How can I run the procedure without parameters.

Similar Questions

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  I don't have access to the standard account is a password on the administrative account and don't remember and I don't want to remove the account because I have important documents, how can I access the account without the password

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• Hi, I have a photo that was taken in a park; unfortunly the man's face is very dark.  How can I lighten the face without lighten the plants and trees?

  Hi, I have a photo that was taken in a park; unfortunly the man's face is very dark. How can I lighten the face without lighten the plants and the trees that surround this person?

  Thank you

  Ryan

  Have a look here:

  How to lighten a face dark

• InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  InDesign cs6 still not compatible with the iMac 5K, his frustration that adobe is not fixing this issue! Perhaps a strategy to move to Adobe CC? I have urgent need to know how can I run the application correctly.

  It will never be updated for InDesign CS6. This has been discussed to death. Adobe updated the CS6 applications that she could update. Illustrator and Photoshop come to mind, so your conspiracy theory is incorrect.

  InDesign should be re-written from scratch due to the difference in the way it was designed.

  Your choice is to live with it or move to creative cloud.

• How can I reinstall the CC without having to start a new account after a hard drive change?

  How can I reinstall the CC without having to start a new account after a hard drive change?

  Just got my PC back from repair with a new drive installed and al, I see for the CC options for new accounts to create, I already have one so I want to reinstall my account without having to pay for a new account.  Can someone tell me how to do it please?

  Hello

  Please visit the given link to download CC: download and install Adobe Creative Cloud applications

  * Connect with your Adobe on which you have registered the product ID.

  Concerning

  Bianka Attre

• How can I change the password without original password? received from a friend's computer and they don't remember password and I can't upgrade adobe, java etc...

  How can I change the administrator password without having the original password? received from a friend's computer and they don't remember the password. Unable to upgrade adobe flash player or anything without password.

  Hello

  If this is not applicable, you must reinstall the operating system.

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How can I run the remote registry service in Windows Server 2003?

  original title: How do I run the remotley remote registry service? I'm unable to open a session

  I'm on windows 2003 R2 server, when I connect automatically to this topic still disconnects once, I'm remotley to change the registry, but the remote registry service does not work, how to run from a computer on the network, because I can not connect?

  Why you ask a question of Server Windows in a Windows XP forum?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I have an iPad 2 Air, version 9.2. Whenever I have delete an app that has problems and then try to reinstall it, it simply returns to the iCloud as I sent it, with the remaining problems. How can I reinstall the app without problems?

  I have an iPad 2 Air, IOS 9.2.  I deleted (uninstalled) an application that follows my use telephone and internet for me, because it stopped working.  Whenever I deleted an application he's apparently going to iCloud, and put it back, it simply sends down, warts and all, as happens with this one. How can I get the application in a "clean" State, under its previous problems?

  Deleting an application does not send it to iCloud, and it deletes your system actually.  The problem is that the defect in the application has not yet been set by the developer, and your relocation simply recovering the defective version of the app on your iPad.  Expect that the developer of the app has a new version until you try to reinstall.

• How can I start the database without using crsctl? ~ Xev

  Hey guys, it's Xev.

  I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.

  How to use srvctl to put the database in a mode of editing?

  I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?

  Thank you

  Xev.

  Xev Bellringer wrote:

  Ho Toby, when I try this command, srvctl start db d db_unique_name o mount

  It gives me the following two errors:

  PRCD-1027 unable to recover the RAC database

  RPRC-1070 has been unable to verify

  I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.

  I have crs stack while I do this? If yes how do I start the CRS battery without the database?

  Hi Xev

  On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.

  Remember: -.

  1 take a full backup still running (assume that you already have).

  2. make cluster_database = false, before starting the recovery.

  3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.

  4 restore the db.

  5. you start db.

  6. set cluster_database = true.

  7. stop your db in normal mode, immediate.

  8. start your database by srvctl

  Good luck...

  Concerning

  Jihane Narain Sylca

• How can I run the License Manager?

  Hi - I had LV 8.5 installed for a while now and I just built an exe file, so I need to activate the application builder. I have a license key but I do not see how to run the License Manager.

  According to the instructions in the box, it should be at the start > programs > National Instruments > NI License Manager

  But he's not here. Does Nayone know where on C: I can actually find the exe I need to run?

  It is a Windows XP machine.

  Thank you

  Jon.

  Here, "C:\Programme\National Instruments\shared\License Manager\Bin\nilmUtil.exe" it is on a German system.

• How can I update the BIOS without using a CD?

  Hello!

  I recently decided to update my RAM from 2 GB to 4 GB. After installation, I started my computer to find that it would not recognize the new memory. After doing some troubleshooting, I decided to try to update the BIOS, like the 2010 version. I have downloaded the update to the BIOS boot CD implementation of lenovo, burned a disk and restarts, I found that the boot order has no CD contained thereon. Here's the catch: I do not have the supervisor password. It is a mobile phone in hand, and I tried to find the password nothing is done. It's the current boot order: USB key, hard drive.

  My question is, can I create a BIOS update disk using a USB key, or update the BIOS of another way?

  I understand that it is impossible to recover the supervisor password without having served (that I prefer to not do, even if I have to return my Crucial RAM)

  My system features:

  ThinkPad L512

  BIOS version: 1.04

  BIOS date: 2010-3-26

  Controller of Embeded Version: 1.01

  Windows 7 32 bit

  Thanks for your help.

  Welcome to the forum!

  Two things here:

  (a) If you run the system update, it should offer the latest BIOS for your machine as well. I never did on a protected device, so it may or may not work, but perhaps worth it.

  (b) I doubt the ability of the system to recognize the new RAM has something to do with the BIOS. Much older than your ThinkPads will take place 4-8 GB of RAM with an old BIOS, older than your machine initially.

  Good luck.

• How can I update the view without freezing?

  Hi all

  I am trying to load more items in a list, as does the Twitter app

  

  When I want to load more items, I have done the following:

  • I shows Loader
  • I do the networking activity
  • I'm updating the view

  The problem is that the application UI freezes during the stage of "update view" (for 2 or 3 seconds).

  Because I'm not in the main thead element I update the gwendoline in the following way:

  UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
                  synchronized (UiApplication.getEventLock()) {
                      while (MyList.hasMoreElements()) {
                           ...
                            ScrollableList.add(item);
                            ...
                      }
                       hideLoader();
                  }
              }
          });
  

  Is it possible to update the view without fix it the interface?

  Thanks to you all.

  Welcome to the support forum.

  invokelater enough, you don't have to synchronize the lock of the event.

  I don't know what is ScrollableList, but if you want to use a ListField, for example, you can add all the entries at a time.
  Even in other cases, as a normal Manager, addAll could be much better performance.

• I bought a win 7 pro online. Now I have the product key and a computer with win 7 Home premium. How can I upgrade the system without reinstall it?

  It seems that I can't use any upgrade of the time, because the key to upgrade is something different with the product key. I don't want to reinstall the whole system.

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade