How ports usb 2.0 & 3.0 on the 610-1280qd?

Similar Questions

• How to usb + (kb + mouse) AUTO ACTIVATE when the computer reboots, lid closed, monitor attached?

  Can someone help me get this automated. I have a screen on my laptop, attached to the videoadapter. And a keyboard without wire-mouseset tied to a stick into the usb port. My laptop screendriver is defined to be monitored as one and only screen. So far so good. When I put my laptop asleep I can easily start with the wless-Ko by a movement of the mouse or any key. But I have to unrafle the laptop under my monitor when he meets a reboot, by countless updates automated Microsoft systemware or virusdata or, more often, my fault: loss of network. There is a shot of my original touchepath/KB only and insert-detachment of the usb link. I know it's a little cosmetic but when you see me handle these things you will agree its quite useful to have a workaround solution. Thanks for your help.

  Hello

  You can disable the USB selective suspend for USB devices feature and check if this solves the problem.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
  restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  To disable the selective suspend feature, follow these steps:
  a. click on start and then use the search box.
  b. type regeditand then click OK. The Registry Editor opens.
  c. look for, and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB
  d. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps:
  e. on the Edit menu, point to new, and then click DWORD.
  f. type DisableSelectiveSuspend , and then press ENTER.
  g. in the Edit menu, click on change.
  h. in the value data field, type 1 to disable the selective suspend feature, and then click OK.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• How many USB devices you can Garland to the latest Mac Mini?

  I need to connect several USB devices to my recent Mac Mini but it seems that if they are plugged directly into one of the 3 ports on the back, will not work.  Any ideas on that?

  You need a powered USB hub.

  Make sure you get 3 USB hubs say that will work with a Mac.

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

  I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

  Please tell which side are these ports and how to get the maximum speed out of them?

  Hi Hanazir,

  You'll love this.

  Get a bright light and shine on the left side of the laptop.

  Now, get a magnifying glass and look carefully next to the USB ports.

  3.0 ports are marked with the logo 'SuperSpeed '. "SS".

  Similar to this, but very, very small!

  

  To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

  There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

  Dragon tips

  USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

  Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

  It's my pleasure to help.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• How do you send netflix through my touchsmart 610-1280qd to my TV

  I can't understand how to stream netflix to my TV on my Touchsmart 610-1280qd.  I have no problem streaming from my Envy laptop but it is very hot (even with an external fan) and noise requires speakers.  I had a second monitor attached to the 610-1280qd, but he said to duplicate postings.  It does not work.  Disconnected secondary monitor completely - that didn't work.  I also had a failure of installing Chromecast on the 610. Is it possible to stream with a touch screen to a TV?

  Hooray, solved.  I had already set up a second monitor (using the hp video referenced in several responses) with a StarTech USB to DVI video adapter for the second monitor 2310 m older HP.  When I went to pick him up for the 'video USB connector"referenced elsewhere in the forum, I came across a dollar 20.00 adapter DVI to HDMI by GE (Walmart).

  By connecting this piece to the USB adapter to DVI video, it worked for access to television.  I have to unplug the adaptor DVI monitor cable and replace it with the DVI-HDMI adapter and HDMI cable (less than a minute), which allows me to watch netflix on my TV movies.  I will say that I would not have thought it with the forum, the news of cat info and visually see the possibility that the small DVI to HDMI adapter would work. Good luck to those who always try to watch television through their touchscreen.

  It seems to me that when there are 1100 more we try to see how to do this that HP would create a specific page or a video for us help to know how to "connect your touch screen to your TV.  I spent 3-4 hours trying to find information to solve a problem that shouldn't exist in the first instance. I don't understand why there is no video output on touch screens.

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• How ID USB 2 ports

  I have a desktop Dell running Windows XP Pro. When I installed a webcam, (a Microsoft LifeCam VX-5000) and plugged into a powered USB hub half lower part of the image that is displayed by the Webcam flickered. None of the webcam settings corrected this problem. I then plugged the webcam in one of the USB ports on the front of the computer, the flicker disappeared.

  The instructions say to "plug the webcam into a USB port powered", they do not specify USB 2. I wonder if the hub is not plugged into a USB 2 port. I looked in the Device Manager and cannot say if all ports are, or are not USB 2. I don't know what could cause this problem of flickering when connect to the hub.

  writing in the new message: * e-mail address is removed from the privacy... *

  I have a desktop Dell running Windows XP Pro. When I installed a webcam, (a Microsoft LifeCam VX-5000) and plugged into a powered USB hub half lower part of the image that is displayed by the Webcam flickered. None of the webcam settings corrected this problem. I then plugged the webcam in one of the USB ports on the front of the computer, the flicker disappeared.

  The instructions say to "plug the webcam into a USB port powered", they do not specify USB 2. I wonder if the hub is not plugged into a USB 2 port. I looked in the Device Manager and cannot say if all ports are, or are not USB 2. I don't know what could cause this problem of flickering when connect to the hub.

  In Device Manager, the word "Enhanced" will be in the description, as Standard Enhanced PCI to USB Controller.

  It is quite possible that the external hub is not compatible USB 2.0, or the cable from the hub to your PC isn't. Unfortunately, not all cables are created equal. If the cable between the hub and the PC is removable from the Hub, try another cable and see if that makes a difference.

  It is also possible that "" electrical"power of the hub noise interferes with the signal of the webcam.

  SC Tom

• How many ports usb this laptop there

  I want to buy hp pavilion g6 2305tx.but the problem is that it has only 2 usb ports. But I contacted a dealer and he told me that there are 3 ports.is it true? Please give me is hands on the review.and safe to use usb hub in the laptop? Please let know me. Thank you

  Hello:

  According to the below user's guide, Chapter 2, pp 3-5, there is a USB 2.0 port on one side of the laptop and 2 ports USB 3.0, the other side of the laptop.

  http://h10032.www1.HP.com/CTG/manual/c03529460.PDF

  I do not own a notebook of g6 model, so I can't provide any other information on it.

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• Question of port USB E3200

  Sorry if this question has already been addressed, but I couldn't find anywhere. I have a western digital 2 TB USB drive. It works fine on my intranet (my laptops and other devices can access). I have a sticky Ip address and would like to be able to access my drive to my work, but I don't know how to set up or if it can be put in place to work. USB possible transmitted port? I have the router E3200, Windows 7 operating system (if necessary)

  Thanks Jim

  What you want to do is go to FTP server area of the router on the @192.168.1.1 Storage tab and configure the port to use and what part of the disk that you want to share. Here's a guide for this.

  Also, make sure that you have chosen a password for the administrator account on the storage. If I remember correctly, it is different from the router password you choose.

  Then all you have to do is to get an FTP client and type the user name "admin" password, IP address and port number. FileZilla client is a good program.

  If you want to use a web browser, the format is ftp://youripaddress: Port number

  Don't forget to use your public IP (displayed in the status tab of the router) or you can set up a free dyndns account to make the format ftp://selected_url: Port number. In other words, unless you do not have a problem in recalling your static public IP address

• Serial com port USB displays error code 10

  When I did a check up on my computer (Windows 7 OS) this morning he said my serial port USB COM 3 would not start and had a code 10.  I went to the Device Manager and checked, and it says the same thing.  I clicked on update of drivers and it said that I had updated the drivers.  I plugged the USB things in the USB port and it worked fine.  I went to Device Manager and it still has the yellow mark with code 10.  How can I correct something that seems to work correctly?

  Thank you

  Shirley

  Hello

  1. did you restart the computer after uninstalling the USB device?

  I suggest to restart the computer and let Windows install the drivers automatically, or you can use the link below.

  Update drivers: recommended links

   

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this helps and keep us posted.