Similar Questions

• How to remove services that are no longer used.

  Hi, I have a lot of services on my machine, 200 to be precise. Some are running, and some are in a stopped state. My machine starts at a reasonable speed, so it's not a problem. But after the start and after all the noise of caching calmed, I used up to 3.5 on 16 GB memory. I guess that a lot of this memory is consumed by unnecessary services running.

  So is it possible to remove some of these services without having to reformat my HARD drive? And with them cripples my vital 3rd party software?

  If you are referring to RAM and use only 3.5 GB on a total of 16 GB, you have nothing to fear.  You won't win any show by mucking around with services.

  What exactly do you hope to achieve?

  If you really want to disable some services - not to "remove" their - go here and then go to the page corresponding to your version of Windows--> http://www.blackviper.com/service-configurations/

  Before you do anything, however, read all the documents text at the top of any page reach you, including the Introduction, Notes for a computer more happy and user and the explanation of table header.  Read also How to install or uninstall services in Windows 7?

  The preceding two paragraphs and related material only relate to Windows services.  If you have services installed by 3rd party programs, let alone unless or until you uninstall these programs.

• How to close programs that are running in the background and what services are safe cut

  under windows xp with sp3, I hear something running in the background, but no photo with her, how I close it, also how do you know which windows services are safe to clog then start and stop can be a little faster?

  For performance tweaks that I would recommend looking at http://www.tweakxp.com/performance_tweaks.aspx they have a great compilation of good settings you can do and more are step by step, so even the most novice person can perform these tasks. Insofar as something running in the background of his always possible, you have some kind of malware running I want to run a scan for these emissions.

• I have more than 3 instances that are running on the Linux machine? How can I determine which shared memory and semaphores are associated with the instance?

  Pleace help me
  

  
  

  Thank you

  Oh yes

  Please check again

  SQL > setmypid oradebug

  SQL > oradebug CPI

  SQL > tracfile_name oradebug

  Thank you

• How can I create a cluster of two instances that are running on the same server?

  Hello
  I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
  Could you please help?
  
  Thank you

  Hello
  Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:

  http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]

  and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).

  Please use the "application level" collection that you get out of the box with the multimaster replication.

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc

  HTH,
  Marco

• I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  Hello

  Contact the Support of IDM in this regard.

  The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.

  http://www.internetdownloadmanager.com/download.html

  See you soon.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• View the programs that are running on the remote computer.

  How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

  Do you mean the Task Manager?

  If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  You might also find something in the PsTools collection...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

• While closing, programs are pending and that I still have programs that are running, but actually I don't

  Hello

  I close all programs and then I closed my laptop but I see message programs are pending and that I still have programs that run, but actually I did not! I close all! and then after a few seconds it just stops himself well. In my view, there is a problem, why I see this message?

  This time, when I stopped my laptop a blue screen appeared saying windows is recovering from an unexpected shutdown. This was not unexpected at all, I closed all programs and all just stop it!

  From elsewhere when I press ctrl + alt + del and start the Task Manager I see not all programs that are running.

  It's a windows 7 64.

  I see message waiting programs so that I still have programs that run, but actually I did not!

  Actually closing manually request does not mean that it is not running

  Some of the startup item typically run in the background

  There is no additional work Windows doesn't do, what application you are running is to show

  All you can do is try to disable all start once and go to the service tab and select below "hide all Microsoft services and disable and to apply, it will ask the start/stop and see same problem is happening or not."

  Press win + r > type "msconfig" and enter and click on start and select Disable all and restart

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• How to find what processes are running on my computer and use it from memory?

  * Original title: find running processes

  How to find what processes are running on my computer and use it from memory?

  You can press Ctrl-Shift-Escape to see which processes are underway and those who is using memory (and how much they use).  Although the memory usage is not as important as how they use lots of CPU, which is what can make your computer slow if there are too many programs use the CPU at the same time.  For memory, even if she says that he uses a lot, an inactive program ' pages on "memory to the hard disk and it frees room for other programs to use, is not as important as the CPU generally (unless you are very very low on memory).

• the triggers that are running when create, Alter, Drop of orders

  Hello
  I use oracle 10g. I want to create triggers that are running when create, Alter, Drop executed orders .How can I do this...

  Offcourse.

  Let's look at this code

  create to replace trigger prevent_drop
  before the fall on Practice.schema
  Start
  If ora_dict_obj_owner = "PRACTICE".
  and ora_dict_obj_name like '% BOO '.
  and ora_dict_obj_type = 'TABLE '.
  then
  RAISE_APPLICATION_ERROR)
  -20002, 'operation not allowed.');
  end if;
  end;

  better compliance
  skyniazi

• are you able to delete all old microsoft security updates or other old updates for programs that are running on my computer?

  in Add or remove programs on my computer there are a ton of old program updates from 2008 to 2011 and I want to know if I can remove all but the updates for programs that are running on my computer?

  Hello

  You can clean your system using the disk Cleanup utility to remove unwanted programs from your system. Click on the link below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

• Many services that are not started in the Windows XP computer.

  Original title: WIN XP has deteriorated
  Seems a great number of services do not start and are lost.  This causes a lot of things I don't like:
  No Clipboard
  No audio
  No spool printer
  Impossible to move files
  Cannot use the system restore
  etc.

  My CPU get - online, most of the work programmes, but these limitations are really more than annoying.  I spent hours to read and do all kinds of things, but alas the notng seems to work.  I created an image of the CD from my WIN7 CPU.  No change.  * Sigh *.

  I am sad.

  If sfc/scannow you help, I'll send you or your charitable organization preferred $100 Americans.  So far, I'm zero dollar.

  What you mean:

  No Clipboard

  Do you mean that you are unable to start the ClipBook Service?

  If you try to get an error 1068, that's because the ClipBook Service has a dependency (see the Dependencies tab) and who would be the network DDE Service and who does not start because it also has a dependency of the Network DDE DSDM Service.  So they all have to work for the ClipBook Service starts.

  I would say that normally keep all that junk disabled unless you think you have a good reason for them to run at all.

  What you - services are lost?  They lack the Services Applet?

  Which are absent?

  What a Win 7 has to do with this XP system (hopefully nothing).

  I would like to run some malicious software scans everything first, then we can see about getting your Services back together.

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Then just choose a Service - like your print spooler and try to launch and operate.

  Describe what happens when you try to start it (next to her does not work).  If you ever get an error 1068 you try to start a Service, you must open the properties/dependency tab and see what needs to be executed first and start them (such as the remote procedure call (RPC) Service).  The RPC Service should be running all the time in any case - is - it?  I f it does not work, run it, and set the Startup Type to automatic.

  If your Service of print media is totally absent from the Service Applet (it happens sometimes), I am sure, that a Microsoft Support engineer can say to it add.

  If they can't, I'll do it.

• How to call service decision of business rules in soa suite 11 g?

  How to call the service of the decision of my business rules in SOA 11 g.
  
  I have an invoke activity in my bpel process that calls my decision to the dictionary service, BUT
  
  It fails to say that the attribute "name" (NCNAME type) has an invalid value when calling the method "callFunctionStateful" / "callFunctionStateful"!
  
  What value to spend in this attribute? Help, please.
  
  Entry:
  
  < input >
  < callFunctionStateful_InputVariable >
  < name of party 'payload' = >
  < name callFunctionStateful = "" >
  < parameterList >
  < customerdetails >
  kamale < name > < / name >
  Kolkata < address > < / address >
  male < sex > < / sex >
  < > 54355 cellnumber < / cellnumber >
  < / customerdetails >
  < / parameterList >
  < / callFunctionStateful >
  < / part >
  < / callFunctionStateful_InputVariable >
  < / Entry >
  
  
  Fault:
  
  < bpelFault > < faultType > < message > 0 < / message > < / faultType > < remoteFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > oracle.fabric.common.FabricInvocationException: failed the validation schema for load of message part. Please ensure that at the level of the sender of the message that the sent data are consistent schema. < / Summary > < / piece > < part name = "details" > < retail value > invalidated "for attribute: 'name' < / detail > < / piece > < part name ="code"> < null code > < / code > < / piece > < / remoteFault > < / bpelFault >

  Specify the name of the decision function as specified in the file .decs under the tag

  Concerning
  Albin I