Problems of sudden wireless connectivity with Qosmio G10

Similar Questions

• Problem with wireless connection with HP 3070 B611

  I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

  How to change IP address of the printer in the 192.168.0.XXX range?

  It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

  You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• Wireless connection on Qosmio F20: limited or no connectivity

  Have problem with the Wi - Fi connection, which States that I have little or no connectivity with my netgear wireless router.
  Works very well with the ethernet cable connected but as soon as I disconnect cable, loses internet.
  What I am doing wrong?

  I'm sure that you don't do anything wrong. I yesterday preinstalled recovery image on my Qosmio G30. two partitions with WXP and Vista. When I run two operating systems, I got the same message. Attached to the State and the very good Wi - Fi signal but I don't WAN not able to see any page on IE.

  After awhile, I was so desperate and just reboot the router and guess after doing this that I was able to use the WLAN in the two operating systems. Try to do the same thing. Maybe the help!

• Mac cannot establish a wireless connection with printer

  I recently bought a HP ENVY 5530 printer to use in my home network. I took it successfully up to 2 Macbooks and the installer worked for about a week.  All of a sudden, no computer can connect to the printer. Laptops use OS X 10.6.8 and other 10.9.5.

  I started in case of reset problem, printing systems, repair disk permissions and then uninstalled and reinstalled the printer software. still no luck. The results of the test the State of 5530 wireless network found no problems and it is connected to the correct network. Laptops are on the correct network as well. Laptops don't seem to be able to "see" the printer.

  Where should I go from here?

  Hi @0okm ,.

  Thank you for visiting the Forums HP's Support and welcome. Thanks for the detailed information he is appreciated.

  Looks like you all did for the printer HP ENVY 5530 and your Mac to resolve wireless printing.

  Try this fix for the router, because it seems that it is the last thing to do.

  Disconnect the power supply to your router and modem and turn off your Mac
  Wait at least 45 seconds.
  Plug in the modem and wait for it to come back online.
  Plug in the router and wait for it to come back online.
  Turn on your Mac and try to install it again.

  If this does not solve your problem here is a document on setting up the printer HP with a Mac.

  Please let me know how it goes.

  Thank you.

• Wireless connection fails on G10 after changing the motherboard

  I had a few problems with my wireless for quite awhile. Basically, whenever I turn on my pc my internet connection fails. I always do an RSP on my wireless connection. Finally, it works. This problem started when a technician has changed my motherboard to another question. Since then, it has changed my wireless card. The problem remains tho. Is there a patch for this?

  Hello

  Is your wireless network, Intel 2200BG If yes try to download the software for this www.intel.com. It is if you have a connection. Another thing to try is to go to the properties of the wireless card and make sure that the power supply is set to high and the output amplifier is set to enabled.

  It could be a mix up with the router by which DHCP not allocate an IP address that is inappropriate. You can go into the router through the admin option and disable this feature. However, you will need to return the laptop an IP address. Click on network connections and click with the right button on the wireless connection properties. You should see the list Internet TCP/Ip Protocol. Double click and assign the IP address manually. You must also enter the other info that can by typing ipconfig in the folder c: / prompt.

  HTH
  Norskman

• Wireless connection with HP7410 xi

  I have a HP Envy m6 with Windows 8.1.   I rebooted the HP Solution Center and the software of HP7410 a couple of times.  I'll be able to connect wirelessly for a while, then the next day, cannot.  All the drivers look right, the IP addresses of the ports that all look... what happens?

  Hi it is @ TK4GT, welcome to the forums!

  I'm sorry to hear the issues you had with your 7410xi not to connect to your network. I' that my suggestion offer you, which I hope to get rid of the problem.

  Please follow these steps to keep the connection: printer does not maintain the wireless connection

  All the best,

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• wireless connection with the unidentified network

  Hello

  I have recently moved house and who to connect my computer to the wireless network that we installed. He works to connect said however that the network is 'unidentified' and I can't connect to the internet. I tried to diagnose the problem, but nothing seems to work. There is nothing wrong with the router, because it works with all other computers in the House except our HP computers two and it works whenever I connect with the cable, but not wifi.

  I've had the laptop for about 5 years now.

  Computer: HP Pavilion DV6824eo PC entertainment network

  Operating system: Windows Vista 32-bit

  I would be very happy if someone could help me with this!

  Lovisa

  I managed to fix everything at the time, had to download the latest version of the WLAN ahteros driver.

  Thank you very much!

• Slow wireless connectivity with WRT54GS

  If I connect to the router with a LAN, I get ~ 63Mbps, but whenever I try to go wireless, the speed goes down between 12-15Mbps (at best). There is no update of the firmware for the router, and I am at a loss to the extent where how to get the best speed via a wireless connection. FYI, I have security WPA2 value, but I don't seem to lose a lot of speed (as appropriate) as a result of the security is enabled. I REALLY want to get the best speed via a wireless connection, but I am fairly new to try to figure out what kind of things networking, any help would be appreciated!

  The router is capable of speed of wireless connection reaching up to 54 Mbps. With today's ' Smart' technology, it would be a smart move, upgrade to a new router. Get a N router, if this isn't an AC, rather than keep the G one.

• Bad wireless connection with wireless router. UN plug the router and plug it back and connection ok. Do this sometimes 2 or three times. Some time its ok.

  Set up a wireless connection from the laptop to my router upstairs and scia, we have that we have most of the time to kill the power to the router to reset the connection to the laptop. What anyone know or had this problem?

  And his age? If more two years, replace it. MS - MVP - Elephant Boy computers - don't panic!

• 4500 wireless connects with 2 systems but not a third party.

  All of the recommendations noted in all HP sites were conducted.  Gets the path looking for connection test

  but then fails at the end.  I've uninstalled and reinstalled the software several times.

  I have disabled the firewall (firewall even on other systems).   Printer can be seen by web access, and

  is configured correctly.  Have it connected to the third system now via USB.   System is running XP sp3 with

  the latest from MS and all the updates from HP. (HP system).  Other systems that work are a laptop

  with XP and a Vista system.   With the exception of the laptop that is wireless, other systems connect through

  a switch to a D-link router Dir 655 B.   Note that you can have the USB connection or wireless connection in even

  time on this printer.  Any ideas?   And please do not repeat the most obvious of which have already been addressed.

  (Note I work on computers for more than 40 years and know the networks, etc., etc.)

  Thank you.

  Don't know why, but just to the dickens, have you a device add tonight, after a few days with

  the PC race, print to the printer via the USB port.   Added the printer wireless, and she said very well...

  No changes to the system, etc., etc...

  So now have the printer installed twice on this system - USB and wireless.

  Would be nice if the installer fails he looks a why...

  Thank you all anyway.

• Wireless connection with my Equium L20

  Hello

  I recently bought an equium L20.

  I didn't know he had wirless, I use wanadoo wireless and talk and currently plugin a wireless adapter for access internet.
  When I put on the L20 it has detected my wireless connection but I can't connect to internet because it rpet aqquiring network address, but nothing more.
  I have to buy a card or something?
  Sorry to be thick but it's all new to me...

  Hello Nicola

  Please visit this page on http://www.windowsnetworking.com/j_helmig/wlan.htm WLAN. Very simply, it is described how you configure your WLAN network.

  Your device has a wireless card and you do not need to buy something.

  Good luck and if you have more questions please write again.

• No satellite P300 - 18 M no wireless connection with Win XP Pro

  Hello people!

  I recently bought a P300 - 18M and installed Windows XP Pro SP3 on it. Everything works fine except the wireless connection. He know the switch for wireless connection is disabled because it is not all networks, although the switch is on and the wireless LED is lit.

  I checked the FN + F8 keyboard shortcut, I chose wireless only here...

  I downloaded the Intel drivers latest 5400 for the network card, but it is always no network :(

  Who can help out me?

  Hosts the Netherlands, Leon

  Hello

  There is also a WLan switch on the side of s for laptop.
  This switch must be activated also.

  Please check this!

  In addition, you can consult the WLan card properties in Device Manager.
  There should be an Advanced tab.

  There are different parameters, you should check out. For example, you can choose different WiFi standards such as 802.11 A B G, etc.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.