Household connection

Similar Questions

• HP Pavilion DV7-1444us Replace wireless card

  I recently updated my HP from Windows Vista to Windows 8. 1. the software works very well but I started having problems connecting to my Modum Cisco home through the Cox cable connection.  The computer worked fine for a few weeks then I had to miss the Modum for a short period of connection successfully until he finally stopped the connection.  A newer Dell computer in our household connects every time.  Is my connection problem, a bad wireless card or software associated with the upgrade of the software?  If it is a bad card, what is the DECA wireless recommended to buy with the part number and can engineer but not a computer experienced person like me, proceed with the installation?  Thanks, gh

  Hi 393871345,
  
  Welcome to the HP Forums!
  
  This wireless problem could be caused by the failure of hardware or software. Now, you can go through the steps to exclude the possibilities of the cause.
  
  (1) not having this problem with the laptop before upgrading to Windows 8.1?
  
  (2) when you upgrade to 8.1 Windows, did you follow all of the HP and Windows updates?
  
  To be able to test the unit itself, I suggest the document following "tests to material (Windows 7, Vista) failures. Please select the control using HP PC Hardware Diagnostics UEFIoption and then select the option for the Component Tests. Under component Tests, you will see an option for the Wireless Module. The Wireless Module passes all the tests?
  
  Now I'm longer lines that it is a software problem, compared to a hardware problem. After checking what Windows operating systems are supported by HP (on your laptop), the higher operating system that is supported, is Windows 7. As you have upgraded beyond this, you may be able to find the driver updated, you need the component manufacturer.
  
  To find out the manufacturer of the wireless component, you can always check for the name of the manufacturer's Device Manager. Once you don't have the name, you can visit the Web site of the manufacturers for available updates.
  
  Please let me know the results of the above steps.

• Equium M50-216 wireless questions

  Hard drive reformatted a new weeks back.
  When the computer has restarted, no wireless network could be found.

  The problem seems to be the other portable wireless laptop in the household connect OK
  The wireless switch is in position 'works', but the orange light does not "lights".

  Is this a problem with the wireless driver?

  Someone at - it help him?

  Thank you

  Hello

  The wireless network card is recognized correctly in the Device Manager?
  If this isn't the case, then the WLan driver must be installed!

  Also, check if the WiFi network has been configured correctly.
  Means that you must check the type of encryption, password encryption, and firewall settings.

  Good luck

• I have wireless internet in my house, and while others in my household have no problem, my internet connection keeps falling.

  For this reason, in my view, there is a problem with my netbook and not the router and do not want to touch the router I can help him like the Xbox, and other laptops are not affected. I updated the driver for the wireless adapter on my netbook but still not the problem, especially at night or when using Skype. What can I do to fix this problem? Would be really grateful for any help received thanks :)

  Hi DebbieClarke,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If the previous step fails, then I suggest you temporary disable the security software on the computer and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Internet connection with wi - fi in a household with wi - fi, installed on another computer at home

  I have an Omni200-5320 all-in-one PC using broadband connected via a wi - fi router.

  I'll go to stay with someone for 5 months and this person already has a wi - fi connection.

  I'll be able to connect to internet via WiFi to my friend the way in the same way as the use of a laptop.

  or do I need to connect my computer to a phone line? Or something else?

  Can someone help me with this please.

  Hi ozinnz,

  You will be able to connect via wifi. Your PC is equipped with a wireless network adapter.

  You will need to enter a password to connect.

  Please see here for more information about connecting to a wireless network

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

• IOS 10.0.2 WiFi not connecting

  Hello

  This morning, I had a problem with my IPad 4 (MK6J2B/A) and my Iphone 6s (MKQN2B/A).

  Both devices unloaded during the night and the charge in the morning, both devices would not connect to my WiFi (BT Home Hub 6) even though they have both been previously connected to my WiFi for weeks. Both have a checkmark beside the connection, but not the WiFi icon in the upper left corner. Safari says not connected to the internet. I tried several thing, like plane, reset BT Hub etc., but both have refused to sign. I did a reset on both devices and the Iphone came back and logged in as normal. However, the Ipad has refused to connect or at least with the WiFi icon.

  Surfing on the net and found a large number of people with the same problems. Followed suggestions, as I forgot network password and enter again, reset network etc, but nothing has worked. The only option to reset the whole device and start again. BUT when I tried to remove and delete, of course has been asked to enter my Apple ID to continue. No internet so would not remove.

  I have a hotspot Wifi BT close to home then I connected with that and she. This should make me stop and think that it was something inside the House, but once again, SO I continued and deleted the IPad. From the start of my cool Ipad, follow the instructions until it is necessary to connect to the internet. Had even a tick but no icon of Wifi and no internet, so no way to rebuild or restore my Ipad. SCREAMMMMMMMMMMMMM.

  Out the laptop to rebuild through iTunes, which was obsolete, then click on update and google in the meantime, no problems with the iPad, but with iPad connection to BT Home hub 6. Found a very small post with similar problems and he said to disconnect the hub (WIRED) AppleTV. As soon as I pulled the plug on the AppleTV my iPad connected instantly.

  Wow what a waste of two hours of my life. Don't know if it's hub problem AppleTV or BT, or both, but my AppleTV is now to stay on the WiFi connection and NO cable connection in the future.

  Hope that my pain will help someone else to solve the same problems.

  So thank you for much for this!

  I had this thing this morning, 1 iPad a household of 6 different devices does not connect.  My Apple TV has been connected via WIFI, I just turned off of Apple TV - box and connected iPad itself.

  This happened only a day after the installation of a HomeHu6...

• iPhone 6 does not connect to some wifi routers

  Hi gurus of the Forum.

  I hope someone can help with this weird wifi problem I have on an iPhone 6. The phone is running iOS 9.2.1 (latest version) and I'm in the United Kingdom. The phone has been connected to my home router, which is a Hub of sky and works well, I hung up for 5 minutes and then went back to it and the wifi connection was gone. I tried to reconnect and he would not find the router. I've tried everything to fix the problem but no luck. Now here's the weird thing in the household, we have another iPhone 6 (iOS 9.2.1), a 5 s iPhone (iOS 9.2.1), 2 x iPads, MacBook Air, and all these have no problem of wireless connection to the router (Sky hub) and connect to the internet.

  In my investigations (using neighbor routers, public routers, etc.), I discovered that the phone does not detect blank sky hubs hubs, hubs of Talk Talk, an iPhone 6 set up as a personal hotspot. Wifi looking for networks but not found. However, the phone WILL find and connect to networks and hubs BT so I know that the phone's wifi works perfectly OK.

  To try to solve the problem, I did the following: -.

  1 reset the phone (hold down Home and Power)

  2 reset the router

  3 reset the 'network settings' on the phone.

  4 erased the phone and set up as a new phone (still will not find the router)

  5 restore an old backup.

  6 disabled 'assistance to wifi '.

  7 disabled "wifi network" under the heading Privacy > sites > System Services.

  8A tried to manually enter the SSID and password of the router on the phone.

  9. manually entered the device and wifi MAC address of the router

  10. banged my head against a brick wall - has not helped and I had a sore :-) head

  So in my opinion, I tried everything what can be done to solve this problem, but nothing helped, so I come to the community to beg for help.

  I read something about iOS 9.2.1 having wifi problems, but I will reiterate, the phone was working fine and then stopped without reason. I have also other phones running 9.2.1 with no problems.

  Please help as my head becomes painful overall hit.

  Thank you very much in anticipation

  Steve

  PS please don't waste your time and your mine responds telling me to do the things that I've done - thanks.

  Hello

  Anyone have any ideas? I am all of them.

  Thank you

  Steve

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• Satellite Pro A100 - unable to connect to the internet

  I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
  I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
  I checked all the settings, but to no avail.

  Can anyone suggest anything that could restore the balance of my household!

  How have you tried to connect the laptop to the router?
  A you connect using a LAN cable?

  Are the firewall enabled?

  Please publish more details!

• Apple TV 3rd gen: WiFi Internet connection is not stable.

  If I success to connect to WiFi after a few hours cut. After that, it is impossible to reconnect.

  Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but won't make iStumbler household items.

  Refer to your router manual to know how to change your wifi channel or adjust your pace of multicast.

  There are other types of problems that can affect the networks, but it is by far the most common, so note the first. We see networks that have inherent problems work differently with different versions of the same software. You can also try to move the Apple TV away from other electrical devices.

  The following article can help you.

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  Sources of interference

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Problems of sudden wireless connectivity with Qosmio G10

  I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

  Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

  Initially, the problem could be solved by restarting the computer and the router.

  Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

  Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

  I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

  I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

  Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

  Can someone please help?

  Why use the CnfigFree tool to connect to the WLan?
  According to your message, you are using the Intel card.
  I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

  > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
  I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

  However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

• Linksys connection shows poor all the time

  When I check my status on my connection why you say poor all the time? I also noticed that there are others that are related to my linkskys and my connection is always ' say poor. How can I get a better connection? Thank you

  Hello

  You really need to be checked in the forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------

  It is more connected to your router that are not in your household? If so, you will need to
  reset the router security. All unauthorized connections are the security risks and also use
  your connection resource. Check with the manufacturer of the router.

  Distance and other interference can affect the quality of the connection. Also check updates
  your WiFi and NIC drivers.

  LinkSys has support and excellent help. Also check the LinkSys forums.

  LinkSys support
  http://homesupport.Cisco.com/en-us/Wireless/Linksys

  LinkSys forums
  http://homecommunity.Cisco.com/community/?category.ID=Linksys

  ==================================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ====================================================

  After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
  fact that you can do if you first use).

  Follow these steps:

  Control Panel - network - write down of the brand and the model of the Wifi - double click - top
  tab of the driver - write version - click on update driver (can't do anything like MS
  is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
  -Reboot - it will refresh the driver stack.

  If necessary to download drivers on another machine and transfer on the problem computer via
  removable media such as a USB key or CD - DVD.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet in Vista (and Windows 7)
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• Internet connections with 8.1

  My HP Pavilion Touchsmart (model #14 - b124us) recently updated itself windows 8.1. I can't access the internet now, although my wifi works. (another household laptop and tablet together to connect) It only shows limited connectivity or none, continues to go back, but I can't access anything whatsoever. I read some of the forums on this problem, but I'm not as tech savy as most here and should be explicit procedure step by step sent me if she understood the update of a driver, etc. Please let me know if you can help!

  Donna

  Hi@dmz1123,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion TouchSmart 14 - b124us Sleekbook and problems with your Internet connection and your update with the 8.1 Windows updates. Here is a link to the reconnection wireless for my laptop.

  Please let me know how it goes.

  Thank you.

• Problems sending/receiving mail - error number: 0x800CCC0E - "the connection to the server has failed..." »

  De : Briangie

  I've been out of town for a few days. I was using a public Wi - Fi connection to my laptop. The first part of the week worked fine, but now using the same wireless connection, I receive the following error message. Has happened since yesterday afternoon 03/10/08 and today is 05/10/08. What is the problem? Help, please!

  The connection to the server has failed. Account: 'mail.charter.net', server: 'mail.charter.net', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  From: Gary van

  In Windows Mail, go to the tolls, accounts, select the account mail.charter.net, properties, advanced. Change the port number for the incoming (POP3) server from 995 to 110. Make sure that the adjacent SSL option is not checked. Click OK.

  As a general rule, the owner of the SMTP server must be the same that provides your Internet connection at the moment.

  The workarounds available when sending abroad are the following:

  1. use webmail to send (via your browser).
  2. ask your ISP if they have one port other than '25' for SMTP. I do not think that
  Charter of fact. Cable companies are very difficult to accommodate travellers.
  3. If you frequently use the same connection away from home, replace the SMTP Protocol
  Server in this respect. It's a little tricky, but if you want to go this route.
  I can provide more details.
  4. If you frequently send to multiple locations, get a free Gmail account,
  Configure it to POP access and use for your shipment of household chores.
  Gmail uses port 465 for SMTP, which is not blocked as is port 25.

  
  Another response of the community of Windows Vista discussion groups

• To connect via PPPoE (dialer) Wireless ADSL

  Hello

  I have a WAG200G Annex-A Wireless G modem router ADSL residential, I used as a wireless router. Now I've changed suppliers (Auntie Indicom - in India), and they have a 'new technology '. Basically, instead of giving me a DSL line in my house, now they directly give me an Ethernet cable in my house (they have a local DSL box somewhere on the roof with various Cisco switches for each household). Then, they want to connect via PPPoE by starting a Dialer on my computer, this particular Ethernet cable is connected.

  Now, that works all very well, but we have more than one computer at home, and I would like to use Wifi instead of being connected at all times via the cable on my laptop.

  So now my question is:

  Can I configure the Linksys router so that IT don't the PPPoE dial for me? Basically this means plug the Ethernet cable provided by my ISP in one of the ETHERNET Ports and set up allowing to switch on (since there is no cable "line" adsl connected more) with my user name and password.

  Anyone know how to do this, or if this is possible?

  Thank you!

  P.s.: I've set up the Internet connection sharing via ad-hoc wireless, which works very well, but is only a temporary solution because I don't want to use my laptop as a router...

  It is not possible to configure WAG200G without ADSL line.