How can I mount a drive hard macbook on an imac?

Similar Questions

• How can I use my drive hard thunderbolt from 8 TB to backup all my wireless devices?

  How can I configure my drive hard thunderbolt from 8 TB to back up all my devices using a Wi - Fi connection?

  What you might hope better would be to use a Thunderbolt-to-Ethernet adapter to connect to the router, but even if it works, it would be like a fire (Thunderbolt) connection to a water hose (Ethernet) is launching... and expect to get more water on the hose... more, the best that can be done without wire will be about half the speed of the Ethernet network.

  Sorry, this is no sense... a Thunderbolt drive is designed to connect directly to a Thunderbolt port on a computer, or in a Garland with other devices Thunderbolt.

  In other words, as soon as you break the chain of connection Thunderbolt, the speed drops to Ethernet or even low speed wireless.

• How can I reformat my drive hard when I'm away from my windows vista disk?

  System backup and restore do not work. My windows update does not work.

  I have spyware and viruses that mess my computer. I have to reformat my hard drive and I can't find my windows freakin vista disk.

  So how do reformat you without disk of window vista, I need detailed instructions on how to do this.

  Without an OS disk, Vista or otherwise reformat will not improve your
  situation. You have options that...
   
  a. you can use the integrated recovery of your PC system (if it has one). Often
  It's accessible by repeatedly pressing F12 during restart (you may machine)
  be different). Do not forget to copy on critical files before you implement a
  recovery, or one of the following options...
  b. you can contact your PC manufacturer and ask a set of Vista restore disks to
  as your system to its original state. There may be charges for
  This service.
  c. you can buy a new set of installation of Windows 7.
   
   
   
  "Darkwave" wrote in message news: c1763cdf-c017-499 b-b173-ec9596d7ea81...
  > System backup and restore do not work. My windows update does not work.
  >
  > I have spyware and viruses that my computer get dirty. I need to reformat my
  > hard drive and I can't find my windows freakin vista disk.
  >
  > So how do reformat you without disk of window vista, I need a
  > instructions on how to do it.
  >
  >
  >
   
   

• How can I erase the drive hard so that I can sell my HP Pavillion/Windows XP/3 GB ram/512 MB hard drive?

  I need help wiping my hard drive, so I can sell my computer

  Hello

  You can use the process below to completely erase your hard drive, but you must have your game that recovery disks to reinstall the operating system if you want to sell it with XP installed.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://software.lsoft.net/KillDiskSuiteFree-Setup.exe of

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into yout laptop. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert your first HP recovery disc and restart the computer to start the installation.

  Kind regards

  DP - K

• How can I erase the drive hard when I can't read the screen of the monitor?

  I need to wipe the hard drive and reinstall windows xp but I can not "cmd" promp because I can't read the monitor

  What do you mean that you can not read the monitor? Is the black screen or it seems weird when you start the operating system? And why do you need command prompt to reinstall an operating system?

  You need not be inside an operating system to reinstall.

  1. Insert the installation disc and turn on your computer
  2 watch it down or up for orders of F access the BIOS (usually F2) or the Startup Manager (usually F12)
  3 power on the system again, then press the button once Startup Manager as a couple at the time wherever you turn on the computer.
  4. Select the CD/DVD drive as the boot device
  5. a screen will come in saying to press a key to boot from CD (so press a key) and the installation will begin.

  If you don't have a Boot Manager, then you must start in the BIOS or Setup and move the CD/DVD drive up to make the first boot device.

• How can I know which drive hard connection will fit in my XPS 400?

  Hello. I'm looking for more space and more speed from 400 XPS under Vista 32 bit.   Because I have a Pentium D 2800 core duo and 4 GB of ram, it seems to me that the last reasonable upgrade is a bigger drive.

  It currently has a WD 160 GB with 8 MB buffer.  My wife says that it's slow.

  In addition, the ones I see on Tiger direct shows SATA 300. Is it the same as normal Sata?    All are sata drives compatible with the specification xps 400?

  Option A): Western Digital Caviar SE16 640 GB hard drive - 7200 RPM, 16 MB, SATA-300, OE. $80.

   

  Option B):Hitachi sister 7 K 1000 1000 GB hard drive - 7200 RPM, 32 MB, Serial ATA-300, OEM.  $110 after rebate.
  

  1 TB disks seem to offer with 32 MB.  The 640 GB has only a case of 16 MB.   Assuming 640 GB is enough space, is it better to get the 16 MB buffer or is it useful to switch to a memory size 32 MB buffer? I get a pop in performance?

  Thank you!!

  Stu

  Message edited by sikerr on 03/10/2008 20:13
  Message edited by sikerr on 03/10/2008 20:13
  
  

• T61p how can I back up my hard drive

  <->Hello

  My laptop out of no where would not turn on and exposes the 1 long beep and 2 short beeps with a white screen. He is 5 years old and started to act a little, so I had to replace anyway, but my question is how can I save my drive hard if I can't turn on your computer?

  I read somewhere there is some type of adapter under $ 10 that plugs directly into the hard drive and then I can plug in my desktop computer... anyone know if this is true and this which is called the cord I need? Or how I could do to get my files on my hard drive?

  Thank you.

  Note of the moderator; subject published

  Will need you a 2.5 "USB to SATA external enclosure. You can buy some fees at most computer stores, for example the selection to computers Canada. 2 USB works perfectly although you can spend a little more for the newer and more fast USB 3 which will be on your new computer.

  Once you have moved the disc again case simply plug into a USB port as if it were a USB flash drive. The operating system will recognize it, install the necessary drivers and allow you to access the help of Windows Explorer or similar.

  (Note that this assumes that you does not have a hard drive on the old disk T61p password.)

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• How can I access my old hard drive?

  How can I access my old hard drive? I go to disk management to initialize it and indicates an error "the server cannot find the file specified" and the other says there is a problem with inputs and outputs. Any suggestions or help?

  If the player has not been recognized in the old PC he failed.

  Try this disc HD decision-makers audit utility to test, see what that brings

• How to replace a new drive hard satellite 1670cds

  How to replace a new drive hard satellite 1670cds
  do I have to remove the keyboard?
  wath is the GB limit

  Hi Theo,.

  HARD drive is mounted on your machine fest, and it is not easy to change. First you have to remove the keyboard, then view and top of page coverage too. If you want to do it yourself, be careful. If you do something wrong, it can be very expensive.

  It is not easy to say which is the limit of the HARD drive, but I'm sure you can use 10 GB with no problems. Try to contact the after-sales Service of Toshiba partner. Perhaps, they can give you specific information.

  Good bye

• Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

  Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

  Hi motionpicturedirector,

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• I have a valid product key for Vista Home Pemium. How can I get this drive?

  I have an Acer Aspire 5610 and my hard drive died.  I need to reinstall windows, but have no disk.  I have a valid product key for Vista Home Pemium.  How can I get this drive?  Acer sells not more the disc for this model.

  Hello

  Some manufacturers have more available Vista recovery disks.

  As Acer does not have them, you have to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I change the drive letter of the second disc of C: to another letter?

  original title: I add an opportunity second hard drive labeled C:. How can I change the drive letter of the second disc of C: to another letter?

  I'm runnibg Vista service pack 1 on a Compaq Presario with a labeled hard drive C:.

  No you haven't, how it was labeled in the old pc is irrelevant, just install you it as slave on your PC drive, depends on the question of if you need to change the jumper on the drive. Some PC manufacturers require the rider to be set as "cable select" others as "slave" (unless of course, it's a sata drive that requires no jumpers)

  Once it is set, when you start your PC, it will be assingned a drive letter

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General

• How can I wipe my drive and reload a new OS on my desktop

  How can I wipe my drive and reload a new OS on my desktop?

  Reboot with the command keys and R keys, use disk utility to erase the computer's internal drive and install a fresh OS.

  If you initially Lion among Apple's USB keys, you need to connect this drive, and then press Option after the reboot.

  (142468)