How can I simulate RAM in Multisim?

Similar Questions

• How can I simulate the NI 9265 virtually

  Hello

  How can I simulate or see the output of my generation of current 0-20 currnet my VI virtually. i.e. as explore or express signal.

  Thank you

  Prashant

  There is no way to update outputs in LabVIEW code and monitor these changes in the Automation Explorer.  It's no different than using real hardware.  The main goal to add the virtual hardware is so you can test your code without errors.  If you need monitor values that you export, there are tools for debugging embedded LabVIEW - the faster would be to simply add a probe where you write a value to the device.  If the writing DAQmx VI does not report errors, you can assume that the actual hardware correctly displays the value you requested.

  As for the screen that you see in Explorer automation, it is normal for USB devices.  All the buttons at the top of the screen can still be used (Self-Test, Test panels, Reset Device, etc.) and you can always get to the other pages of this device with the different tabs at the bottom of the page.  Since it's just a simulated output device, you probably won't find much useful in Automation Explorer.  The real advantage of a simulated device is just for running and debugging code in LabVIEW.

• How can I add RAM?

  I have Windows Vista Home Premium, but it is slow. I have a dual CPU AMD Athlon 64 x 2 4400 + 2.30 GHz, which tells me is powerful, but I don't have a lot of RAM - 1918 MB only. I have two slots of RAM left inside my computer. Where can I buy RAM cheap and what type do I? Should what features I look for? Should I pay attention to tracks or SATA or GHz stuff or what? I don't know how to make sure it is compatible.

  Hello

  the best way is to use a sweep "crucial" to verify that your motherboard is for ram and advise what compatible size and speed to buy

  site link Web and crucial scan

  http://www.crucial.com/

• How can I simulate 50% load on a point to point WAN circuit to measure the latency of a pre-determined SLA?

  I just built a remote DMVPN RADIUS with an 300Mbps private point-to-point circuit to the data center.  My manager has promised an SLA of< 20ms="" at="" 50%="" bandwidth="" utilization="" (i="" think="" he="" made="" that="" up?!).=""  i'm="" trying="" to="" sort="" out="" the="" best="" way="" to="" test/document/baseline="" this="" statement="" for="" the="" customer.=""  my="" questions="">

  Can how best I simulate a 50% load on the circuit? -My thoughts would be to set up some sort of maximum bandwidth QoS between 2 hosts and push then a large amount of traffic across the link and then average latency statistics ICMP to ping between the same two hosts.

  Without going into too much detail, the remote site is using ASR1001 (DMVPN spoke) with tunnel interfaces ASR1002 worms (DMVPN hub).  3750 x at the access layer.

  3750 x > mm fiber > asr1001 (speak) > 300Mbps circuit > 3750 x > asr1002 (hub) > l ' infrastructure.

  Thanks in advance!

  On the client side of Iperf use the-b option to specify the available bandwidth. [UDP]

  I hope this helps.

  See here:

  http://OpenManiak.com/Iperf.php

  UDP tests: (-u), bandwidth settings (-b)
  Also see the section "Jperf.

  UDP tests with the argument u will give valuable information on the jitter and packet loss. If you do not specify the argument - u, Iperf uses the TCP protocol.
  To keep a good quality link, the packet loss should not go more than 1%. A high packet loss rates will generate a lot of retransmissions of TCP segment that will have an impact on bandwidth.

  The Jig is basically the variation in latency and doesn't depend on the latency. You can have high response times and a very low jitter. The jitter value is especially important on network links supporting voice over IP (VoIP) as a high jitter can interrupt a call.
  The argument-b allows the allocation if the desired bandwidth.

  Client side:

  10.1.1.1-c #iperf u b 10 m

  ------------------------------------------------------------
  Client that connects to 10.1.1.1, port UDP 5001
  Send datagrams 1470 bytes
  The UDP buffer size: 108 KB (default value)
  ------------------------------------------------------------
  [3] 10.6.2.5 local port 32781 connected with 10.1.1.1 port 5001
  [3] 0, 0 - dry 10.0 11.8 MB 9.89 Mbps
  [3] send datagrams 8409
  [3] the server report:
  [3] 0, 0 - dry 10.0 11.8 MB 9.86 Mbps 2,617 ms 9 / 8409 (0.11%)

  Server-side:

  #iperf s u-i 1

  ------------------------------------------------------------
  Server that is listening on port UDP 5001
  Receipt of datagrams 1470 bytes
  The UDP buffer size: 8.00 KByte (default)
  ------------------------------------------------------------
  [904] 10.1.1.1 local port 5001 connected with 10.6.2.5 port 32781
  [ID] interval transfer band jitter bandwidth Total lost datagrams
  [904] 0,0-1,0 s 1.17 Mbps ms 1,830 9.84 MB 0 / 837 (0%)
  [904] 1.0-2.0 sec 1.18 MB 9.94 Mbps 1,846 ms 5 / 850 (0.59%)
  [904] 2.0-3.0 s 1.19 MB 9.98 Mbps 1,802 ms 2 / 851 (0.24%)
  [904] 3.0-4.0 sec 1.19 MB 10.0 Mbit/s ms 1,830 0 / 850 (0%)
  [904] 4.0-5.0 sec 1.19 MB 9.98 Mbps 1,846 ms 1 / 850 (0.12%)
  [904] 5.0-6.0 sec 1.19 MB 10.0 Mbps 1,806 ms 0 / 851 (0%)
  [904] 6,0-7,0 sec 1.06 MB 8.87 Mbps 1,803 ms 1 / 755 (0.13%)
  [904] 7.0-8.0 sec 1.19 MB 10.0 Mbit/s ms 1,831 0 / 850 (0%)
  [904] 8.0-9.0 sec 1.19 MB 10.0 Mbps 1.841 ms 0 / 850 (0%)
  [904] 9, 0-10, 0 sec 1.19 MB 10.0 ms 1,801 Mbits/sec 0 / 851 (0%)
  [904] 0, 0 - dry 10.0 11.8 MB 9.86 Mbps 2,618 ms 9 / 8409 (0.11%)

• With pellets W510, how can we simulate a right-click of the mouse to 'copy' the text?

  Were you successful in highlighting a text in the Tablet, but having to use the application 'menu' to 'copy' the text, and then "Paste"? I found it is not easy with a Tablet and messy. Were you able to highlight text, and then simulate a right mouse button pressure and don't use DO NOT the menu function to 'copy' and 'paste' your text desired? If you did that, then I would like to hear from you! Kindly tell me how you did it. In case I don't come here very soon, U could please send a copy of your response to: [under the direction of privacy] Thank you!

  Of course, it's easy! Just hold the touch for a few seconds until you see a finger of yor box surround. When you release the button, it will give you the context menu.

• How can I return RAM Preview?

  I'll avoid a mug shot and distill my frustration down to say this: I really hate that RAM Preview was withdrawn after effects CC. He has completely roadblocked my workflow.

  That said, is it possible possible to recover what has been taken? Hit the SPACEBAR to play the scenario does not work... because it is not guaranteed to play in real time, it will not correctly cache the video and audio together, while audio is generally cancels after a few seconds, it is impossible to see how the video and audio work together.

  I get bored really power get a reliable overview and control where on the timeline and how long this preview was.

  A value of 0 (zero) key on your num pad should do a RAM Preview.

• How can I simulate a wink on a still image?

  I still have this image:

  

  I would like to create a clip, where the Hare winks with his eye, he closed a moment and then opens again his eyes. Are there examples, tutorials or suggestions how to address the issue?

  Ooops... Dang forum jump... Since we are already in the AE forum we'll see... You can create using fluidity or remodel. in the latter case draw you a couple of masks and quite literally to gather the eyelids. However, you may have extra work in Photoshop or elsewhere to prepare some fixes you can layer and animate their opacity. Extreme distortions tend to look crazy in other...

  Mylenium

• How can I play ram files in firefox 33

  I'm unable to play ram files. The realplayer add-on no longer exists? What is available to play ram files?

  Fixed problems with RealPlayer modules

  See also http://forums.mozillazine.org/viewtopic.php?f=38 & t = 258759

• How can I "simulate" a style sheet applied to a web page?

  I used to know, but do not need to do this in a while. Could someone remind me how to tell dreamweaver to apply a style sheet to a Web page in Dreamweaver without actually linking to it? Especially useful when designing PHP includes are no < head > tags, but will be later associated with files that do. Until they are combined, they are isolated from the folder root that links to the CSS of the file and look like shit.

  I know there is a way to tell dreamweaver "just show my what the page would look like if the style sheet was applied to this" without actually adding the link to the code, but I forgot what it's called, Googling it turned to nothing else than false positives.

  Thank you!

  Design-TIME Style sheets

  Nancy O.
  

• How can I make my hd images look like the old formats?

  I am currently working on a project where I want back to the transition from the looks of the old formats like DV and VHS early cassettes. I'm really interested in the differences between the formats aesthetically, but in other words, I don't know what the differences are. I found how to simulate interlacing and contrast of the limitations of the old formats. He always looks very digital for me however. How can I simulate that look hot and faded from first consumer cameras?

  Add a bit of blur and effects as Timewarp allows you to add a little "smear sensor. Also consider separating the channels and compensation slightly at the subpixel level to mimic the lack of alignment of sensor cells. And then of course the usual - noise, a little wiggle position to simulate the irregular Strip transport, possibly roll bars and other artifacts video typical as well as some very heavy color corrections. For example an old DV film has almost no own blues due to subsampling of the chrominance and everything is transformed in purples, dark blue petrol and turquoise. Same thing for the Greens and the reds with yellow casts...

  Mylenium

• How can I know what ram slot ram in there on my G4 imac

  OK so I have an imac G4 1 GHz version and I don't have any tools to open it to see what ram slots are empty for a ram upgrade how can I know what ram slot is free and opening the mac

  There is a user accessible memory slot. You can install a maximum of 2GBs. The memory of the plant is pre-installed.

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• How can I fix low ram memory?

  OS X El Capitan

  10.11.3 version

  MacBook Air (13 inch, early 2015)

  Processor: Intel Core i5 to 1.6 GHz

  Memory: 4 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 6000 1536 MB

  Storage: 49,68 free GB of 120,11 GB

  My computer is incredibly slow most of the time. Is not an expert in this field, I google and discovered CleanMyMac 3 and downloaded because it had a good rating on CNET. While it has deleted unnecessary files, I can't say that he did a lot with the memory and the slowness of my computer. I have lots of storage. I do not use anything like Photoshop. Usually the most I do is listen to Spotify or Amazon Music (he said would not be a problem one Apple when I bought it). When my computer is running slow, I leave Spotify (not just close the window) or Amazon nearby. Often I need to open Microsoft Word with Safari while working on a ballot in permanent Contact. I tend to keep multiple tabs open in safari so I shut them down when I noticed. Often quit all applications non-Safari, including Spotify and closing all but one or two tabs in Safari still do not help. I understand that Apple solders the 4 GB to the motherboard (or whatever that it's called... I'm no expert), making it impossible to upgrade memory. What choices do I have? Help, please!

  Since you can't upgrade RAM, you should minimize the use of all that is not essential so that you do not have too many concurrent processes. This is what causes the computer to get finally subdued. In addition, get rid of my own Mac. You don't need, and it's a waste of money and memory. Don't forget to use the uninstaller if she a. Removing the application removes all other files that it installs.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Qosmio F30 - How can I increase the RAM

  IM from the philippines and I've had this laptop PQF30-00X016AR...
  Where could I find a Toshiba Center appropriate for that.

  This is because the laptop Qosmio series and I want to expand the memory.
  So bad, but this kind of cell is not yet released in our market.

  How or where I could spend it?

  Hi mate

  The Qosmio F30 memory can be upgraded up to 4 GB of RAM.
  In this case you would need 2 x 2 GB DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM.
  Usually it s no matter what manufacturer of RAM is all the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules must be compatible
  But I prefer the Kingston modules I use a more long time and had good experience with it.

  The RAM slots are placed at the bottom of the unit. There is a component of slot secured with a screw. You will need to remove this screw in order to get access to the memory locations.

  PS: the detailed instruction how to upgrade the RAM modules can be found in the user manual. You can find the download page manual here:
  http://EU.computers.Toshiba-Europe.com-> support & download

• Satellite Pro 4600: 2nd RAM slot inactive - how can I activate it?

  Hello!
  A few days ago, I bought a Pro 4600 opportunity with 2 x 128 MB of RAM. Two of them are working - but not together! Only the slot A working and accepting both Rams when I insert them. The user who I bought the laptop told me that they worked before it was erased from the system.

  How can I activate it?

  Thank you very much in advance,

  Flo.

  Hello

  It s not necessary to enable the second memory slot.
  After you have installed the memory module slot should accept the module and it must be shown in the BIOS.
  The two modules of work in the first place. In this case, both are ok and not in default. It is also possible to upgrade memory 256 MB.
  Well, in my opinion, the second slot memory is dead.
  Unfortunately, there is nothing to see :(