Hotstop Dell Wireless has stopped working

Similar Questions

• My dell support has stopped working, how to fix?

  My dell support has stopped working and I get a pop up message.  How should I do?

  If a Dell program does not work, contact Dell for help on the issue.

  http://support.Dell.com/

• Scroll wheel on the mouse Microsoft 3000 wireless has stopped working?

  I bought a Microsoft Wireless 3000 Mobile in purple mouse, manufacturer #6BA-0026 last month and now the wheel has stopped working. I can't move the mouse. Only the buttons work, this mouse is less, is about a month. Cannot take back to the store because they one day 14 return policy, so now I'm stuck with a mouse that doesn't work. Is it possible to get the scroll wheel to work. Using the button takes a lot more movement and it is easier to use the wheel. Why my mouse was working only for a month? Do I have to spend more money to buy another mouse? Is there some type of downloading software that I can use to make this mouse works correctly.

  Hello

  1. have you made changes on the computer before this problem?
  2. did you try to use the same mouse to different computer and check?

  Step 1: Run the fixit from the following article and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Uninstall and reinstall the software mouse and check.

• Dell Quickset has stopped working

  After installing latest bios (Dell Inspiron 5459/5559/5759 SKL system BIOS 1.2.4) published on 23/09/2016 my Quickset software has stopped working and when you try to uninstall or repair I get an error message "your computer BIOS is outdated. Please upgrade to the latest version of BIOS. "My laptop is Inspiron 5559 and latest updates and drivers are installed, everything is up-to-date.

  Problem is now solved with the last bios update installed, thank you.

• M40X: Wireless has stopped working

  Hello world

  Please can someone help. My wireless connection just stopped working. I have a Toshiba M40x, a router belkin g (F5D7231uk4) and my sevice provider is NTL. I checked with NTL and all is well. I took the cable that connects the modem to the router on the router and connected to my PC laptop and the internet works fine.

  I also reconected it cable and run another ethernet cable from the router to my laptop computer and again internet works fine. When I right click on the little icon wireless and research of wireless computer sometimes shows my router, but nothing happens when I click conect. External wireless switch is turned on.

  Please note that I'm not amazingly well with PCs, so answers in English would be fine.

  Hello

  @fraziola: Sorry, but I m bit confused. The ethernet cable is plugged in and you want to connect to the router via WiFi? Or you have disconnected the cable and then try to connect the router?
  However, in my opinion, you need to reconfigure the router. Check all the settings of the router. In addition, you will need to create a SSID.
  I put t know if you use a WLan configuration tool and more, but if not to check the properties of WLan. In the wireless network tab, you will find an option to use windows to configure my wireless, this option must be enabled.
  Then, you can use the lives option wireless networks.
  If you use encryption, then you must also enter a good code.

  Believe me, the WiFi network is a very complex issue and if you have no experience so ask someone who has more experience of these things.

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye

• Satellite A500 - 15N Wireless has stopped working

  I bought my A500-15N in last October and had no problems at all with wireless connectivity. Last night when I was surfing Internet it suddenly stopped working (literally between two pages on Wikipedia) and I can connect is no longer. When I try the troubleshooting option, I still see an error 'wireless capability is turned off. I not made any changes to my router or laptop, so I'm not sure what could be going wrong.

  Is the wireless adapter fuck and I need to get this replaced? I tried the combo FN + F8 but which does nothing either.

  Hey,.

  Is the WLAN card still listed in Device Manager correctly and have you tried another key FN if combination work?
  Usually the WLAN card can be disabled with the FN + F8 key combination you wrote

  In your case I would recommend updating the driver WLAN. You can download the latest driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite P100 - 429 LAN wireless has stopped working

  I had a satellite P100-429 during about three weeks, the wireless card was working fine until yesterday. Today I turned on the laptop, but I can't connect to my access point.

  In fact the laptop can now find any wireless network at all.

  Can anyone help?

  Have you checked the common things like a status of Wlan card in the device, the Wlan router configuration manager, etc...?
  Also check if the Wlan card switch is set to on. Further, you can try to fix the WiFi connection.
  To do something like that, he must go to "network connections", right click on the WiFi connection and choose repair.

  Do you use 3rd party WLan configuration software? If so, please check if the windows have configuration option WLan has not been activated.

• Why my laptop get message that dell support has stopped working?

  Why message 'dell support stopped work' keep coming on the screen of my laptop please?

  Hello

  you need to ask this question you have Dell problems with their software

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• Range Dell EqualLogic has stopped working when you restart the failure

  During and after an interruption of scheduled maintenance work, ESXi cannot mount on our Dell EqualLogic Array data warehouses and I have no idea why.

  We lack ESXi 5.0.  Shut down us throughout the weekend, replaced the network cables and when we returned to our ESXi hosts could not see the Bay EqualLogic iSCSI, but you could see several other berries on the same storage system iSCSI.  Digging into logs, I see the ESXi host making the CHAP authentication to the EqualLogic Bay, and the said table it connects successfully, then it loses connection about 10 seconds later.  10 seconds more ESXi tent reconnection to the EqualLogic and the same thing is happening again.

  I see several newspapers in ESXi hostd.log indicating this table goes ONLINE and off LINE and another line indicating "sense data Possible" leading me to http://KB.VMware.com/kb/289902 .  I feel really disabled at the moment because it's the Bay of storage accommodation our vCenter Server, which puts us in trouble right now.

  Also, if I try to "Add Storage", ESXi sees EqualLogic stores exist (watch a sufficient volume, size etc.).  However, as I'm trying to add them (via vSphere Client), step 1 takes a lot of time to finish, step 2 indicates the "disks are empty" (which I don't believe), then after an another long this timeout a popup error.

  Are there commands or utilities that are good for the diagnosis of iSCSI specifically?

  I can post more specific journal details if it is useful.

  PS - The new network cables are ok in communication with other storage targets, and it has not replaced the EqualLogic cables.

  Fixed; the MTU setting on my storage switch was mowing part of storage traffic.  Here are the troubleshooting steps that I went through, maybe it'll help someone else.  The solution didn't exactly have anything specific to do with ESXi or EqualLogic.  Basic troubleshooting and digging.

  Newspapers/events storage array inspection revealed he saw and accepted the ESXi host connection appempts.  I saw messages to the effect of:

  -Connection of ESXi iqn blah blah blah established; Successful CHAP authentication.

  -10 seconds later: Connection reset / abandoned by peers.

  -5 seconds later: ESXi connection successfully established...

  (rinse and repeat several times)

  Inspection of the file hostd.log ESXi showed several messages of 'connection reset by peer '.  The storage array and ESXi have been pointing to the other... so the switch is the only thing in the middle.

  Troubleshooting steps now:

  -using the vmkping ping on the table of the ESXi - success: vmkping 192.168.1.20

  -using the vmkping ping on the table of the ESXi with a size of 9000 (jumbo frame size): NO RESPONSE! : (vmkping) s 9000 192.168.100.20<-- this="" is="" where="" the="" money="" was="" for="" finding="" the="">

  MTU has been set at around 9000.  It turns out that the switch should be set a little higher (taking into account headers of packets? who knew)

  So this Setup ran for more than a year of intact working and just stopped when we took everything downstairs and brought it up.

• "Dell Dock has stopped working" - very annoying!

  MicrosoftInternetExplorer4 normal 0

  Hello

  I can't tell you how much time and effort that I spend trying to solve this problem, but it seems impossible.

  I bought an Inspiron 1525 laptop only 4 months ago and was very happy with the functionality of Dell Dock as it made life easier when you work with Office. It was until the Dell Dock bananas bleeding no longer works. This is quite annoying, because everytime I turn on the computer I get the error message about 5 times in a row! And when I try to send the error report I get another error! How frustrating...

  I tried to get rid of it and reinstall but it won't work.

  Called Dell and they told me, they offer no support for this and I would need to pay ££ for assistance.

  Now it's ridiculous! I'm not asking the software, 'Geniuses Dell' decided to install this piece of defective software in my machine and now refuses to provide assistance! Shame on you Dell!

  Well, if you are a user and having the same nightmare, please let me know if you have found a solution, I'll be very grateful and you can light a candle.

  

  My husband has a Dell Inspiron Zino HD, who had the same problem.  I went to www.delldock.com.  They have a free download for dell dock.  I did the download and fixed it in this computer.  No more error Dell Dock.  It's worth a try, and it's free.  Good luck.

• Re: Wireless has stopped working on my Equium L40 (PSL41E)

  Hi guys.

  With the help of my laptop wireless this morning and all was fine, then all of a sudden, it loses the connection.

  Tried different methods to restore the link, update driver downloaded but no luck.

  The wireless light on the front of the laptop no longer turns, so I was wondering if there was some kind of internal problem.

  I am house bound and rely heavily on my WiFi, so if someone could suggest a solution to the problem, or has any suggestions, which would be excellent, but please keep in mind, I'm not very technical interest, you may have to explain things in detail!

  Thanks for your help.

  Karl

  Hello!

  You have activated the WiFi connection with the hardware switch of the laptop? The switch is on?
  In addition you can disable/enable the WLAN function with the FN keys. Therefore, you must press FN + F8.

  And what driver have you installed? If you update the driver, you should look on the Toshiba WLAN portal. There, you can always find new driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye

• WRT54G wireless has stopped working

  I got a Linksys WRT54G for several years, and during this period, he worked a lot.  I use it last night, and all of a sudden, my internet connection come fall.  Initially I thought it was just a problem with my internet, but after a few determined troubleshooting my rooter is the problem.  I checked the following:

  1. the Internet works when the computer is directly connected to the modem.

  2. wireless works, can connect to the rooter configuration screen

  3. I can also connect to the rooter Setup screen when connected wireless

  Each device seems to work on its own, but when I put the rooter and modem together, I can't access the internet with a wired connection or wireless.  I have tried the following to fix:

  1 power bike all devices

  2 reset all cable connections

  3. reset to factory of rooter

  4. firmware re-installed.

  I am out of ideas and have the feeling that my rooter may be toast, but I would appreciate any suggestions.

  Who is your Internet service provider...?

  Have you power rolled all devices including the router and the modem of your network...?

  What is the ip address of the modem... get you?

• Satellite L300D - Wireless has stopped working.

  Hello

  I use the laptop connected to internet wireless very well for some time now, both at home (via a router) and at the University, but until recently, when I switched the laptop on and he ceased to connect to the internet.

  The icon in the taskbar indicates that it is connected to a network, but at the local level and does not connect to the internet, the wireless switch shows that it is on and if the button is the fn + f8.

  I contacted the technical support to the router, as I had initially some worries with it a fair all the time, but they seem to think that this is a problem that the laptop itself because it connects to the internet very well if the cable is connected to him directly, but when it was via the wireless, the router was not find the device at all.

  I was wondering if someone could give me a helping hand to sort out the situation.
  Thanks in advance.

  > The icon in the taskbar indicates that it is connected to a network, but only locally and does not connect to internet

  In this case the refresh IP address could help.
  If you want to note the same problem in the future and then start the console (using the CMD command), and then type the command: * ipconfig / renew *.

  Usually, this helps.
  In my case, it always helps!

• Wireless has stop working. Recently installed new Norton anitivirus program.

  Tremdnet 11 g TEW-452BRP

  Hello
  I suggest you try to disable the temporary security software and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  It will be useful.