How to burn movie to dvd disc to make it work on drive dvd/tv and computer at the same time

Similar Questions

• How to play music and narration at the same time on windows movie maker?

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  =================================
  Simple solution... Publish (save) your project in the
  film format .wmv to a folder on your hard drive.

  Re-import the file .wmv (as a new project) and now
  audio / music will be clear and you can add
  the narration.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• on the Iphone 7. How to listen to music, if we have a normal headset and charge at the same time?

  How to listen to music, if we have a normal headset and charge at the same time?

  < re-titled by host >

  It sopposed must be a wireless charging dock to be launched shortly if the dock does not so it is a disappointment

• How do I get the acceleration and GPS at the same time?

  Goal: Get an acceleration and GPS at the same time

  Current situation: I can get acceleration or GPS. When I try to get the data, the code ends.

  Mini Code

  If (bps_event_get_domain (event) == sensor_get_domain()) {}
  handle_acceleration_data();
  }
  If (bps_event_get_domain (event) is {geolocation_get_domain()})

  handle_gps_data();

  }

  Question: Anyone know how to get data in an event or other methods?

  Thank you for your attention,

  Your code shows event handling, but not the request or to obtain events.  Can you show more of your code?  The following should work (note there is no error checking):

  sensor_request_events(SENSOR_TYPE_ACCELEROMETER);
  geolocation_set_period(1);
  geolocation_request_events(0);
  
  bps_event_t *event;
  while (true) {
  
      bps_get_event(&event, -1);
      if (!event) {
          continue;
      }
  
      if (bps_event_get_domain(event) == sensor_get_domain()) {
          handle_acceleration_data(event);
      } else if (bps_event_get_domain(event) == geolocation_get_domain()) {
          handle_gps_data(event);
      }
  }
  

• How to share the Image and the text on Facebook and Twitter at the same time?

  Hi, I made a text box enter the text and also produce the selector to choose the image.

  So I text and the imagePath.

  How to share this text and image for facebook and twitter at the same time?

  (the example is like checkin on Foursquare app for BB10)

  [* If you use the invocation sharing, I can't pick one, ex: come share on facebook]

  Thank you

  It is not currently supported.

  http://supportforums.BlackBerry.com/T5/native-development/share-text-and-photo-for-the-same-invocati...

• I bought a disc of Lightroom6 for Mac. Can I use the license even om my two ibooks and iMacs at the same time? Given that the macbook air doesn't have a hard drive, is it possible to copy on a USB drive?

  I bought a disc of Lightroom6 for Mac. Can I use the license even om my two ibooks and iMacs at the same time? Given that the macbook air doesn't have a hard drive, is it possible to copy on a USB drive?

  You have two activations and no more. If you need to register a third party, you will need to purchase another package. Yes, the installers can be copied to any media that you consider appropriate.

  Mylenium

• How to fix sound coming speakers and headphones at the same time?

  My computer old enough, I'll tell you that. I bought it on ebay with Windows XP pre-installed, and I uninstalled it instantly to I can have the pleasure of installing Windows Me (because I'm a little strange) with an installation disc, I had to hang out. Everything worked fine, until one day I decided to install Windows NT 4.0 and that pretty well done the sound somehow. To resolve this problem when I reinstalled XP, I found a driver that worked perfectly. With XP, I've had no problem with the sound since I installed the driver; the sound comes through the headset when it is plugged and through the speakers when my headphones are plugged into.

  Now, here's the problem. I installed Windows 7 Home Premium last night, as it came with another computer that broke some time ago. It works perfectly, just a little slow because my computer is old. Of course, I expect to have to install the audio driver again, as I formatted my hard drive before installing 7. So I downloaded the driver from the same place, as I always do, site Web of Realtek. After installation, the sound works fine - but it comes out through the speakers and the headphones at the same time.
  I tried to plug my headphones into the Jack located on the front of the computer and back, and it's still having the same problem. He has nothing else connected to the computer but the monitor, keyboard, mouse and wifi adapter.
  Windows 7 is the only OS by far that has had this problem on this computer. Strangely, on the computer on which he came with, I have no trouble. I plugged it right in there and badabing badaboom, everything was perfect.
  So I don't understand why it does not work on this computer. If necessary, my audio device in the sound options is Realtek AC 97 Audio.
  Any help would be appreciated!
  Hello

   

  Thank you to ask a query in a Microsoft Community.

   

  I understand that you have problems with the audio devices with the Windows 7 operating system.

   

  I have a few suggestions that you can try to solve the problem.

   

  Please refer to the suggestion of Mouneshwar R replied on August 28, 2010.

   
  How to stop sound play two headphones and speakers
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/how-prevent-sound-from-playing-through-both/4d65f6fb-873c-4154-8dd1-638877c6e4a1
   
  Hope this helps, if not, please respond to this line, and we will be happy to help you again.

   

  Thank you

• How to collect data on the programs of LabView and VC ++ at the same time?

  Hello

  There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.

  Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be

  less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.

  I think on the use of network socket to get the message for both applications.

  I was wondering if there is a better way.

  Thank you.

  MARK002-MAB wrote:

  Hello

  There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.

  Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be

  less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.

  I think on the use of network socket to get the message for both applications.

  I was wondering if there is a better way.

  Thank you.

  You do not say if two programs access the same material, but I guess not. Because if they did, you probably get conflicts when the two programs try to access the same material at the same time.

  In either case, the only really reliable way to ensure that your needs of< 1ms="" would="" be="" hardware="" triggering.="" one="" hardware="" unit="" is="" programmed="" to="" provide="" a="" hardware="" trigger,="" typically="" a="" digital="" signal="" and="" the="" other="" is="" programmed="" previous="" to="" the="" desired="" start="" point,="" to="" wait="" for="" that="" trigger="" and="" start="" automatically="" when="" it="" is="" received.="" if="" both="" hardware="" units="" are="" ni="" daq="" cards="" you="" can="" do="" that="" fairly="" easily="" using="" the="" rtsi="" bus="" or="" in="" case="" of="" pxi="" the="" pxi="" trigger="" lines.="" if="" they="" are="" different="" hardware="" then="" it="" can="" get="" more="" complicated="" to="">

• How can I have Windows 8 and Windows XP on a computer at the same time?

  Now, the computer is Windows XP. My ICT SBA require to use windows XP for better compatibility. How can I have 2 types of windows on 1 computer?

  A few months ago I installed Windows 8 client Preview of XP and I deleted the WIndows XP.
  Now, I have two systems at the same time, so I installed XP again, but the two windows of the failure to run (DLL and kernel problems).
  Then I installed XP again and the format of the drive that contains the Windows 8, I finally install XP on this drive.
  After that, I tried to install version 8 for Windows but I said that I can't keep the XP data, instead of keeping the whole OS.
  I find some articles online, but they introduce only have Windows 7, I can add XP...
  (I have two internal hard drives and an external hard drive)

  It pretty much applies to Windows XP, too. (Microsoft has removed most Windows XP of the database-specific help pages already.)

  Don't forget that Win8 PR is still a beta version.

  PS: Speaking of upgrade to Win8, you might find this interesting-online http://windowsteamblog.com/windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-windows-8-pro-for-39-99.aspx

  [Last updated - July 11, 2012, 06:27 UTC]

• How to register via the microphone port and play at the same time?

  How to record via mic port and at the same time I playt byport ?

  cs6 hearing support, or any other software would help?

  Your screenshot was a little small so I zoomed in on one of my friends... the 'I' is the area click on my yellow arrow is pointing:

  

• How to use the two counters to PXI-6280, to read and write at the same time?

  Hi all

  I try to use PXI-6280 counter to generate a command of step motor pulse train.  The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.

  Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.

  Thanks in advance,

  Giavonna

  Electrical engineer

  I'm afraid that I don't understand your idea. Could explain you better?

  Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter).  If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter.  There should be examples in the finder of the example shows how to configure a finished task of digital output.

  Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.

  I don't think not just single point NI the hardware, that's what you want.  More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.

  Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?

  Yes, but it's a little tricky.  You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry.  Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output.  Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal).  When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause.  You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).

  Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here .  It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).

  Is there a way to read pulses them how have been generated, without the other counter, counting impulses?

  N °

  Best regards

• I have iphone and an ipad.  I need to synchronize the two and have at the same time on this new computer.  How do I do that?

  All the updated IOS iPhone.

  iPad - last update complete AIO

  new computer - laptop HP with Windows 10

  I need to sync my iphone and ipad to this computer - both have different things on them, but are most of the exact time.  Missing a few songs and contact.

  How can I do both appear on my computer without calling to zero one over the other?

  See this - http://www.apple.com/icloud/setup/

• How to scramble several images and faces in the same time

  I hold many faces in a video I am change the blur.

  As far as I know, I can only blur a face/image using the tool of censorship.

  Is there a simple way to blur more than one image/facing the same shooting video?

  Thanks a lot for your help!

  My best,

  Nick

  ONCE we duplicated the layer stack, blurred the bottom layer and then cut mattes with borders rounded through the lower layer.

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards

• How to use Notepad and utube at the same time on an ipad?

  Is there a way to mulitask with two apps on the iPad, I want to take notes while watching a utube video?

  only on the most recent iPads that supports multitasking side by side