I found in the synchronization of verizon software and unchecked on the Agenda, addresses, media one and left only email. Which is probably stupid too since I use versamail and not their e-mail. But I'm not clear on how to proceed by unchecking the agenda and with which machine to do this and to place the dbfixt to run check the agenda. I guess it all must happen on the centro since it has alleged corruption? And a sidebar which is today, I could not cable sync on my XP work with the centro... with the same problem, I got on the vista home. So I tend to believe the Agenda corrupted on the theory of centro. Just not clear on how to proceed with the fixing. Thanks for your help.

  Message relates to: Centro (Verizon)

• Hot Sync freezes on the calendar... Centro (sprint) & Windows XP

  Hope you can help... have you tried most of the suggestions thread.   Hot Sync & Palm Desktop (v6.2) worked without problem.   Palm Desktop has suddenly didn't show no data in Contacts or calendar.   Subsequent attempts to Hot Sync froze during the synchronization of calendar.  After reading the discussion over there, I followed the procedures to uninstall Palm Desktop (including registry changes).  Re-install the v6.2 met Frost even during the first attempt to Hot Sync.   Uninstalled v6.2 new & re-installed only the older version of office provided on CD-ROM.   Same result during the first HotSync (a gel or a continuous loop during the calendar sync... no error codes displayed).  My unit features: Centro from Sprint with software v1.08 (operation without any problem).   Specifications of the PC: Windows XP Pro with Service Pack 2.   Hot sync with USB cable connection.

  Additional comments: my HotSync problem is now solved.   If you encounter a similar problem, please read the following threads for the solution.

  you have a corrupted calendar that is why, if hangs on the calendar/Agenda during hotsync

  You may need to use the DBfixit software on your phone...

  Message relates to: Centro (unlocked GSM)

• ZIRE 21 hot sync is not compatible with vista 64-bit program

  ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

  For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

  Laughing out loud

  You cannot change part of a 64 bit of Vista in 32-bit OS.

  32 bit and 64 bit OSs are completely different operating systems.

  See you soon.

  Mick Murphy - Microsoft partner