Hotsync configuration to work with XTNDConnect PC connection with Lotus Organizer 6.1

Similar Questions

• BlackBerry Sync BB Curve with Lotus Organizer 6.1 smartphones?

  How I got to where I am:

  I tried to help my girlfriend to set up his new curve (8330 - Verizon) for synchronizing with Lotus Organizer 6.1.  (The system is a desktop computer Compaq running Windows XP Home).  The provided version of the Desktop (4.3) software does not support Organizer 6.x - at least it does not organizing as an option when trying to configure the synchronization PIM.  (RIM/blackberry are pretty stupid to drop compatibility with older software - how hard is it to continue to be able to read and write a single file format more?)  "And although the Organizer 6.1 is old, it is still sold by IBM because people like it even better than any other alternative).

  Reading some forum posts and other material on this site is look like 4.2 version of the desktop software working with the organiser, so I uninstalled 4.3 and installed 4.2.

  (Sign of bugginess 4.3: the wizard 'Remove Programs' hung during the uninstallation of version 4.3 - he has said it was uninstalling Roxio media software.)  What this has to do with the Destop Manager?  In any case, I had to put an end to the program and wenth through the registry by had then to remove references to the Blackberry Destop Manager.  After all this, 4.2 could install).

  But now it seems that the 4.2 version of the Blackberry Device Manager cannot recognize the Curve 8330 - he reports no Blackberry device is connected, even if it is plugged into the USB port.

  Issues related to the:

  1. is there actually a way to get the Desktop Manager 4.3 working with Lotus Organizer 6.1?  (If it offers Organizer 6.0 that will work too).

  2. otherwise, version 4.2 actually work with the Organizer 6.1?  If so, can I run version 4.2 of the Desktop Manager with version 4.3 of the Device Manager?  Where can I download just the Device Manager 4.3 without the Desktop Manager?

  I know after jumping through hoops a lot I was finally able to get my Blackberry Desktop talk to the Organizer 6.1 right now, but it was MUCH more difficult than it should be.  (And I think that was with older versions of the software BB).

  Thank you.

  You were on the right track, however, it will not correctly work with versions of BB Desktop Manager that do not include the built in Organizer conduit.

  I used the version 4.1.1 with a Curve 8320.

  Basically, when you have reached the point where the curve is not known is where the rub. Older versions do not have the driver USB of the curve under the package. I installed 4.3 who had the right drivers for the 8320. Once installed, I copied this installation usbrim.* files in a folder on the desktop.

  Uninstalled 4.3 and loaded Desktop Manager 4.1.1. Once installed, I copied the drivers usbrim.* in the desktop folder to their original location. Open the device upward and found Office Manager.

  You were close. I haven't tried with 4.2, but know that it works with 4.1.

  Dave

• HotSync of Palm TX with Lotus Notes

  My company has just changed to the rogue Outlook Notes and Hotsync does not work with Notes.  Is there a solution out there which synchronizes with Notes, for the calendar, contacts and tasks?

  Hello

  refer to this feedback on the forum!

  Just click on the link:Lotus Notes

  I hope this will help you!

  Message relates to: Palm TX

• Bug in Smartphones blackBerry desktop Manager 4.2 synchronizing with lotus Organizer 6.1 after add my computer to my domain name...

  Hello!

  Since a few days, we began the transfer of all of the computers on your new DC - AD 2008 R2.

  Today, we make a single user who use the Desktop Manager to synchronize a calendar blackberry to a calendar of lotus Organizer. After the migration of the computer. The user can now log on to the domain and all the great work.

  But when we try to sync the BB its does not work.

  We repair the installation of the office 4.2 on the session of field Manager and redetect the BB from usb to the pc.

  Windows xp sp3 when the user's connection in local mode, the BB and the synchronization works between organizing 6.1 and Office Manager. When I log into the domain of the user account.

  Desktop Manager 4.2 after repair, opens correctly and the BB SPINDLE is a detection on USB port

  I could go into the config sync configuration section the link between the organizer and BB.

  In the section to display the list of available applications to synchronize.

  If I choose the option to ascii file, I have a button to select the ascii file on the local drive or local network.

  But when I select the type of file in lotus organizer, the button Choose the .or6 is not available...

  This browse button is not in the local user account.

  I guess that's a Group Policy object or other things like that that block this option...

  I copy the folder "black berry" and "Research and motion" of the data folder of the application on my local user to my my domain user application data folder.

  After I have restart the Desktop Manager 4.2 on my domain on the computer user account.

  When the application start and open, his attempt to sync with BB, synchronization will find some files for the transfer, but the accident during the transfer.

  When I go on the synchronization configuration option to choose my .or6 file, now I find out the name of my file and lotus Organizer connector have a yellow arrow that one as my or6 file is create.

  But the Browse button is still not at the bottom of the configuration window.

  So I couldn't go for a new selection of my file.

  Normally this window gives the link information and the name of the file

  ex: c:\agenda\bob.or6

  Now, I find out only bob.or6 on my sync window...

  When I check in the synchronization log link

  I discovered the full link of my or6 files, and I discover that I have connect on it, try to read some information on the calendar. and a log file end with an error code. Sorry I don't remember the code and I forgot to take the code in the note...

  I'll post the code tomorrow morning.

  I think maybe it's rules, which are applicable by the DC on the computer which block access to the file in writing or another

  things like that. We add the domain of the user as a member of the administrator group, because the configuration of Desktop Manager 4.2 require it to start the Setup program and install the software...

  Someone has an idea of the problem?

  emarck

  

  I found the solution!

  This morning, I do the test install desktop manager 4.2 and my blackberry curve on a pc freshly up toward my area.  This pc has never seen a prior blackberry...

  For people who are interesting to do the same, I put here the step by step guide:

  1. If a blackberry is always on the client pc uninstall all software

  Uninstalling lotus Organizer 6.1

  uninstall the Desktop Manager 4.2

  and accept to clean all the files of configuration during the process.

  Remove the blackberry device in Device Manager

  2. update the pc on the domain if is not always do.

  3. connect with the domain on the pc user, and not with the local section!

  4. once the session is entirely built, out of them and log in the local session the user (if it is admin on the pc), or a local administrator user...

  Go to the management console to add to the computer administrator group, the domain user that use the blackberry.

  Disconnect you and relog on domain user session.

  5. now, we are ready to start the lotus Organizer 6.1

  6. start the Desktop Manager 4.2 Setup program may restart or not at the end.

  7. When Desktop Manager 4.2 Setup is complete, start the software

  After some time. Windows might be on the screen.

  8. connect the BB on the usb port of the pc, let windows detect the new hardware.

  On small Yvon, when windows detects a new hardware BB, you need to push the drivers for usb BB by the device

  Manager let windows to accept the installation of the BB,

  Best practice I find to do that, is to extract the drivers ubs since the original cd of blackberry.

  Because, if you put the cd of BB on the pc, he wants to start the Desktop Manager installation program include on the cd.

  This version is younger and does not work with 6.1 lotus Organizer, so the BB will be perfectly detect in windows, but when you try to change to version 4.2, you must uninstall the new and valuable pilots at the same time...

  You can find the drivers in the cab file on the BB installation cd.

  I'm Audrey curve and "BOLD" use the same drivers...

  9. the Organizer is now ready, DM 4.2 is running and your BB is detect and loans in the windows taskbar...

  Go to the DM 4.2 and detect your BB device, when it is detect and connect ready,.

  Go to the option synchronize, select your .or6 file and associate it. Browse Famouse could be

  present on the bottom of the windows when you select the format of lotus organizer file.

  When the configuration is complete, don't forget to check the box for automatic synchronization when users plug in the BB to the

  computer...

  10 test communication between BB and PC

  Normally is Dm4.2 is open and the or6 file is available on a local drive or a card reader, the communication could be a success!

  I hope this might help other people )

  Emarck

• Smartphones blackBerry sync with Lotus Organizer to Outlook migration

  For years I was syncing my BB, including the storm with my Lotus Organizer PIM, uses an earlier version of Desktop software. Recently, my time schedule of synchronization, so I finally had to bite the bullet and convert all my data of Outlook Organizer, I did, I think that properly. Then I did a sync with the latest Desktop and Outlook software. What's happened is that he created many entries of duplicate calendar and contacts of those on the BB. What I would do is to remove all my data, contacts, calendars, to do, etc, but not the applications that I have on the device, then re - sync and hopefully get that one set of data on the BB, is there a way to remove this information without deleting all the other modules that I have on the device? Thank you.

  Yes! This only deletes your device calendar data.

  1. Connect your BlackBerry to your PC via the USB port.
  2. Open the Desktop Manager.
  3. Click on backup and perform a full backup of your device before you proceed to the next step.
  4. Once that is complete, go back to backup/restore > advanced. You will see a left and right window, your right pane is your device data.
  5. Scroll the window for calendar data, so that the line is highlighted, and then click CLEAR below.

  Now, you can resynchronize your Outlook data on the device.

• try to configure wrt160N work with WRT600N

  the WRT600N doesn't have enough range in my house.  I bought a WRT160N to extend this.  Previously, I could use a Belkin 54 g without problem.

  The sowrtware set up for the 160N takes this to the top and then errors with 302 internal error when trying to configure this scenario.

  All the ideas I tried some of the messages when you have the associated routers Linksys wrt160N no, but no joy.  The wrt600N does not recognize the device.

  The firmware has been updated.

  any help gratefully received.

  A

  How you try to connect your router WRT160N WRT600N? As your WRT600N router is already set up and that his work, just install the Ethernet cable between the router Linksys WRT160N on LAN Port 1 and Port Lan WRT600N.

  Click here and follow the instructions how to set up 2 routers to each other.

• How can I get my RCA audio configuration to work with Apple TV 4?

  Hi all

  I have a 2.1 audio setup that uses RCA cables. You just bought gen Apple TV 4. Would like to know how to use my audio setup with gen 4 of Apple TV.

  Thank you!

  Jordan

  Apple TV does not directly support analog components from the 1st generation. The new model also fails a separate audio port (which was the optics on the 2nd and 3rd model). You would either need to use an audio port out your TV (assuming he has a) or buy a converter.

• First Elements 8 works with 10 Organizer

  My OS is Windows 7 64-bit. My computer exceeds the minimum system requirements for first Elements 8 (PRE-8) and Photoshiop Elements 10 (PSE, 10).

  Here's the background of my question. I offer you this in case some might wonder why I don't go to two PES 10 & 10 PRE.

  I initially installed first Elements 8 and Photoshop Elements 8 group purchases. Both have worked well for a long time, including successfully use first to edit AVCHD files taken with my Canon HS S200. Recently, I started to meet a problem printing in Photoshop Elements 8, which was not resolved by this Forum. I have concluded that to do with Photoshop Elements is not no upgrade but to delete my pictures and PSE8. completely from my computer then I will install 10 PSE. and restore from my PSE 8 upwards.  I propose to also install the PREVIOUS 10 because if it isn't broke don't try to fix it.

  PSE 8 uninstalling Adobe document advises the removal of the two files. One is C:\Program Files\Adobe \Photoshop Elements 8.0 and the other is C:\Program Files\Adobe\Elements organizing 8.0.

  I've never used Organizer with 8 PRE.

  I guess the installation of 10 PSE will create a folder C:\Program Files\Adobe\Elements Organizer 10.

  The procedures above, including the installation of 10 instead of the Organizer Organizer 8 have implications for the successful operation of PRE 8?

  Miceal,

  Yes, pre will be a separate installation for each version of the program, so that nothing is replaced, and we can have several versions, they coexist on the computer. It is the way it is, with most of the Adobe software. This allows you to complete projects, started in earlier versions, or allow you to use a version of old, familiar, as they learn a newer version.

  Good luck

  Hunt

• Canon IP3500 printer works with Windows7 64 bit, but I can't make it work with my 32 bit Vista on a network computer.

  This configuration has worked with the previous XP machine in a network with Vista machine. After that replaces the xp machine, which is directly connected to the (now 7 machine) XP vista machine sees the printer but will not work. I get an error message indicating that the print server software does not work. I tried to install the driver on the machine 7 under x 86 drivers, but it fails to install. So in conclusion works-printing printer with Windows7 machine, but do not print when you try to send a print job using the vista across the network machine.

  Hi roboref,

  You will need to check if the file and printer sharing is enabled on the Windows 7 computer.

  To turn on file and printer sharing

   

  (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  (b) to expand the current network profile, click the chevron.

  (c) if printer sharing is off, under file sharing and printers, select Open file and printer sharing, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information please visit the link below.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How config FCoe to work with esx4.1 and CISCO?

  Hello

  I installed a server esx 4.1 intended to test and we want to configure to work with FCoe.

  The Esx has a Qlogic 10 G card to do this, we have a problem with our network team.

  The cards are regognized as vmnic and my HC is on them, but we now want to make the connection on the

  Cisco side so that I could also see the storage.

  Is there a manual for config this thing on both sides? VMware and CISCO?

  is there something special, that I need the config on my side?

  I did not FCoE with Cisco, but I made many configurations with Brocade/VMware & Qlogic FCoE. It works like a charm. In this case, everything I do is:

  (1) plug the Qlogic card to the server & get the vmnic up & working with qlogic drivers (I think you are finished with this step, if you have not mentioned about installing qla & pilots qlge on the box of ESX. You all TWO qlge & qla drivers for the Qlogic fcoe card)

  (2) after step 1, you should be ready for the FCoE, you don't have to do anything once the ESX box came.

  (3) a last step to the area both the FCoE (QLogic) adapter with your target of FCoE in your Cisco box. With Brocade switches, all I have to do is:

  (i) set up the port connected as a "fcoeport" to get the connected port

  (II) create a box with 2 WWN & add this area to the cfg, & activate this cfg. That's all.

  I feel that you do not "installed the qlogic drivers (qlge & qla in ESX yet), just in case if you have not, here is the driver names you need (doesn't have to be exact, just look for the part"qlge"&"qla"):"

  VMware-ESX-drivers-net-qlge_400.1.0.0.39-1.0.4.00000.265875.ISO*

  VMware-ESX-drivers-SCSI-qla2xxx_400.832.K1.27.1-1vmw.2.17.00000.291979.ISO*

• Safe on Etherchanel / 802.3ad, it works with vmware esx?

  Trunk etherchanel in cisco switch configuration, it works with vmware esx?

  Configuration of the Cisco switch like that (I don't have a switch, can not test it):

  src-dst-ip port-channel load-balance
  the interface vlan 4094
  no ip address
  Interface Port - Channel 1
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  interface GigabitEthernet1/1
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  Chanel-Group 1 mode on
  interface GigabitEthernet1/2
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  Chanel-Group 1 mode on
  end

  What you have should work OK, because it is not too different from the example of work from my lab:

  ocs4948-1 #sh int item in gi1/2nd round

  Building configuration...

  Current configuration: 536 bytes
  !
  interface GigabitEthernet1/2
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  channel-group 64 mode on
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh run int item in gi1/6

  Building configuration...

  Current configuration: 536 bytes
  !
  interface GigabitEthernet1/6
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  channel-group 64 mode on
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh run int in64

  Building configuration...
  Current configuration: 291 bytes
  !
  Interface Port-channel64
  Description esx402 LACP link
  switchport
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  load-interval 30
  Storm-control broadcasts 5.00
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh int trunk

  VLAN Mode Encapsulation native port State
  In64 on 802. 1 q trunking 1

  Port VLAN allowed on trunk
  In64 2.10

  Port VLAN authorized and active in the field of management
  In64 2.10

  VLAN port extending on transmission State and no tree pruned
  In64 2.10

  The only thing to look at will be the VLANs that you got set up on the vSwitch. You have defined VLAN native example, the VLAN untagged on the switch to be 4094, any traffic sent on the aura tags trunk VLAN, which will be removed by the vSwitch.

  In my setup, I have established groups of ports using VLANS and VLAN 2 10. Traffic to the virtual machines on these VLANs are .1Q marked by the physical switch, which is then stripped by the vSwitch.

  Take a look at the section "VLAN in VMware Infrastructure" on page 7 the concepts of virtual networking André already mentioned, but also the other interesting reading material is http://www.vmware.com/pdf/esx3_vlan_wp.pdf.

  Finally, for the side of the switch of things, look at the examples on Scott Lowe's blog at http://blog.scottlowe.org/2006/12/04/esx-server-nic-teaming-and-vlan-trunking/.

  Concerning

• BlackBerry Smartphones new update S/W for 8900 blocks Desktop manager with Lotus Notes Calendar

  I am using Notes 8.0.2 and using the Desktop Manager to synchronize contacts and calendar.

  After the upgrade of your handheld S/W, released last week, the Desktop Manager synchronization crashes when it tries to read the lotus notes calendar. For this, the address book with no problems, but when it starts to read the calendar notes, it crashes.

  I have used other sync software that accesses the calendar notes just to check my notes calendar was not inaccessible for any reason whatsoever and that worked well.

  If it's a version management issues with Notes 8.0.2 is there a way I can go back to the previous version of the portable software that works well so far? Otherwise, any suggestions to solve this problem?

  I'm done deleted my calendar on the device by following the instructions on this thread http://supportforums.blackberry.com/rim/board/message?board.id=8900&thread.id=403

  After that, my two-way synchronization now works with Lotus Notes Calendar.

• Satellite C55: microphone does not work with the connected headphones

  Hey everybody,

  I have a Toshiba Satellite C55. I've seen other forums posted on this topic, but none of the solutions seem to work for me. I tried to uninstall the drivers and restart the computer, and configure the microphone when the headphones are connected.

  My microphone (installed on the laptop) works completely fine... until I have plug in my headphones. He stops working, but I can still hear the music or friends through my headphones. They have a regular pair of Sony headphones, not headphones, so they do not have a microphone on them or anything. My microphone has never worked with the headphones plugged in, and the computer is only a few months old. I would really appreciate a clear solution, thank you for taking the time to look!

  What Satellite C55 do you have exactly?

  This laptop does support that one socket for headset and microphone, or you have two different plugs: one for mic and one for headphones?

  Usually, you can check the playback (speakers, headphones) devices and recording devices (microphone and external microphone) in the control panel → sound → playback (or recording) tab

  If you need to check if the internal MIC is set as device by default when the headphones are connected.

  In the event that the laptop uses the Realtek audio driver
  Reach
  Control Panel → Manager Realtek HD Audio → select Mic tab → click Device avancΘs
  Then select option button separate all entries in the independent input devices.
  Click OK
  Speakers of tray right click (Volume) then the recorders (confirm the microphone is active) → select microphone → click on set default (default device)
  Then close

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.