NEED HELP! Cannot burn CDs...

Similar Questions

• cannot burn CDs or install a mild wear to help me burn cd

  I can't read soft wear in my cd player. I can't install knew

  programs into my cd player. I tried to install a program which

  help me burn discs.

  Hi pops1,

  1. When did you start to question?

  2. you receive error messages or codes?

  You can see the Microsoft KB article and try the Fixit or suggested methods to solve the problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Also check out the link:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L30-113 - cannot burn CDs or DVDs

  I have a Satellite L30-113. Recently my driver failed for my dvd player, until I was able to install a few things and burn CDs and DVDs. Now, I can't record CDs or DVDs.

  Nero and CDBurnerXP for CD/DVD ROM say 'cannot continue burning process as you did not choose the device for recording. CD/DVD ROM propities shows that it does not support recording CDs and DVDs.

  I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again. I am a driver update search and xp tells me that the driver is up-to-date. I checked the Toshiba updates with none of these updates for CD/DVD ROM.
  I have no idea on how to fix this unit "corrupted".

  Hi mate,

  I had a similar problem on my Toshiba laptop. So here, I searched a little bin forum and I founded to delete upper and lower filters in the registry. I followed the instructions in this Microsoft article:
  http://support.Microsoft.com/kb/314060

  After that, I again was able to burn DVDs.

  In addition, updated driver from CD/DVD isn't necessary because this driver is part of the operating system.

• Satellite A210-16F cannot burn CDs or DVDs...

  Hi, I bought a Satellite A210-16f. I did the downgrade to XP Professional... Everything works fine, but I burn cds, dvdcs, audiocds can´t...
  I don't know if its problem of HW or SW problem... In Vista home I didn't try to burn a CD, because I reinstalled it XP.

  I use Nero 8, but after 3% of burn it show me error and Burning process failed
  Nero 7 shows me the same.

  I tried Toshiba disc creator and this SW shows me this:

  The ocured of following error to save data
  Stops the current process
  Error occurred during the registration phase...

  etc...

  Can U help me?

  Thanx

  Well, either it's a question madia or CD/DVD drive problem.
  Check another CD and DVD from different manufacturers.
  If the same thing happens to what different types of media, then it s a STRANGE HW issue.

• Satellite A200 cannot burn CDs

  I have an A200 - 1 GB and I can not burn CDs and DVDs only. I tried different programs, but it was the same thing.
  What can be the problem? I want to update my driver, but I don't know which driver is from the download page. So, please help.
  Thank you.

  Have you used the CD s mentioned in the user manual?
  As far as I know Toshiba recommends to use the CD manufacturers listed in the user manual

  However, the problem of material is possible in this case that replace the CD/DVD drive

  Good luck

• cannot burn CDs when I drag my music to burn list, wich Player do I use

  I write and play my own music and can not burn my playlist when I drag from the air to burn the list, can I use e-reader? I've tried both

  Hello

  1. what burning software do you use?

  2. do you get an error message?

  If you do not use Windows media player, and then follow the steps in this link to burn CD and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  If you are not able to burn CDs of any burning software, then try to run this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  It will be useful.

• Cannot burn CDs or watch DVDs

  Am not able to burn CDs. The media player to rip music, but am not able to burn CDs.  Also unable to watch DVDs

  Hello rcaddy40,

  1. don't you make changes to the computer before it stopped working?

  2. don't you get an error when you try to play DVDs on your computer?

  I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

• Need help, cannot connect to http sites, https only...

  BLUF: I can connect only to HTTPS Web sites, http gives me 'unable to connect to the server' or "no route to host" errors.

  While I was out of town, the woman finished downloading something on his MBP that cause a lot of pop-up ads any time during the use of the internet.  I ran Malwarebytes Anti-Malware and it found and removed a bunch of infected files.  All this while the computer was on OS X 10.9.x. Since that time, on any browser (firefox, safari, chrome) we can only connect to the https pages.  For example, http://www.google.com = no go "impossible to connect to the server...". ", while https://www.googlec.com = good, but unfortunately most of the links is http, so it is useless.

  I spent most of the last days 2 pouring on the forums, and troubleshooting to resolve this question... what I did:

  Reset my router (without success, all the remains connected to it is good (everything else is also Android/windows))

  Reset my modem (even had my ISP reset everything they could on their end too)

  Back to zero/reinstalled all browsers,

  erased the PRAM using the option + command + p + r at startup.

  verified that no Proxy box is checked in the advanced network settings

  tried to change the DNS, manual, auto, opendns, 8.8.8.8/8.8.4.4, using my ISP DNS googles, nothing changes.

  uninstalled all that was installed last week (not a lot, but now I don't know what it was).

  disabled the browser all extensions/plug-ins.

  IPv6 disabled/re-enabled (set to auto),

  What works:

  Safe mode, internet is full to the top.

  While in safe mode, I was able to connect to the app store (could not in a regular connection or guest user) and upgrade to OS X 10.11.5, but even the installation that does not solve all missing / corrupted files, I always have the same question.

  I thought for sure the new OS would have fixed it, but now I'm really stumped.

  Is there a way to reset completely all network settings? Could get blocked port 80 (http)? How can I tell?

  Any help would be appreciated,

  v/r

  Sean

  (a husband who knows enough about computers to really break, ha)

  First, never use any type of software "anti-virus" or "anti-malware" on a Mac. That's how cause you problems, not how you solve them.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Cannot burn CDs on Satellite Pro L10

  I have a Satellite Pro L10 and impossible to copy data files to DVD/CD player. I go through the process by using the Editorial Assistant and it appears to download the files, but finishes with a screen that says "cannot complete the CD Writing Wizard" and ejects the CD. The CD is empty, but the displayed size went from 720 mB to 647 mB of free space and total size.

  This was not always the case, because it worked when I first got the L10. The L10 has Windows XP

  Any ideas please?

  Hello

  Are you trying to burn the files using clean combustion of Windows?

  Hmmm I put t like this feature of Microsoft. I use a 3rd party software to burn data and files on CD or DVD.
  It s Nero burning ROM.
  This tool is really nice and I have not noticed problems using this software.
  You should also test this tool and I'm sure that you will be very satisfied.

  But back to the error message that appeared during the burning process;
  After a lengthy investigation on Microsoft pages, I found very useful knowledge base article Microsoft and information;
  http://support.Microsoft.com/kb/324129

  The error messageError: cannot complete the wizard of CD writing ofmay occur if the IMAPI CD Burner service is shut down. To resolve this problem, make sure that the service is running and that it has not been arrested. By default, the service is set to manual. Start the IMAPI CD Burner service and then test it by writing on a CD - R or a CD - RW. If the service is running, you may need to set the service to automatic if it does not start in manual mode.

  To set the service to automatic, follow these steps:
  1. click on start, run, type services.msc /s in the Open box, and then click OK.
  2. double-click on IMAPI CD - Burning COM Service.
  3. under the service status, click Start.
  4. try to write data to a CD.

  Good luck

• Satellite M70-173 - cannot burn CDs or DVDs

  Hello

  I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
  I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
  I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

  It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

  I have the following options:

  1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

  2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

  I made copies pdf of burning errors I can post if necessary.

  Any help is welcome

  Kind regards
  Juan

  Hello!

  > I made copies pdf errors burning I can post if necessary.
  Yes, I think it's a good idea. ;)
  Otherwise it of a bit difficult to help you.

  But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
  And you should burn on a lower speed for CD e. g. 16 x.

  Good bye

• Cannot burn CDs or DVDs, get code error 380381-26-00037200

  Original title: DVD problem

  I can't burn a cd or a dvd, error code 380381-26-00037200 appears. CD DVD & cannot be formatted

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Cannot burn CDs with hp memories disc creator error "drive no.

  Original title: lots of help!

  hope there, can someone help me with this one. I have creator of disc memories hp that allows me to create slideshows. Everything works fine until I have access to the secect setting and it says drive no.  Which means that I can't burn a cd. Can someone tell me how to find a cd burner that will wrk with my memories disc creator. MY home system is Vists Home premium version 6.0

  Hi LARRYHEUETT,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the application.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2: Follow the steps in the article.

  Solving problems with HP memories disc creator software

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  For reference:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00041459&LC=en&DLC=&cc=us&product=78076

• cannot burn CDs, insert the blank disc rpet

  I continue to insert a blank disc, but it will not burn

  Hello

  I suggest that you follow the steps in these links and check if the problem persists.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - click on Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• help cannot burn the file with audio ac-3 to dvd

  HELP A WHILE SO FAR

  Hello

  Thank you for the update from us.

  We are sorry for the inconvenience. I'll probably help you with that.

  Please provide us with more information to better understand the issue.

  1. Codec packs installed and when that you installed?
  2. Has the codec packs that is supported ac3 format?
  3. What other DVD burning software have you tried?

  For the moment, please try the steps below and check them off, it helps to solve the problem

  Step 1.

  I suggest that you try to play AVI files in Windows Media Player, check if he plays well. If so, I recommend that you try to burn from in using Windows Media Player and check if it works.

  For more information, please see the link on burn a CD or DVD in Windows Media Playerbelow.

  burn-cd-dvd-media-player#1TC=windows-7 http://Windows.Microsoft.com/en-us/Windows/

  If the steps above does not resolve the issue please try the steps below.

  Step 2.

  I would recommend you provide through the suggestion of rhylcolinjones of the sub thread link which looks like the similar question, you are faced with.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-DVD-Maker-no-sound/544a3ce8-2617-4FA0-9f5e-4566f334bd5f

  Hope this information can help, please post us with the State, we will be happy to help you.

  Thank you.