How do films play using the Xbox360 HD on PC WINDOWS VISTA drive
I wanted to use my Xbox360 HD Player on my pc, what program/software I need to play IE HD movies: PowerDVD, Windows Media Player?
Hi ScottyK,
Thanks for the reply.
Check the video settings in Windows Media Center and try to play the movie.
Step 1: Open Media Center and check the video settings.
Step 2: Connect the HD DVD player to the USB port of your computer. This port is usually located on the side or the front of your computer. A corresponding USB port will be located at the rear of the DVD player. Both ends of the cable are the same and can be plugged into a USB port. Connect the USB cable to the back of the DVD player.
Step 3: Insert the DVD into the DVD drive.
Step 4: Try to play the movie using Media Center and check for functionality.
Thank you, and in what concerns:
Syed V - Microsoft technical support.
Tags: Windows
Similar Questions
-
I'M ON A WIRELESS SYSTEM TO RUN FAST, NOW I'M I'VE SEEN TROUBLE STREAMING MOVIES AND EVEN VIDEOS ON YOU TUBE, CAN SOMEONE ME USING THE ADVICE ON SETTINGS OF WINDOWS VISTA?
Hi GrahamCroal
1. is the streaming of films and videos slow down or you are totally unable to broadcast their?
2. what exactly happens when you try streaming?You can check if the below link help-
Also the connection speed must be higher than the data rate of the content you read to discover Fast Streaming. The faster your connection, the better your experience will be. So it depends entirely on the broadband connection you are using and speed offered by the connection. If you want faster streaming then you need check the high-speed broadband connections. You can communicate with the internet service provider for more information about the same thing.
I hope this helps.
-
Error: tell someone else used the same IP address on Windows Vista
Original title: same address
I got a message this morning saying someone was using the same service provider address Internet as I am... i said to contact windows
Hi Brenda,
(1) what is you receive the exact error message?
(2) when exactly you receive this error message?
(3) remember you to make changes prior to this problem?
Run the fixit available in the article below to reset the IP (Internet Protocol) address
How to reset the Protocol Internet (TCP/IP)
-
When I turn on my pc it loads windows vista but somehow my name and my password do not work now. I can go in safe mode, but it won't let me change the name or password. I wonder if I can just get on with windows 7 or 8 without being able to access my current windows vista?
Hi Sean,.
Please follow the methods.
Method 1:
Follow the instructions from the link
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
Method 2:
Follow the instructions from the link
Boot from the Windows 7 DVD to perform a custom with formatting the hard drive installation.
Installation and reinstallation of Windows 7
http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7
NOTE: before starting the installation. should be ready for the worst case scenario that leads to your existing data on your current computer to delete. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you start the installation.
Reference links:
System requirements Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/system-requirements
How to upgrade to Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/install#1TC=T1
-
Use the product key OEM with Windows Vista fresh install
Hello. I got my Acer Aspire 5517 laptop for my birthday a few years ago (with Vista pre-installed). A genuine OEM product key is located at the bottom of the laptop. How can I use it with a new installation? Or can I somehow get an ISO or CD OEM Microsoft's file, or download it online somehow? Please don't tell me to upgrade to Windows 7, as I don't have hundreds of dollars to spend right now. Thank you!
-RyanHe's here...
-
How to use the utility disk first aid for hard drive internal el captian
How to use the utility disk first aid for hard drive internal el captian
Select the drive and click first aid.
If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.
-
How can I print using the cover
How can I print using the cover
using the cover? How is that? To be more specific, which is a software or hardware?
-
How to activate and use the built-in webcam
built in webcam
How to activate and use the built in webcam on my desktop Dell Inspiron 1?
MikeViklund,
Try to read...
Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software
Rick
-
How do I stop using the product key in my PC, so I can use it in my laptop?
A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?
PS. : Sorry about my English, I m still learning!
A long time ago I had installed Windows Vista (original) on my PC at home. But now I m leaving in another city and I m just using my laptop. I received a message through the Windows Activation (¨The product key you typed is already use¨) and two options: buy a new online or type a different product key. I Don t want to buy anything and I Don t have a different product key. So, how can I stop using the product key in my PC (which i Don t use it!), so I can type in my laptop? Maybe uninstall Windows in my PC could solve the problem, but I Don t want to travel back home 7 hours for this! What can I do now?
PS. : Sorry about my English, I m still learning!
Your English is very good.
You simply need to activate Windows in the laptop by phone call at a command prompt, type slui 4.
You * must * also to remove Windows from your desktop computer, but if it is to wait a few moments, it shouldn't be a problem.
-
How low-level format using the code debugging?
original title: how to low-level format using the debug code? can someone give a code
How low-level format using the code debugging? can someone give a code
Hi microcontrol.
· What is the number and the model of the hard disk that you use?
Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.
The Microsoft article below may help if you use a disk Western Digital or Seagate.
Using DEBUG to start formatting
http://support.Microsoft.com/kb/60089
I hope this helps!
Halima S - Microsoft technical support.
-
The images appear tense when played using the slide show in full screen
The images appear tense when played using the slide show in full screen in Windows Vista Basic. That means that a picture of resolution 1920 x 1200 appears full screen covering although a 1920 x 1080 image seems letterbox in fullscreen. My screen resolution was put to the native resolution of 1920 x 1080. It is clear that this slide show program only keeping the proportions of the image. Earlier this problem wasn't there. I think that the slide show program addresses in such a way that my monitor could have 16:10 display of report resolution l / h. thanks for giving me a solution.
This happens usually when the image resolution is high.
Keep your screen resolution of 1024 x 768 and it should work fine.
-
How to post JSON using the Oracle Data Service remains
I use the regular (not NoSQL or something) oracle database with oracle rest data service. Now I need to post data / put wrote in the body of the request using some json/xml format, how to consume them using the rest data service, searching inside the express application? important: using pl/sql block
Also, I am on,
Data service Oracle rest 3.0
Oracle Application Express 4.2
Post edited by: Jacynthe
OK, I got the answer. At the express request, there is a link called body variable (: body in BLOB). but the BLOB data type. So, we have to convert that in other data, type what we in pl/sql. I've converted data type witch CLOB supports json.
-
How do I export using the CC 2015 on DVD media encoder
How do I export using the CC 2015 on DVD media encoder
You will need to export mpeg2-DVD and then take it to a creation as a supplement program to create a DVD compatible file.
If you have CC, you can download it here again CS6 (it comes with Premiere Pro CS6):
How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team
-
How many users can use the unique apps?
How many users can use the unique apps?
A... the owner
Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations may NOT be used at the same time (noted in the link above of the license)
-
How can I use the CC of color under Windows?
How can I use the CC of color under Windows?
Or is it an online color Analyzer?
Hello
You can use CC to color online at the Adobe color CC. It is a great web app.
Sue.
Maybe you are looking for
-
I want to shoot video I Photos. Any advice?
I recorded the video on my iPhone 6 (iOS 9.2.1) style landscaping, but I want her to play like that. By mistake, I figured I could just shoot like photos, but appears not to be the case... and I'm new to Mac since I spent most of my life as a Lady of
-
How do I remove all photos of I phone
How to remove all photos of I phone
-
OfficeJet Pro 8600 Plus: network capability are not available
Dear Sirs, The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port. We've tried lately set up the wireless connection, and we couldn't. We received the message: network capabilities are not
-
Computer won't start windows after SP2 updated which runs without error messages.
HelloI have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to
-
-Pop-up notifications (mobile data and system update)
Hello.I am having some problems with the pop-up notifications. I'm on a prepaid monthly plan and sometimes my mobile data is not 'free' which means that I have fresh when I turn it on. Before I had a pop-up notification whenever I try to enable mobil