How the plant does not reset the option works? -iPad

Similar Questions

• How a plant does not reset work?

  HP Pavilion Notebook PC g6

  QC400AV

  Windows 7

  I had a problem with my intel graphics drivers not answer and then recover. Went online to a technician of remote access and they said I had a lot of internal applications that do not work and suggested I one of "their guys" go and do a job...

  I personally reinstalled drivers myself and yet the problem still persists. I must admit that my event log is full of errors. Something like 3 thousand eight months I had this computer. Brand new and it has errors, dating from the moment I out took it of the box. How could it be?

  Nevertheless, I would like to do a factory reset a trial. My question is what exactly is the point? I includes files such as doc, pix, vids will be erased; applications too. It actually restores all system files or is it more like a band-aid that corrects the errors?

  If there are better options what is it?

  Thank you for your time

  Donald

  Yes, Factory Reset reinstall everything just like it came from the factory. The trial version of Office I believe will be gone.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Set the style to null does not reset the attributes of police - Bug or feature?

  I call setStyle ("police - fx - weight:" BOLD "") with a label - the label text is in bold.
  Then I call setStyle (null) with the same label - now awaits the etiquette police returned to the definition of the CSS.
  
  But: the label does not indicate a normal font now - it's always "BOLD".
  I have to explicitly call setStyle ("police - fx - weight: normal") in order to bring it back to the normal font.
  
  Is this a bug or a feature?
  If it is a bug, so I'll post a message-Jira, but I'm still not 100% sure...
  
  My FX version is 2.2.
  
  Thanks + regards!
  Björn
  
  
  
  Code examples:

  package ztest;
  
  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class Test_62_FontStyle 
      extends Application
  {
      public static void main(String[] args)
      {
          launch(args);
      }
  
      boolean m_bold = false;
      VBox m_vb = new VBox();
      Label m_la = new Label("Some text to be styled.");
      Button m_bu = new Button("Change");
      
      @Override
      public void start(Stage primaryStage)
      {
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_vb
               )
               .build();
          
          m_vb.getChildren().add(m_la);
          m_vb.getChildren().add(m_bu);
          
          m_bu.addEventHandler(ActionEvent.ACTION,new EventHandler<ActionEvent>()
          {
              @Override
              public void handle(ActionEvent paramT)
              {
                  m_bold = !m_bold;
                  if (m_bold == true)
                      m_la.setStyle("-fx-font-weight: bold");
                  else
                      m_la.setStyle(null); // does not reset font!
  //                    m_la.setStyle("-fx-font-weight: normal"); // this works fine...
              }
          });
          
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
  }

  This is a known bug: setStyle (null) and setStyle("") does not cancel a previous call setStyle()

  https://JavaFX-JIRA.Kenai.com/browse/RT-25002

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Windows 10: lightroom does not allow me to work in the module development for more photo or two, and then it crashes!

  UGH!  After the update to windows 10 lightroom does not allow me to work in the module development for more photo or two, and then it crashes!  I tried to uncheck the graphic processor after finding the instructions on a forum, but it does not - this action also locked llightroom!  What I can do - I have several photo jobs who need treatment-HELP!  Arthur

  Hi arthurc70992816,

  Suggest you follow the instructions in this article:

  Adobe Photoshop Lightroom Help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  Try updating your graphics card drivers.

  Kind regards

  Claes

• Stop button does not reset LabView?

  Hello

  I did this VI (attached to this message), but whenever I have to use "continuous run", it seems that this gives the wrong result in the façade. However, it gives correct results when I add a random check on the block diagram and delete it immediately (technically speaking, nothing has changed at the blockdiagram) and after that, press 'run continuously.

  If the button "Cancel execution", which I use to stop the system does not reset my system? How to reset the system until I use it?

  In addition, below I watch 4 similar parts, if I use 25 of these parts in the same file, does it take much calculation effort or is it no big deal for LabView (on a basic computer?)

  

  Thanks in advance!

  Just do a simple state machine

• Percentage of system restore does not reset to zero

  I just built a PC W-7 with a SSD system drive and a hard drive for data.  At the end I was tired and selected the wrong drive (the hard drive) in 'System Protection '.  When I noticed my error, I set the SSD system ("restore system settings AND previous versions of files") then returned to the hard drive and set it to OFF ("turn off system protection").  However, I was surprised to discover that the cursor would not be travelling to 0% and stopped at 1%.  Is it possible to force it to 0%?

  Hello

  I tried to repro the issue and found that on each machine, once a system drive has been defined for the restoration of the system, the percentage of system restore minimum (use of the disc) does not reset to zero, even after the removal of all old restore points.

  The reason that I found is that once a system restore is enabled on a system drive, the system volume information folder create some system files that are hidden, which takes a little bit of space in the record, leading to 1% of the disk space.  These files can only be changed or deleted after formatting the disk or change the partition of the system drive to a normal drive.

  My research tells me that there is no way in which we could reset the slide to zero percent, minimum 1%.

• Take account of payments for secured areas does not include an option to tax

  Hello

  I am quite surprised to discover that the payments taken for secure areas does not include an option to tax. Nor making payments through Web forms include an option to tax. Only the basket has the tax calculation enabled.

  I'm the first person to have intended the tax to be collected for the sale of access to a secure area?  Someone at - it this problem?

  Pointers would be greatly appreciated!

  Gavin

  Why can you not put the t.t.c prices.?

  Or make your own country detection and calculate the cost on the fly on the form yourself?

• How your SEO does not work if you move your Web site to another host?

  How your SEO does not work if you move your Web site to another host?

  Thank you

  Michael

  Hi Michael

  Move single accommodation, should not influence seo. Change the site host requires a change in the location of the file, so no impact. However, I found a video that will understand this

  Let me know if you have any question.

• Mail does not completely download on my iPad Air.

  e-mails individual does not full download on my iPad Air.

  How do you mean? In the settings you can enable or disable to load remote images... which, in many cases, if you get a mail from bed, bath and beyond, say, their marketing emails are mostly a picture, and if you need to load remote images you will not get the image, just the words.

  If it's something else maybe if you gave some details that might be useful

• Macintosh: Adobe Muse; Formular Widget: Send button in Firefox does not (Mac, PC). Works in Safari (Mac) IE (PC). What is going on?

  Macintosh: Adobe Muse; Formular Widget: Send button in Firefox does not (Mac, PC). Works in Safari (Mac) IE (PC). What is going on?

  Test URL: News

  Greetings from cold Switzerland...

  Beat

  I think you have solved, as I tested it on my end and the Send button worked fine.

  Thank you

  Sanjit

• W530 does not reset the widows 8

  Okies, I've never had a problem until recently. Windows 8 came with this machine, and I've had problems of performance for a month now. I just soldered on until yesterday when I continued to get different blue screens and need to reboot... now it won't restart, and so I did the press ENTER to reach the area of the HDD... selected the option of quick reset troubleshooting, has no, so I went back and selected the full reset and it gets to about 65% and stops wrote there is a mistake and requiring a reboot... it happened two time... now when it restarts, it tries to do a reset again... without asking him.

  Can someone give me a help here? Is this normal? Normally I physically break a computer and never get to the point where it is necessary to reset... so I'm really at a loss here.

  It of a W530 and has 16 GB of RAM. Everything I run/ran on it photoshop and Lightroom, Firefox, Audacity, Roxio, Avast Protection against virus, online backup service and a program called Star stacker.

  What happened on my computer if I remember correctly, it is that backup files to win 8 were never installed in the correct area. So when he's going to do a wipe and reinstall... he wiped... but not a reinstall. The fix was to return and have installed a new hard drive.

  ALSO if you have fingerprint reader and especially the color calibration tool installed. Make a note on the repair to confirm that those who work corectly before sending it back. If it is under warranty, they will replace all that appears worn or damaged. When the mine back, cover the keyboard has been replaced due to minor damage.

  The calibrator replacement that came on the new cover of keyboard needs information from the screen, which has not been properly attributed in the repair center, so my Stallion does not work either. In the end, after two trips to the repair center, I got a new screen, hard drive, keyboard, reader of fingerprints and monitor color... and thirteen new gray hairs. :-D

• Apple Mail does not display an option "all" in the search

  Instructions for research in Apple Mail see the following options in the print screen: "All", "Inbox", "Sent", "Drafts", "Marked", etc.

  Apple Mail is not showing me the option 'All' - so all my research are partial. It's really hobbling search.

  How can I get the option 'All' to appear?

  Type your search term in the search field and these options will appear on the left edge of the toolbar: