How can I restore my computer, my habit of exe files open

Similar Questions

• How can I restore my computer to a factory State, it's a dell optiplex gx1

  How can I restore my computer to a factory State, it's a dell optiplex gx1

  Hello

  You can check this link:
  Restoration of PC for Windows XP
  Note: It is very important that you back up all your personal data before you go forward because it would remove all of the suburbs

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I restore my computer to the way it was when I bought it

  I want to restore my computer to the way it was when I bought but don't know how someone can help me. It's a dell

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I did not support for Windows 7, but I don't have my product key. How can I restore my computer?

  Large screw upwards. No backup disks or restore points... Need help

  I messed up bad. try installing Acrobat Adobe Reader for PDF files. error... Could not load the dll base. Error 1606

  No system restore or recovery of points sooner then December 2011 files may have been deleted in disk cleanup

  I do not have the Windows 7 disc and no backups of windows, but I have the product key I found on my system

  already activated, how do I restore my office?

  Choose the downloadable. Following ISO file that matches what you have installed on your computer. Once you create a bootable DVD from the. ISO file you can use it to perform a repair installation.

  Windows 7 - ISO included with SP1 download
  http://techdows.com/2011/07/download-Windows-7-integrated-with-SP1-ISO-official-direct-download-links.html

  Windows 7 Edition Home Premium x 86 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24208.ISO

  Windows 7 Edition Home Premium x 64 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO

  Windows 7 Professional x 86 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24280.ISO

  Windows 7 Professional x 64 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24281.ISO

  Windows 7 Ultimate x 86 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24394.ISO

  Windows 7 Ultimate X 64 with SP1 (bootable)
  http://MSFT.digitalrivercontent.NET/win/X17-24395.ISO

  Complete list of Windows 7 direct download links:
  http://www.heidoc.NET/Joomla/technology-science/Microsoft/14-Windows-7-direct-download-links

  Dell users to read this:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ================ Repair Install ===================================

  Windows 7 - repair facility:
  http://www.SevenForums.com/tutorials/3413-repair-install.html
  "This will show how to do a repair of trouble Windows 7 installation and to preserve your user accounts, data, programs and drivers of the system."

  J W Stuart: http://www.pagestart.com

• How can I restore my computer to its factory settings?

  I have a Toshiba Satellite L30-105

  I * don't * all CD' of recovery.

  How do I * restoration * new portable computer to its * factory settings *?

  pls help...

  Order the new CD/DVD recovery (if possible) and you will have factory again.
  Try to order under the https://backupmedia.toshiba.eu/landing.aspx

• my cursor floating to and disrupt the layout, how can I restore my computer to its original state

  my cursor keeps floating offshore on its own and changed the fonts on my computer and do not know how to restore it to its original state

  Hello JeanSteel,

  I suggest try to perform a system restore to a time before having this problem.  If you want to restore your computer to factory settings, I would suggest contacting the manufacturer on the guidelines for this.  Also, be sure to back up your data before doing this.  Here is a link to perform a system restore.  Please let us know status.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thank you

• How can I restore my computer to original factory setting

  I try to restore my computer to original settings but you can't find any real help from the Dells site.  Any advice?

  Return to the Dell site and look for the manual of your computer model, which should briefly introduce the steps that you must follow.

• How can I restore my computer to factory settings?

  Original title: looking for professional help, big questions.

  Hello, I have a Dell Latitude d630 laptop, and it has some major problems, I can not understand.

  I am running windows xp service pack 2

  for one my mouse keeps moving left and right all by its self, not even try to figure this again

  I have a hidden player called drive X, it is also the boot drive, the only way I can access this hard drive is by selecting the

  also repair option when installing my software, this disk is write protected. Don't know, I installed a new hard drive and drive X

  rest, I installed new memory chips and still have the X drive, I don't know where else to look, where this information

  can be stored.

  I try Dariks boot and nuke, kill the drive, tried to format it, tried to remove all across BACK, once I turn the system

  stop and restart, all the information is back.

  also the files and folders have a tendacy auto recover, when deleting files and folders through BACK I get access denied much, have

  tried using Calc to support, but it don't work, suggestions for anyone who would be appreciated, I'm at the point where I am

  ready to pull my hair.

  Looking for programs or on back of syntax remove items from memory, I know that LH high load is used to put programs in upper memory

  blocks, but how do get out you? you are looking for a way to defeat the drive is write-protected, so that I can remove that darn pesty X drive.

  and anything else you might think you will help. tried sdfix download, but I can't, whenever I get to a link where I can download it

  Windows crashes. Help!

  Considering everything you wrote, your best option is to take the laptop to a reputable local computer professional, not a BigBoxStoreUSA or GeekSquad type of place.

• How can I restore my computer encrypted bitlocker to an external hard drive for bitlocker encrypted after main disk failure?

  I backup that my bitlocker encrypted computer running vista ultimate on an attached USB harddrive external also encrypted by bitlocker.  I have the password both on a USB stick and written down.

  You can restore to normal full image (well close to normal) just using the USB Flash drive and a hard disk formatted, white (with a system partition at least as large as the partition which it replaced)- and, of course, the backup drive.  I see no reason why a bitlocker recovery will be different - after all, it's just not added encryption process (although the exact procedure may vary because you may need to supply a password to authenticate the restore function and decrypt the files as they are restored - that's why it doesn't happen on the CD).  Of course, this means that you must have done a full image backup using bitlocker (not a full backup or a file backup).

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How can I restore my computer to factory settings so that I can give it with peace of mind about my personal information?

  I would only delete personal files.

  Hello

  Remove only the personal folders is not the way to do

  Everyone can recover with the software of data recovery and your user account name, parameters, etc rest...

  And if everyone would recommend "Dban"; who will even remove any recovery partition (which if necessary for purposes of relocation), because it deletes (as its default action) information on any hard disk that it finds in your computer and you need to reinstall the operating system.

  The way to do what you want to do is to reinstall the operating system that your header request initially (but remember the only way to know that your data is never recoverable is to physically destroy the hard drive!).

  Here are the various ways to reinstall the operating system:

  Contact your computer manufacturer and ask them to send a set of recovery disks to reinstall from.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer (this is why I did not recommend the use of Dban).

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• How can I restore my computer after installing VS2010

  I am running VISTA SP2.  I was running Visual Web Developer 2008 Express successfully for over a year when I started to have a problem of sqlserver, I couldn't fix.  Could not get help on the forum and MS of course does not provide support for a free product.  First of all, I wanted to try a new product on a trial basis, namely Visual Studio 2010.  My first trip was a disaster, but in fairness to MS, it's probably because I was installing a version appropriate for my VISTA Home Premium.  I chose the 'Professional' version, which has its own version and installed smoothly in comparison to the previous installation (with only a few items, do not install).  Bottom line after a few attempts to restore me to my home State, had to get a popup error saying effectively

  CompilerService.EXE service failed try to debug the process, the question I want to ignore or to debug.  No matter how I responded that he kept trying on even after I closed Visual Studio.  Tried to post on the forum with no response, and once again there is no Microsoft support because it is a trial.  I do not understand how I could ever buy a product I can not install even with success as a trial.  Anyway after that 10 days to install, uninstall, try this and try that, I decided to uninstall VS2010 before trying anything else.  I removed VS 2010 and what sounds like one of his tools, the descendants or siblings.  And here I always get an error popping at frequent intervals, saying: see below.  VS has been deleted, I find not just-in-time, and I'm tired.  If anyone out there can suggest something that might work?

  An unhandled exception ('System.InvalidOperationException') occurred in CompilerService.exe [7328] just-in-time debugging this exception failed with the following error: no installed debugger has Just-In-Time debugging active.  In visual Studio, Just-In-Time debugging can be activated from...

  I thought that this register may be the cause of this persistent popup errors, so I thought I would use a FIXIT MS has made available, but the FIXIT tool fails as I mentioned before.  If someone reads this, I can be informed that I'm posting this question on this forum, so please tell me where to post.

  Hi eps123,

  The question you have posted is related to Visual studio and would be better suited in the Visual Studio Forums.

  Please visit the link below to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• How can I restore my computer when I accidentally deleted the dates of restoration? and try to 'restore' B4 that did not work

  AND there's a window opens constantly present named recovery of Windows XP I can't close and even when I go to Windows Security (by pressing "Control Alt Delete") the Task Manager tab is not active (prevents the closure of this operation!). Windows XP Recovery window runs a 'scan', saying: I have several errors on my hard drive and wants to remedy by making me pay $69.95 for the service.  Sounds like a scam, or worse!  Do you think I have a few bad Adware? !! or what?

  In addition, my office is now empty and my documents have disappeared and my Start button says that I have not installed programs!  All this happened after being on Internet Explorer on a diet (HCG diet site).

  AND there's a window opens constantly present named recovery of Windows XP I can't close and even when I go to Windows Security (by pressing "Control Alt Delete") the Task Manager tab is not active (prevents the closure of this operation!). Windows XP Recovery window runs a 'scan', saying: I have several errors on my hard drive and wants to remedy by making me pay $69.95 for the service.  Sounds like a scam, or worse!  Do you think I have a few bad Adware? !! or what?

  In addition, my office is now empty and my documents have disappeared and my Start button says that I have not installed programs!  All this happened after being on Internet Explorer on a diet (HCG diet site).

  Your computer is infected with malware. Windows XP Recovery also is a rogue malware. He is also known to be bundled with TDSS Rootkit. Follow the instructions below carefully.

  1. Click HERE to download iexplorer.exe. Save the file to your desktop.
  2. Click Start > run > paste the following command > %userprofile%\desktop\iexplore.exe > Press Enter
  3. A dialogue window will appear similar to the command prompt. Leave the course ends. When the window disappears, the process is complete. You will be informed of any malware process which took end. Note: If you get a message that RKill is an infection, don't be concerned. This message is just a fake warning given by Windows XP Recovery when it terminates programs that can potentially remove.
  4. Click HERE to download Malwarebytes. During installation, make sure there is a check mark in the boxes) 1 launch Malwarebytes and 2) update Malwarebytes. Update and launch may take a few minutes so be patient. Once launched the scanner performs a quick search. If you need help to use Malwarebytes click HERE. Once the analysis is completed, follow the prompts to remove the detected items.
  5. Click HERE to download TDSS Killer. It of a short sweep and will detect and remove TDSS Rootkit if it is present on the computer. Just follow the guests.
  6. After TDSS Killer finished click HERE to download Unhide.exe. Save the file to your desktop. Double-click on the file and choose run if you are prompted. Leave the course ends. Note that the process can take a long time. Once the process is complete your files is no longer must be hidden.

  NOTE: It is sometimes necessary to perform steps 5 and 6 in reverse. Also, if TDSS Killer or Unhide.exe are not visible on your desktop after downloading, click Start > run > type tdsskiller.exe or unhide.exe > Ok to automatically launch the software respectively.

• How can I restore my computer back to factory settings?

  Some of my factory programs stop working. I saved all the information I need. I have a Dell Inspiron 1525 with windows vista. I want to reformat and deliver to all factory settings. Help, please. Thank you. Michael

  Hello

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is way Dell to reinstall Vista from their provided? DVD recovery on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.