How to access internet when the network is put in host-only mode

Similar Questions

• BlackBerry smartphone how to disable internet via the network, but leave the wi - fi on?

  Hi all

  I'm new to Blackberry but love until now.  I have a questionette for you to wizzo on something that left me speechless:

  My rate is not all internet at all (I'm only a poor pensioner!), but it seems that installation is there for me to use it if I do not pay attention if I want to turn it off permanently while installing wi - fi on.  This was possible on my android, but I gave to my wife because the screen is not too sensitive to my skin.  I got the Blackberry the the guy in the store where I bought it, but all he has done is disable data completely so now I can't use it on WiFi either.

  Can you tell me if this is possible and if so, how?

  Thanks in advance.

  As long as your data Services (under manage connections > Mobile Network Options) are lit, you will receive data via Wi - Fi.  When you turn on your Mobile network, you are turning ON the ability to receive calls and texts.  If you do not require these two features to be active (and therefore guarantee 100% that you use not any network data), then let your off Mobile network.  As you said, leaving the disabled Mobile network is similar to airplane mode.

  I hope that clears up any confusion.  Please post back if I'm not understanding something.

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• How to access internet throug a firewall of the Linksys router?

  Recently, I went to the ADSL2 + Internet broadband.

  So bought router "CISCO Linksys WAG120N" as my hardware firewall (FortiGate60) had no any port to connect to ADSL.

  Now I am accessing internet throug the Linksys router above and do not use the firewall because I don't know how to configure the firewall to get access to the internet through the firewall of the router.

  My previous broadband service was directly connected to the WAN port on the firewall because it was compatible.

  Please help me to configure the firewall to access the internet from the router through the firewall.

  Thank you

  You must configure the WAG120N in Bridge mode and then configure your firewall to your (probably PPPoE) internet connection.

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• How will I know when the synchronization is complete?

  Hello
  Is someone can you please tell me how do I know when the synchronization is complete?

  I paired a device (smart phone Samsung) - it worked good 10 minutes, yet on my phone says sync is complete, but any of the bookmarks do not appear on my computer 'main '.

  Hello.

  It is possible to "Synchronize now" in the version of office when you go to tools > synchronize now
  You can check the timestamp of the last synchronization status in the topic: config page one and find the last sync, and there will be a timestamp it. Firefox Sync troubleshooting and tips for more information.

• Stolen phone. How can I check when the last time saved my phone to my laptop (without my iphone of course)?

  My iPhone was stolen. How can I check when the last time that I backed up my phone to my laptop without my iPhone?

  Click here and either use iTunes to check or browse to the path of the backup manually.

  (142338)

• How will I know when the capsules are on?

  Original title: caps Inspiron 1545?

  How will I know when the capsules are on?

  Hey, Vince,.

  Caps lock key are you referring?

  If you look above the keyboard on the right, you will see two fires instead of one.

  In addition, you will type in uppercase when the key is turned on

  

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  my computer is locked in the options admistritive and I for got my password. How to access and fine the password or change it?

  Hello dianeweeks,

  Thanks for the reply.  I have included a link below that I hope will help.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Bluetooth decreases when the network signal changes

  Hello guys,.

  Since the last update (23.5.A.1.291) my bluetooth devices (headphones, speakers, etc. I've tried several) are not functioning normally. Bluetooth keeps disconnecting and then reconnect. I thought it was random at first, then I thought it was when my network signal was change, for example when it goes from 4G to 3G, it disconnects (even when the network signal is also 2 bars 3).

  You have a solution, this is done on my nerves...

  Thank you

  Concerning

  I made this https://www.reddit.com/r/SonyXperia/comments/2mdmuk/getting_throw_function_to_workalternative/ and it worked.

• will be failover testing with success when the network between the site of protect and recover is broken

  Hi friends,

  When the network between the site of protect and recover is broken, will be the successful test SRM failover?

  Thank you.

  Hello

  There was a theme with exactly the same question, but I'm not.

  IIRC, the answer was: it depends on storage / Some SRA. of them need connectivity.

  Michael.

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.