How to change the points after the insertion of a shape of the leaf?

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How to change the color of the Apple Watch pointer?

  How to change the color of the Apple Watch pointer? In the style of color Apple Watch ca change you the color of the masince, complication, brands, etc. However, the needle of the hours and minutes remains white and red dark second pointer. Is there a way to set the pointers to become Gold?

  Hello

  It is not currently possible to customize the color of the hand or the second on the color dial hand.

  If a customization option is not specified for any feature of any particular face watch, then it cannot be customized.

  More information:

  https://help.Apple.com/watch/#/apd6ce85daf4

• How to change the language in after effect

  How to change the language in after effect

  Start here.

• How to change the DBID of cloned after cloning database?

  Hello
  
  After cloning, the DBID of primary and cloned database have the same DBID.
  I want to know how to change the cloned instance ID?.

  See these examples

  http://gavinsoorma.com/2009/07/change-dbid-of-database/
  http://docs.Oracle.com/CD/E11882_01/server.112/e22490/dbnewid.htm
  http://fugoconsulting.WordPress.com/2011/06/20/changing-dbid-in-Oracle-database/

• How to change the Point of guide to InDesign

  Hi all

  How to change the reference Point InDesign using InDesign CS3/Javascript/Windows.

  Kind regards

  REDA

  Hey!

  Try this:

  app.activeWindow.transformReferencePoint = AnchorPoint.BOTTOM_RIGHT_ANCHOR;
  

  Values:

  AnchorPoint.BOTTOM_CENTER_ANCHOR
  AnchorPoint.BOTTOM_LEFT_ANCHOR
  AnchorPoint.BOTTOM_RIGHT_ANCHOR
  AnchorPoint.CENTER_ANCHOR
  AnchorPoint.LEFT_CENTER_ANCHOR
  AnchorPoint.RIGHT_CENTER_ANCHOR
  AnchorPoint.TOP_CENTER_ANCHOR
  AnchorPoint.TOP_LEFT_ANCHOR
  AnchorPoint.TOP_RIGHT_ANCHOR
  

  --

  tomaxxi

  http://indisnip.WordPress.com/

• How to change the text after the script to the Calendar Wizard creates a calendar

  I mainly work with Photoshop, so I am new to the world of InDesign.  I put my options for the Calendar Wizard script, it goes through the motions, making the calendar and then shows my finished product.  The problem is that it lists the year alongside each month: may 2012 June 2012, etc, and I need to remove '2012' of each of them.  I know that the font styles updates the entire calendar when they are applied, so I hope that it works in a similar way.  I guess it is a very simple task if you are familiar with the program, haha!

  Thanks in advance for any help!

  It sounds more like you ask how to delete 2012 of several pages, and not how to change the script to not put 2012 in all first. If I'm wrong about this, you may want to ask on the Forum script.

  An easy way to remove 2012 is to use find/replace. If you are looking for 2012 and do not fill the field exchange, she will replace 2012 with nothing. In the Find/Replace window, there is a field that will allow you to search for the location of the cursor to the end of the current history, the history, the stories in the document or all open documents. If you set it to the Document, you can use the search button to find the first instance, and if you want to remove it, you can hit replace them, replace/find (what will change and find the next instance), or change everything. I would replace/find, in case you have 2012 on another part of the calendar that you want to keep. You can also have it search the text only when it has a particular paragraph or a character style and put in place the same or a different paragraph or character style. To do this, click in the boxes of Format change or find. To clear out them, hit the small icon of the Recycle Bin next to the field.

• Portege S100: How to change the RAID in the BIOS

  Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
  Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

  I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

  This is the same as that recorded in this link: -.
  [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

  I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

  Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
  The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

  If the second HDD was inserted and then change the RAID in the Windows operating system.
  There should be a Toshiba RAID Console.
  You can use this console to create or manage a RAID array.

  To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
  It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

  But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

• How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  =================================
  Media Player Classic should read the .3gp files...

  Media PLayer Classic
  http://download.CNET.com/Media-Player-Classic/3000-2139_4-10518778.html

  For conversion... the following freeware can be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the
  main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).

  

• How to change the Spry CSS tab

  I like to use these old screens provided with the former DW Spry tab.  I just looked in DW CC and it looks like they aren't there and more.  But anyway, I made one for my client.  Now, they want to get one of the tabs on the far right of the margin.  See the image below:

  

  I don't know yet if it's possible to do and if someone has done this before, can you tell me what code I need to change in the CSS?  I would have joined the CSS file, but it seems that you cannot attach files in this forum, so I've copied below.

  Please offer any means to change the color of the tabs, etc. - I just need to know how - or at all - this tab can be moved to the right.

  Thanks, Guy deaf

  PS I'm sorry that the CSS code does not correctly appear in this forum.  When I type this message, looks like it will display line-by-line, but it's not.  I'm sorry.

  ---------------------------------------------

  @charset "UTF-8";
  
  
  /* SpryTabbedPanels.css - version 0.6 - Spry Pre-Release 1.6.1 */
  
  
  /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
  
  
  /* Horizontal Tabbed Panels
   *
   * The default style for a TabbedPanels widget places all tab buttons
   * (left aligned) above the content panel.
   */
  
  
  /* This is the selector for the main TabbedPanels container. For our
   * default style, this container does not contribute anything visually,
   * but it is floated left to make sure that any floating or clearing done
   * with any of its child elements are contained completely within the
   * TabbedPanels container, to minimize any impact or undesireable
   * interaction with other floated elements on the page that may be used
   * for layout.
   *
   * If you want to constrain the width of the TabbedPanels widget, set a
   * width on the TabbedPanels container. By default, the TabbedPanels widget
   * expands horizontally to fill up available space.
   *
   * The name of the class ("TabbedPanels") used in this selector is not
   * necessary to make the widget function. You can use any class name you
   * want to style the TabbedPanels container.
   */
  .TabbedPanels {
    overflow: hidden;
    margin: 0px;
    padding: 0px;
    clear: none;
    width: 100%; /* IE Hack to force proper layout when preceded by a paragraph. (hasLayout Bug)*/
  }
  
  
  /* This is the selector for the TabGroup. The TabGroup container houses
   * all of the tab buttons for each tabbed panel in the widget. This container
   * does not contribute anything visually to the look of the widget for our
   * default style.
   *
   * The name of the class ("TabbedPanelsTabGroup") used in this selector is not
   * necessary to make the widget function. You can use any class name you
   * want to style the TabGroup container.
   */
  .TabbedPanelsTabGroup {
    margin: 0px;
    padding: 0px;
  }
  
  
  /* This is the selector for the TabbedPanelsTab. This container houses
   * the title for the panel. This is also the tab "button" that the user clicks
   * on to activate the corresponding content panel so that it appears on top
   * of the other tabbed panels contained in the widget.
   *
   * For our default style, each tab is positioned relatively 1 pixel down from
   * where it wold normally render. This allows each tab to overlap the content
   * panel that renders below it. Each tab is rendered with a 1 pixel bottom
   * border that has a color that matches the top border of the current content
   * panel. This gives the appearance that the tab is being drawn behind the
   * content panel.
   *
   * The name of the class ("TabbedPanelsTab") used in this selector is not
   * necessary to make the widget function. You can use any class name you want
   * to style this tab container.
   */
  .TabbedPanelsTab {
    position: relative;
    top: 1px;
    float: left;
    padding: 5px 20px;
    margin: 0px 1px 0px 0px;
    font: bold 12px sans-serif;
    background-color: #f1c185;
    list-style: none;
    border-left: solid 1px #CCC;
    border-bottom: solid 1px #999;
    border-top: solid 1px #999;
    border-right: solid 1px #999;
    border-radius: 5px 5px 0px 0px;
    -moz-user-select: none;
    -khtml-user-select: none;
    cursor: pointer;
  }
  
  
  /* This selector is an example of how to change the appearnce of a tab button
   * container as the mouse enters it. The class "TabbedPanelsTabHover" is
   * programatically added and removed from the tab element as the mouse enters
   * and exits the container.
   */
  .TabbedPanelsTabHover {
    background-color: #ffd197;
  }
  
  
  /* This selector is an example of how to change the appearance of a tab button
   * container after the user has clicked on it to activate a content panel.
   * The class "TabbedPanelsTabSelected" is programatically added and removed
   * from the tab element as the user clicks on the tab button containers in
   * the widget.
   *
   * As mentioned above, for our default style, tab buttons are positioned
   * 1 pixel down from where it would normally render. When the tab button is
   * selected, we change its bottom border to match the background color of the
   * content panel so that it looks like the tab is part of the content panel.
   */
  .TabbedPanelsTabSelected {
    background-color: #ffe9cd;
    border-bottom: 1px solid #EEE;
  }
  
  
  /* This selector is an example of how to make a link inside of a tab button
   * look like normal text. Users may want to use links inside of a tab button
   * so that when it gets focus, the text *inside* the tab button gets a focus
   * ring around it, instead of the focus ring around the entire tab.
   */
  .TabbedPanelsTab a {
    color: black;
    text-decoration: none;
  }
  
  
  /* This is the selector for the ContentGroup. The ContentGroup container houses
   * all of the content panels for each tabbed panel in the widget. For our
   * default style, this container provides the background color and borders that
   * surround the content.
   *
   * The name of the class ("TabbedPanelsContentGroup") used in this selector is
   * not necessary to make the widget function. You can use any class name you
   * want to style the ContentGroup container.
   */
  .TabbedPanelsContentGroup {
    clear: both;
    border-top: solid 1px #999;
    background-color: #FFF;
  }
  
  
  /* This is the selector for the Content panel. The Content panel holds the
   * content for a single tabbed panel. For our default style, this container
   * provides some padding, so that the content is not pushed up against the
   * widget borders.
   *
   * The name of the class ("TabbedPanelsContent") used in this selector is
   * not necessary to make the widget function. You can use any class name you
   * want to style the Content container.
   */
  .TabbedPanelsContent {
    overflow: hidden;
    padding: 4px;
  }
  
  
  /* This selector is an example of how to change the appearnce of the currently
   * active container panel. The class "TabbedPanelsContentVisible" is
   * programatically added and removed from the content element as the panel
   * is activated/deactivated.
   */
  .TabbedPanelsContentVisible {
  }
  
  
  /* Vertical Tabbed Panels
   *
   * The following rules override some of the default rules above so that the
   * TabbedPanels widget renders with its tab buttons along the left side of
   * the currently active content panel.
   *
   * With the rules defined below, the only change that will have to be made
   * to switch a horizontal tabbed panels widget to a vertical tabbed panels
   * widget, is to use the "VTabbedPanels" class on the top-level widget
   * container element, instead of "TabbedPanels".
   */
  
  
  .VTabbedPanels {
    overflow: hidden;
    zoom: 1;
  }
  
  
  /* This selector floats the TabGroup so that the tab buttons it contains
   * render to the left of the active content panel. A border is drawn around
   * the group container to make it look like a list container.
   */
  .VTabbedPanels .TabbedPanelsTabGroup {
    float: left;
    width: 10em;
    height: 20em;
    background-color: #EEE;
    position: relative;
    border-top: solid 1px #999;
    border-right: solid 1px #999;
    border-left: solid 1px #CCC;
    border-bottom: solid 1px #CCC;
  }
  
  
  /* This selector disables the float property that is placed on each tab button
   * by the default TabbedPanelsTab selector rule above. It also draws a bottom
   * border for the tab. The tab button will get its left and right border from
   * the TabGroup, and its top border from the TabGroup or tab button above it.
   */
  .VTabbedPanels .TabbedPanelsTab {
    float: none;
    margin: 0px;
    border-top: none;
    border-left: none;
    border-right: none;
  }
  
  
  /* This selector disables the float property that is placed on each tab button
   * by the default TabbedPanelsTab selector rule above. It also draws a bottom
   * border for the tab. The tab button will get its left and right border from
   * the TabGroup, and its top border from the TabGroup or tab button above it.
   */
  .VTabbedPanels .TabbedPanelsTabSelected {
    background-color: #EEE;
    border-bottom: solid 1px #999;
  }
  
  
  /* This selector floats the content panels for the widget so that they
   * render to the right of the tabbed buttons.
   */
  .VTabbedPanels .TabbedPanelsContentGroup {
    clear: none;
    float: left;
    padding: 0px;
    width: 30em;
    height: 20em;
  }
  
  
  /* Styles for Printing */
  @media print {
  .TabbedPanels {
    overflow: visible !important;
  }
  .TabbedPanelsContentGroup {
    display: block !important;
    overflow: visible !important;
    height: auto !important;
  }
  .TabbedPanelsContent {
    overflow: visible !important;
    display: block !important;
    clear:both !important;
  }
  .TabbedPanelsTab {
    overflow: visible !important;
    display: block !important;
    clear:both !important;
  }
  }
  

  !-[CodeBlockStart:dffe5525-a787-4a98-a87f-f24554b12141]-->@charset 'UTF-8'; / * SpryTabbedPanels.css - 0.6 - pre-release Spry 1.6.1 version * / / * Copyright (c) 2006] Adobe Systems Incorporated. All rights reserved. * / / * Horizontal tabbed panels * the default style for a TabbedPanels widget puts all the tab buttons * (stalled left) above the content panel. * / / * This is the selector for the main container of TabbedPanels. For our * style by default, this container does not contribute anything visually, * but it is floated to the left to ensure that all floating or compensation done * with any which of her children the elements lie entirely within the limits the * TabbedPanels container, in order to minimize any impact or unwanted * interaction with other floating elements on the page which may be used * for page layout. * If you want to limit the width of the widget TabbedPanels, define a * width of the container TabbedPanels. By default, the widget TabbedPanels * extends horizontally to fill the available space. * The name of the class ("TabbedPanels") used in this selector is not * necessary to make the widget service. You can use a class name, you * want to style the TabbedPanels container. */ . TabbedPanels {overflow: hidden;}   margin: 0px;   padding: 0px;   Clear: none;   Width: 100%; / * Hack IE to force the layout correct when preceded by a paragraph. (hasLayout bug) * /} / * this is the selector for the TabGroup. The container of TabGroup houses * all buttons on the tab for each tabs in the widget panel. This container * does not contribute to what both visually in the appearance of the widget for our * default style. * The name of the class ("TabbedPanelsTabGroup") used in this selector is not * necessary to make the widget service. You can use a class name, you * want to style the TabGroup container. */ . TabbedPanelsTabGroup {margin: 0px;}   padding: 0px; } / * This is the selector for the TabbedPanelsTab. This container houses * the title of the Panel. It is also tab 'button' that the user clicks on * to activate the corresponding content panel so that it appears on top * of the other tabs in the widget panels. * For our style by default, each tab is positioned relatively 1 pixel down from * where it would normally. This allows each tab overlap content * panel that renders underneath. Each tab is rendered with a background of 1 pixel * border which has a color that corresponds to the upper edge of the current content * panel. This gives the appearance that the tab is drawn behind the * content panel. * The name of the class ("TabbedPanelsTab") used in this selector is not * necessary to make the widget service. You can use any class name you want * to style the tab container. */ . TabbedPanelsTab {position: relative;}   Top: 1px;   float: left;   padding: 5px 20px;   margin: 0px 1px 0px 0px;   Police: bold 12px without serif.   background-color: #f1c185;   list-style: none;   border-left: 1px solid #CCC;   border-bottom: 1px solid #999;   border-top: 1px solid #999;   border-right: 1px solid #999;   border-radius: 5px 0px 5px 0px;   -moz-user-select: none;   -khtml-user-select: none;   cursor: pointer; } / * This selector is an example how to change the appearance of a button in the tab * container as the mouse enters in the it. The class is "TabbedPanelsTabHover" * programatically add and remove the element tab as the mouse between in * in and out of the container. */ . TabbedPanelsTabHover {background-color: #ffd197 ;} / * this selector is an example how to do to change the appearance of a button in the tab * container after the user has clicked on it to activate a content panel.} * The 'TabbedPanelsTabSelected' class is programmatically added and removed * the tab element as long as the user clicks button tab containers in * the widget. * As mentioned above, for our style by default, the tab buttons are positioned * 1 pixel down where he would normally. What is the tab key * selected, we change its bottom border to match the background color of the * content panel so that it looks like the tab is the content panel. */ . TabbedPanelsTabSelected {background-color: #ffe9cd;}   border-bottom: 1px solid #EEE; } / * This selector is an example of how to make a link inside a tab button * look like normal text. Users may want to use the links within a tab button * so that when it gets the focus, the text * inside * the tab button gets a focus * ring around it, instead of the ring around the whole tab. * /. TabbedPanelsTab a {color: black;}   text-decoration: none; } / * This is the selector for the ContentGroup. The ContentGroup container houses * all panels of content for each tabs in the widget panel. For our * style by default, this container provides the background color and borders that * surround content. * The name of the class ("TabbedPanelsContentGroup") used in this selector is * not necessary to make the widget function. You can use a class name, you * want to style the ContentGroup container. */ . TabbedPanelsContentGroup {clear: both;}   border-top: 1px solid #999;   background-color: #FFF; } / * This is the selector for the content panel. The content panel contains the * content for a single panel tabs. For our default style, this container * provides some padding, so that content is not pushed upward against the * widget borders. * The name of the class ("TabbedPanelsContent") used in this selector is * not necessary to make the widget function. You can use a class name, you * want to style the content container. */ . TabbedPanelsContent {overflow: hidden;}   padding: 4px; } / * This selector is an example of how to change the appearance of the currently * active panel container. The class is "TabbedPanelsContentVisible" * programatically added and removed from the content as the Panel item * is enabled/disabled. */ . TabbedPanelsContentVisible {} / * vertical tabbed panels * following rules override some of the default rules above so that the * TabbedPanels widget is rendered with its buttons on the tab on the left of * the active content panel. * With the rules defined below, the only change that will be made * to move a widget panels to horizontal tabs to vertical tabbed panels * widget, is to use the 'VTabbedPanels' class on the top-level widget * element container, instead of "TabbedPanels. */ . VTabbedPanels {overflow: hidden;}   Zoom: 1; } / * This selector floats the TabGroup so that the tab buttons it contains * make left of active content panel. A border is drawn around * the group container to make it look like a container from the list. */ . VTabbedPanels. TabbedPanelsTabGroup {float: left;}   Width: 10em;   height: 20em;   background-color: #EEE;   position: relative;   border-top: 1px solid #999;   border-right: 1px solid #999;   border-left: 1px solid #CCC;   border-bottom: 1px solid #CCC; } / * This selector disables the float property that is placed on each button of the tab * by the rule above TabbedPanelsTab default selector. He also draws a background * border for the tab. The tab button will get his left and right border of * the TabGroup and its superior border of the tab above it or button TabGroup. */ . VTabbedPanels. TabbedPanelsTab {float: none;}   margin: 0px;   border-top: none;   border-left: none;   border-right: none; } / * This selector disables the float property that is placed on each button of the tab * by the rule above TabbedPanelsTab default selector. He also draws a background * border for the tab. The tab button will get his left and right border of * the TabGroup and its superior border of the tab above it or button TabGroup. */ . VTabbedPanels. TabbedPanelsTabSelected {background-color: #EEE;}   border-bottom: 1px solid #999; } / * This selector fleet contained signs of the widget while they * make it to the right of the tabs buttons. */ . VTabbedPanels. TabbedPanelsContentGroup {clear: none;}   float: left;   padding: 0px;   Width: 30em;   height: 20em; } / * Printing styles * / @media print {.} TabbedPanels {overflow: visible! important;}. TabbedPanelsContentGroup {display: block! important;}   overflow: visible! important;   height: auto! important; } . TabbedPanelsContent {overflow: visible! important;}   display: block! important;   clear: both! important; } . TabbedPanelsTab {overflow: visible! important;}   display: block! important;   clear: both! important; } }

  Add the class like below:

• Open Ocean

Delete the following in your css spry as file its in the ' query print media "and has no effect on the screen - have added you it to the wrong place."

{.alignRight}

position: relative;

Top: 1px;

float: right! important;

padding: 5px 20px;

margin: 0px 1px 0px 0px;

Police: bold 12px without serif.

background-color: #f1c185;

list-style: none;

border-left: 1px solid #CCC;

border-bottom: 1px solid #999;

border-top: 1px solid #999;

border-right: 1px solid #999;

border-radius: 5px 0px 5px 0px;

-moz-user-select: none;

-khtml-user-select: none;

cursor: pointer;

}

Add the below css just above the press query written:

{.alignRight}

float: right! important;

}

/ * Print styles * /.

@media print {}

• How to change the areas of region of report in read-only mode?

  How to change the areas of region of report in read-only mode?
  
  SKUD.

  Add fuction javascript after the page header (or section of function and Javascript variables)

  function disableItems(pRegionStaticId,pDisableFlag) {
    $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
      if( $(this).attr('name').match(/f[0-9][0-9]/) ){
        return $(this);
      }
    }).attr('disabled',pDisableFlag);
  }
  

  pRegionStaticId is static Id + the region

  Note that this code specifically disables only the berries of request. Disabled items are not available after the submission (and are therefore different from readonly). But any javascript page can change disabled or readonly points (client side), so you need to check on the side server to validate the data.

  You can disable items to help

  disableItems ("MY_REGION_ID", true);

  and allow them, by passing false

  disableItems ("MY_REGION_ID", false);

• How to change the url of sites in the new firefox tab page

  If we open newtab in firefox 9 tabs are visible. How to change the url address of the previously pinned tab.

  I found the solution for this problem.

  1. type Subject: config in firefox url and click Enter.

  2. an alert will be displayed when clicking on the button "I'll be careful, I promise!

  3. type browser.newtabpage.pinned in the text box and click on enter.

  4. right click and select the Edit option to change the URL.

  I want to change this URL
  [{"url": "http://localhost: 8080/Admin/login", "title": null},]

  After changing the URL in firefox
  [{"url": "http://localhost: 8080/Admin", "title": "Admin"},]

• Satellite A100-727: how to change the config of media buttons?

  I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

  They are great, but I have no idea how to change the keys.
  I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

  Does one know how I can change the functions of the buttons?
  I read something about the tools of Toshiba, but I can't find them anywere.

  TYVM in advance

  Hello

  Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
  You can also find if you open TOSHIBA help > Optimize.

• How to change the t0 ' topic: host ' search engine

  How to change the t0 ' subject: Home "search engine (for the moment it is yahoo), but I want to google. If I search from the address bar, then it is google. but I want to google on the home page for: (.) Thank you

  @cor-el: this would probably work if you want to restore the default value.

  I have changed my encrypted google search engine on "subject: House" with these steps:

  1. download sqlite browser.
  (I used this: website (sqlitebrowser.sourceforge.net) / victory of direct download)

  2 extract the zip file

  3. run ' SQLite Database Browser 2.0 b1.

  4. open the "chromeappsstore.sqlite" file in your profile folder

  5. click the Browse data tab and double-click the value in the first row. (see screenshot below)

  6. Insert the desired value.

  As you will see the values in the example below, you can use any search you want and you can insert a "_searchTerms_" instead of the term research.
  I have these values:

  • Standart (google):

  {'name': 'Google', "searchUrl" ': "_ http://www.google.com/search?q=_searchTerms & ie = utf - 8 & oe = utf-8 & aq = t & rls = org.mozilla: en - org.mozilla & client = firefox-a" "}

  • Encrypted Google:

  {'name': 'Google', "searchUrl" ': "https://encrypted.google.com/search?q=_searchTerms _" "}

  • Yahoo:

  {'name': 'Yahoo', "searchUrl" ': "http://search.yahoo.com/search?p=_searchTerms _" "}

  • Bing:

  {'name': 'Yahoo', "searchUrl" ': "http://www.bing.com/search?q=_searchTerms _" "}

• On Apple Watch, how to change the time when traveling to a different country, like London or Singapore?

  For Apple Watch, can someone please show me how to change the time on my watch when I travel to another country, like London or Singapore? Thank you.

  Hello

  When traveling to a different time zone, it is not necessary to manually change the time on Apple Watch.

  After turning off the flight on each of your iPhone and Apple Watch, the time on your watch can be updated automatically to reflect the local time.

  If it is not the case, try restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.