How audit user when is plugged into the application database

Similar Questions

• Time machine automatically upwards a WD passport when its plugged into the machine of time rather than the macbook?

  Hello

  I have a Macbook Pro with a WD passport for mac that I keep all my photos on.  I know that time machine will back up there if I plug it into the mac and select it to be excluded from the United Nations through the time machine preferences, which I did, but I generally keep the Passport plugged into the time machine itself and use wireless.

  However, I don't really know if time machine is it backs up this way, or if it's just a wireless router that allows me to access the Passport.

  How will I know if it is saved?  And if not, how can I save it while it is plugged into the time machine?

  Unfortunately, it seems as if you are confused about the terms of Time Machine and Time Capsule.

  Time Machine is a software on your Mac, which is used to back up your Mac hard disk... like a Time Capsule

  A Time Capsule is material... more precisely a wireless router with a built-in hard drive that can be used to store backups Time Machine .

  With this information in mind, can clarify you what it is you want to do?

• Add a tag to when they fell into the Applications folder

  Hello

  I want to add tags to my applications for categorization when I drop them into the Applications folder. In my way of novice, I created a folder Automator action where I add Spotlight comments to the app, but that's not what I want to do, I want to label it. The only other option is aimed at Finder label but that gives you just seven color options. I want to have a promt asking me what tag I want to attribute to the request, exactly as it does for the Spotlight comment action. Is this possible with Automator or should I look elsewhere, like AppleScript?

  I have two solutions to bypass, where the first is a combination of Automator and Hazel (probably consume more memory) where I use the Spotlight comment action in Automator and then let Hazel tag of the file via a dynamic tag (comment Spotlight under 'other' element of choice). But it is almost useless, because if I just replace an existing file, the workflow is not triggered, in this case only if a new file is added. How can I make the workflow work on new and existing files? The same thing happens when I use the alternative workaround, I integrate Quicksilver in an Automator workflow to send the item (file) to Quicksilver if I where he can score. Any suggestion is welcome!

  Thanks in advance!

  With or without Automator, AppleScript script would be the way to go.  You'll have the same problem with actions folder be it, however, they are only triggered when a component is added to a watched folder.

  You can use the URL of cocoa class to add your tags - this topic of the mailing list has the script library routines (note that you can use directly in a script of El Capitan).

• Turn off the music when I plug into the speaker / earphone cord

  Turn off the music when I plug speake / headphones cord. Have to unplug to get the music to play again.

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data, but it can cure a few glitches.

  Usually the music stops if you unplug the headphones to the device, and you have to press 'play' again to keep listening via the external speaker.

  If you use the external speaker and plug in the headphones, the song doesn't stop and continues to play through headphones. Just tried it with my camera.

• How do MANUALLY enter you data into the application of health 10 IOS? There is no symbol and touch edit only gives you the option to delete existing data.

  I checked in the application of the health and read the Apple support page. They show the screen for 10 IOS on an iPhone, but their instructions don't work. There is not a Plus symbol to add data manually. It has only an editing tool that you can touch and only allows you to delete data.

  Hi, rmetzker!

  To manually enter the data points in the application of health, first go to the display of data on health as shown below.

  

  Then select category to which you want to enter data in (I'll use body measurements for example), then press on what data you enter (measurements > weight). In the upper right corner, it will be a plus + icon for you to manually enter your own data points.

  

  I hope this helps!

• iPad tells me "Not Charging" when plugged into the docking station

  It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?

  There seems to be something that is changed with iOS modified 10 power requirements for the load.

  No idea when or if things will change, so all users can make use of the work load by plugging into the wall.

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• Smartphones blackBerry white screen and light flashing when plugged into the charger

  phone was low load and I let it run out, but when I plugged in the charger all that I get is a blank screen and flashing light.  How he goes again please.

  Hi Pattisalt59

  Have you tried to remove and reinsert the battery while your device is connected to a charger? If not try and see if it blinks.

• Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.

  Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?

  Hello...

  Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support

• I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.

  I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

  Original title: BAD USB

  I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

  I am confused with this... I really hope someone can help me.

  Thank you for your time in doing

  Dido

  Hey Toni-LeeFurlotte,

  ·         Have you tried to connect to a different USB port?

  Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

  Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

  Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

  How to change drive letter assignments in Windows XP

• Internal computer speakers will not work unless the headset is plugged into the laptop - Windows 7 - TOSHIBA

  If the title pretty much sums up it.  Speakers of my laptop won't work if my headset (or other external speaker) is plugged into the jack Socket 3.5 mm on the front of the laptop.  This is a new feature for Windows 7.  Long story short... the helmet and work of laptop speakers when the two are connected, or work with the unplugged helmet.  Thanks for the help!

  Control Panel of Goto-> Sound-> reading tab. Right-click on the speakers and select default Setas.

  If it didn't he try to go to-> troubleshooting Control Panel and select troubleshoot audio playback. Follow the prompts.

  Hope that helps.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.