HOW DO I ACTIVATE AND UPDATE WINDOWS

Similar Questions

• How can I activate my Microsoft windows?

  How can I activate my Microsoft windows?

  Evelyn Hey,

  What version of Windows is installed on the computer?

  You can check the and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows/activate-Windows#1TC=Windows-7

  Thank you.

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• How can I download and install Windows 7.

  OT: Window 7.

  How can I download and install Windows 7. I use window 10. and there is more than 4 months then I updated to Windows 7. so there is no backup, so what do I do?

  Please see the bulletin:

  How to: Reinstall or restore your original Windows installation after having evaluated the 10 Windows

• WSUS - in a Windows 8 how know the source of updates, Windows Update or WSUS Web site

  WSUS - in a Windows 8 how know the source of updates, Windows Update or WSUS Web site.

  There is no powershell command (or other means) to learn if a Windows Client to get updates from WSUS (and details of the WSUS server) or the Windows Update Site.

  Moreover, in the history of Windows Update, knowing the source of the instalation (WSUS or Windows Update Web site).

  Thank you

  PQ ;-)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How can I remove and update Apple Safari App. ?

  How can I remove and update Apple Safari App. ?

  You must provide much more information.

  I hope that you are not really running OS X 10.4.8.

  What is the problem with Safari?

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• How do I cancel the update Windows and restore to the point in time

  Original title: How do cancel you a microsoft update & restore to the previous version, when it happened in the unknown past?

  Access to inside... I get the error this ActiveX component can't create object.  It didn't happen when I ran changed the access code of February or March 2014.

  I bought a new version of Norton Utilities.  They use the same basic logic to save the settings in their programs.  This does not work, and they made it the version or corrupt files that are required by the ActiveX.  Messages say it happened because of automatic updates from Microsoft.  How to get back some unknown update or restore point, as recommended in the post above?  Someone at - there a real fix for this update?  Or even a glimpse of how to solve the problem?  I tried dozens of things without a bit of luck to all!  Thank you.

  Hello Allen,.

  Thanks for posting your query in Microsoft Community Forum.

  According to the scenario, and from now on, I would say that you want to run system restore, and then try to install an update.

  Step 1: Perform the system restore

  To use the system restore

  Before you start the system restore, save open files and close all programs. System Restore will restart your PC.

  1. Open the system restore by clicking the Start button . In the search box, type System Restoreand then, in the list of results, click System Restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the wizard to select a restore point and restore your computer.

  Important: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. Utility Norton may also be removed.

  You can also check: System Restore: frequently asked questions

  Step 2: Do a selective (one) approach when you install updates.

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

  Note: Read and accept the terms of the license and then click on Finishing If the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Now, try the above steps and let us know the result, we will be happy to help you further.

  Thank you.

• How can I activate and save Microsoft Streets & Trips?

  I installed Streets & Trips, but cannot find how to activate and register the software.  I tried to help, but was not able to find the answer.

  Hello

  Check with the streets and the support of the TRIPS agreement

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspxp

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• BSOD in Windows 7 since the addition of Office 07 and updates Windows.

  How can I keep my computer from HP 1 month (Windows 7 Home Premium 64-bit) to close down and blue-screening at random times?  First thing I did when I got it was to slowly add programs I used on XP safely in the past.  I run Comcast w/McAfee and virus scan came negative.  However, just recently, I added Microsoft Office 2007 Ultimate Steal and updates the Microsoft appearing to all appropriate... I think that's when the trouble started.  Since then, I had random and/or closures crashes.  All the expert advice would be appreciated.  Thank you!!!

  Here's a common reason is given:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80036FA470
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\123109-17035-01.dmp
  C:\Users\Paul & Laura\AppData\Local\Temp\WER-34491-0.sysdata.xml

  Bug Check 0x1A: MEMORY_MANAGEMENT
  A value of 0x0000001A MEMORY_MANAGEMENT bug control a. This indicates that an error occurred serious memory management.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793604.aspx]

  This management mistake of memory is usually hardware related...
  [Source: http://aumha.org/a/stop.htm]

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793437.aspx]

  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) [emphasis] may cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).
  [Source: http://aumha.org/a/stop.htm]

  I don't think that the problem has nothing to do with after installing Office Ultimate 2007.

   

  -Online if the computer came with a free trial preinstalled, Norton STOP HERE! and reply to this message.

  ===============

  It is possible that the application of McAfee is originally these STOP errors. Discover:

  1. download the Setup program for Microsoft Security Essentials * (MSE), save the download to your desktop: http://www.microsoft.com/security_essentials/default.aspx

  2 close all applications (anything with an icon on the taskbar) open and repeat steps #1 and #2 (only) of the solution triple McAfee & reboot.

   

  3. IMMEDIATELY to make sure that the Windows Firewall is on 100%!

  4. close all applications (anything with an icon on the taskbar) open then right click on the file that you saved in step #1 above and select run as administrator to install MSE; Follow all the instructions.

  5. after the restart, manually & repeatedly updated MSE until you get one invite 'no more updates'.

  6 test cycle.

  If the behavior persists, contact HP Support as soon as POSSIBLE under your warranty or Service contract.

  ------------------------------------

  
  * I'm only using MSE as a Guinea pig here. You don't necessarily have to leave installed when we're done with our troubleshoointing but I wouldn't reinstall McAfee freebie just yet IIWY or if install any application of Norton.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I activate telnet in Windows XP Professional?

  I've seen several references to XP Professional with a built-in telnet server and the 'help and support' section seems to indicate that as well, but I darn if I can find detailed instructions on how the hell activate you it after 20 minutes of Googling to pages with forums and ask the same question, people usually being will have a link to the technet database. I tried to look for it, but kept getting instructions for Server 2003 who say to test with telnet in XP command line control.

  I want just a less cumbersome way to stop my main computer of the notebook on the cable network (in my room, the computer and I have a fake ethernet cable so I can access it from the bed I have wireless at home). I want to try telnet as it is less involved than remote desktop, and I can't do 'shutdown m \\slickswintel' at work (http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/how-do-i-use-the-shutdown-command-to-shut-down/645a45ee-d964-4f87-8c7e-98f446332c0e).

  I thought I'd try to telnet. If I can limit the 192.168.1.X subnet traffic security concerns shouldn't be a problem. Yes, I am well aware of the limitations and why Telnet has been replaced by SSH. It would be a problem if I was trying to participate via the internet, rather than an inTRAnet of small LAN home network with a router/switch device that manages the internet gateway.

  Could someone, give me a link to instructions for XP Professional? I don't even remember if I ever tried to set up telnet on Windows what it (server or workstation, even if it's a piece of cake to put in place under Linux (and SSH is simple too).

  My goal is to turn off the computer from across the room without getting up from the bed, so I can stick this laptop on the bedside table and to sleep with as little hassle as possible.
  Before suggesting the m \\slickswintel stop, read this:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/how-do-i-use-the-shutdown-command-to-shut-down/645a45ee-D964-4f87-8c7e-98f446332c0e

  I found this, which worked:
  http://www.Petri.co.il/enable_telnet_on_windows_2003.htm

  The essential line has been "tlntadmn config s =-NTLM '.
  I do not understand why I needed to disable NTLM authentication when both computers have been running Windows XP Professional, which had been upgraded to SP3. They were on the same switch as well. The firewall on the router/switch stateless only works on inbound connections from external (internet) interface, and I'm sure that it is rather a feature of the NAT because it does seem that the vs TCP UDP and port number...

• How can I reinstall the Update window. I continue to receive updates of WindowsUpdate_00000641 failed.

  "When I try to install this: ' MS12-025: Description of the update of security for .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 64-bit Edition, Windows Server 2003 PIatinum Edition, Windows Vista and Windows Server 2008: April 10, 2012", I get this "WindowsUpdate_00000641".  I uninstalled Iolo System Mechanic, that could be the problem.  I also have a problem (the same error code 0 x 80070641) installation of operation Flashpoint_Red River.  What to do next?  Fix - It's MS told me what was wrong (it "verified"), but it has not FIXED the problem.  It is said that some updated data is now stored in the wrong place.  I want to start and install Windows Update. How do I do that?  Thank you in advance for ANY advice you can provide.

  System Mechanic is your troublemaker & you have lots of company!

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem application has caused!

  TIP: If you ever think that your registry database must be cleaned, repaired, boosted, tuned-up, healed, twisted, fixed, enlarged, "swept" or optimized (and you need still more convincing that it's not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• How to stop notification of update Windows 10

  When I use Windows Update the new 10 Windows starts to download. The boxes are not checked. I tried Windows 10 but I didn't like it. I tired to click and hide the update but 10 downloads yet.

  Original title: Windows Update

  Hi Bill,

  Thanks for posting your query in Microsoft Community.

  If you do not upgrade to Windows 10 and stop Windows 10 notification on the screen, I suggest you try the following methods:

  Method 1: uninstall the update of Windows as follows:

  Remove the Windows Update KO 3035583

  If the problem persists, follow method 2.

  Method 2: R Ename the GWXUXWorker.exe

  Complete the GWX.exe process using the Task Manager. Also rename the GWXUXWorker.exe and the GWX.exe to .old as the location of the directory suffix: -.

  Windows\System32\GWX, if get any problems by renaming may give permission to respective filesystem and then try renaming again. OR you can remove the folder from the directory.

  

  If the problem persists, follow method 3.

  Method 3: The registry key to stop notification : -.

  1. Press Windows + R keys on your keyboard to open the Run dialog box.

  2. In the Open field, type regedit.

  3. Click on OK.

  4. Click Yes on the user account control (if prompted).

  5. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Gwx

  6. A right click.

  7. Click on change.

  8. In the data value: on the ground, DWORD: 00000001.

  9. Click on OK.

  10. Output the registry editor.

  Important this method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How can I download and install Windows Media Player?

  I'm running my laptop with Windows 7 and I want to download and install Windows Media Player.  I can't find the download to do this on the Microsoft Web site.  Can someone give me instructions step by step on how to do this?

  Hello

  Windows Media Player 12 is included in the editions of Windows 7 Starter, Home Premium, professional, Ultimate and Enterprise.

  To start Windows Media Player, click the button start , click all programs and then click Windows Media Player.

  Source + more info: http://windows.microsoft.com/en-us/windows/media-player-help?ocid=MEDPLA-WIN7_O_WOL_Hero_MedPla_MedPla_Null_01#media-player-help=windows-7&v2h=win7tab1&v4h=winxptab1

  See you soon,.

  J

• How to write insert and update blocks about with an if

  Hai All
  
  How to write an insert and update block education about with in an if
  
  I had a condition Ie
  
  If the time is between 0630 and 1030
  
  
  then
  
  Insert into Daily_attend
  ----
  
  
  Update Daily_attend set
  
  -----
  
  Concerning
  
  Srikkanth.M

  There is nothing preventing you to do this:

  BEGIN
    INSERT INTO x (mycolumn) VALUES ('A');
  
    UPDATE x
    SET mycolumn = 'B'
    WHERE mycolumn = 'A';
  
    COMMIT;
  END;
  /
  

  other than the fact that he seems a bit inefficient. Yet once you try to do, and why, is not clear.

  Can you put an IF statement in there to choose one way or the other under certain conditions? Yes. But I wonder if what you
  are actually trying to do is to reinvent the MERGE statement.
  http://www.morganslibrary.org/reference/merge.html