How to connect an iPad to a Deskjet Pro 8500 has more

Similar Questions

• I'm trying to connect my new ipad to my officejet pro 8500 has more. not recognized by the ipad.

  message from the iPad: no AirPrint printer found.

  RFE, make sure that bluetooth is off when you try to use airprint. Bluetooth has been called to interfere with AirPrint. Then, download the latest updates from the HP product:

   

• Loss of wireless connection between Mac and Office jet pro 8500 has more

  My printer has been successfully implemented with my mac but loses the wireless connection.

  I'm on OS X Lion (but the same problem happened with Snow Leopard).

  My router is provided by BT Vision.  Also on the original hub is an apple TV and phone 3 handsets.  I don't know what channels to use them and do not know how to find out.

  Network Setup page shows no problem, but the mac cannot connect to the printer.

  Any suggestions please?

  If the printer has a valid IP address (not 0.0.0.0 or 169.254.X.X) then it is always connected to your network.

  If your router is a BT HomeHub, you're not alone.  A lot of people on these forums have had trouble with them and most of them that I couldn't help.

  The only kill-TI-dead solution is to buy a standard router (Linksys or Netgear), attach it to your BT and connect everything to the new router.

• DeskJet pro 8500 has more

  I usually just print in black, but too often it seems that I need to replace 3 color cartridges.  Here are my questions:

  Black print uses these color cartridges, and if not, why should I replace them often?

  When a color cartridge is empty, printer will not print.  How can I change setting just black printing?

  Hello

  You will find information on a thread similar here that could be useful.

• How change the font size on a hp officejet 8500 has more

  I have a hp officejet 8500 has more.  How can I change the size of the font to print full page.  The numbers of police is very low.

  Thank you for your help.

  Kathy {personal info deleted}

  Hey Kathy,.

  I see that you have a problem with the text in small font on printed documents.  You say that this only happens when the navigation and printing from the internet.  What browser do you use?  (Internet Explorer, Chrome, Firefox, etc.)

  Have you tried using another browser?  Normally this problem is the result of a problem of compatibility between the printer driver and the browser program.

  So, you can try using a different printer driver, such as the 990 c driver.  The other pilot should be able to go beyond the question of compatibility and printing back to normal when on the internet.  For more information on how to exchange for a different driver click here.

  Hope this helps,

  Jason

• Ofice jet pro 8500 has more: officejet pro 8500 printing in BLACK when a color is out.how t usually do print in black only?

  8500 will not print in black only when one color is out. How to print in black. I tried to reset the color management to just black but it still won't print. the page is coming from my asus laptop wireless

  The Officejet 8500 has individual inks with separate printheads and "plumbing" to connect.  It requires ink in all colors to keep the plumbing for all air and/or damage the printheads.

  Not the answer you want to hear, but you will need to replace the depleted cartridges.

  The here document contains information on how the ink is used, in the terminology of this page the Officejet 8500 is an IIC printer.

• W7 PC on the router LAN port cannot find connected wireless OJ Pro 8500 has more router suite upgrade

  My broadband provider has replaced my internet router with a new one with dual N band Wireless LAN GigE ports and. The 8500 a printer has been successfully connected WPA Wireless and works very well with a laptop Windows 7 Sony connected wireless and Apple devices.  However neither the desktop PC connected windows 7 Dell LAN or even Sony laptop when it is connected to a router LAN port can find the printer.  I tried to reinstall the printer software with the latest version on the site of HP OJ8500_A910_1315 and the installation fails as auditor of network environment cannot find the printer. I ran the diagnostics of HP network with two firewalls in the PC and router disabled without success. The LAN itself seems to work OK as the PC can meet, Exchange files and and can access the internet.  The router has been checked by the technical uupport of the broadband service provider.  The printer is visible as a network connected device in Windows Explorer so you expect the HP software to see. The only option to set the printers IP address and use it in the installion process or is there other settings that I can change to get the HP network environment checker works correctly?  Thoughts would be appreciated.

  Thank you very much.  Unfortunately the router (a BT HomeHub4) does not have such a context, in the hub Manager, which is accessible by the user but I have now found it has the ability to set the IP address of a wireless device if I did. I reinstalled successfully on the printer to all computers.

• HP Officejet Pro 8500 has more: How do I scan multiple pages into a single document

  This product, print and scan without problem, but I could not scan multiple pages in the same document.  I have to analyze each page separately, and it wastes a lot of time.  Please advise!

  Hello

  Please try

  Double-click the icon of the printer on the desktop,
  Select scan a Document or Photo,
  The first page on the glass (face-down)
  Check out the options (size, dpi...) and select scan the document to be filed,.
  Click on Scan - machine will scan the first page
  Delete the first page on the glass, put the second page,
  Click on + (plus sign) it is located on the left side of a red x
  Machine will sweep the second page, put 3rd page on the glass and click on + again... until the end and then click Save
  Click done after save

  Kind regards.

• How to download pictures from a memory card to the computer on the new Officejet 8500 has more?

  I recently replaced an old printer HP psc 2410 photosmart with a new Officejet Pro 8500 has more printer.  The installation went fine without error messages, and it will print, scan and copy very well.  When I insert a memory card into the slot, the printer itself recognizes files and displays them on the LCD screen and offers to print.  BUT... what I want to do is to download the files on my PC (Windows XP), and I can't understand how do!  There is no program of HP that appears and offers to transfer the photos as with my old printer.   I also expected to see the map locations shown as a removable disk, as I did with my old printer, but I don't see them.  In addition, my Photoshop Elements program does not recognize the card slots to be.

  Then it dawned on me that my computer 'sees' map locations because it is not connected directly to the printer!  I created this as a wireless printer and I am totally new to this, so sorry if this is a stupid question... but there no way to transfer files from the PC card slot in a wireless configuration?  I'm totally confused...

  Hello

  If your printer is connected to the network or wireless network, you must access it through the IP address.

  Find the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.

  Open Windows explore and type \\xxx.xxx.xxx.xxx"where xxx.xxx.xxx.xxx is the ip address of the printer.

  You will see the memory card slot there.

  You can do a "map network drive" to it if you want your printer card slot to be registered permanently.

• HP OfficeJet 8500 has more 910 g give up connection every now and then

  I explored the forums for 8500 more connectivity issues and did the following, but the problem persists:

  I am using the Wi - Fi connection (force 4), web update services and software packages, can use eprint, but printer loses connection (even with eprint servers). I have it set to fax so phone line is connected and noticed that when a call arrives (or goes), it restores the network connection. It seems that he loses the connection when it starts in mode 'sleep'. Is there a way to disable, and then do a test?

  I noticed that first print wirelessly from a laptop computer crashes and comes back with an error (sometimes work after a long time), but the second try and then work (it seems that the first test is trying to put the printer back to the mode 'sleep'!)

  I have the static IP assigned (in both the printer and the router) and static DNS primary.

  I have IP v4 ONLY on the printer.

  What can be done? Help, please. The printer is only a few days old!

  I finally realized that you can go to the 'Préférences' menu on the touch screen and disable the "power saving Mode" - this apperently solved the "problem of loss of connection" (with static IP/DNS and IP v4 only)- but the screen was continually WE (and quite brilliant - more than a lamp at night!). I also found that there is an option under "Tools" screen saver But the screensaver works just the video "promo" continuously without interruption and with the same brightness on the screen. Is it possible to say 'black' after 10 minutes?

  Perhaps HP should provide a screen saver that turns off the display after a period of inactivity.

  APPARENTLY, THE LOSS OF CONNECTION BUG IS DUE TO "ENTERGY SAVE MODE" WHERE THE WIRELESS LAN CANNOT DETECT TRAFFIC TO WAKE UP THE PRINTER. THIS SHOULD ALSO BE FIXED IN THE NEXT FIRMWARE.

  To SUMMARIZE: In order to avoid the 'loss of connection"(for wireless) perform the following steps:

  1 assign a static primary DNS and static IP address (through EWS doing via a browser is easier - see below on access EWS).

  2. optional but recommended: connect the printer wireless MAC address to the same static IP address in the configuration of the router (router consult manual or vendor on how to do this).

  3. via the integrated Web server accessed through a browser of computer - under 'Network' settings, select 'IP v4 ONLY' (EWS is accessed through a browser on the same wireless LAN by typing http://192.168.1.xxx - where xxx is the IP address assigned statically - you can find it via touching the wireless icon on the screen in the printer)

  4. go in the 'preferences' and disable the "power saving Mode" (in the touch screen of the printer interface)

  5. optional but highly recommended: turn on the "screen saver" in the "Tools" menu (in the touch screen of the printer interface)

  6 see if it the problem slves (mine is running fine since then)

  These steps are for HP Office Jet 8500 has more 910 g printer. I hope it helps someone here!

• Impossible to get HP pro 8500 has to connect to the internet.

  How can I get HP pro 8500 has to connect to the internet.  When I go through when I go to the e hp Print cebter I see a yellow warning box indicating that my printer is not connected to the internet.

  Inernet connection has been established and shown on eprint center once the printer was turned off and then back on again.

• HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

  I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

  "You can connect to the server through a proxy server" what is a proxy server address

  Hi @Raggetty ,

  I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

  Since you have moved, you must install the printer on the network.

  If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

  Then set up the printer on the network again.

  Follow this document:

  Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

  If you need help to set up the printer on the network, let me know.

  Good day!
  Thank you.

• Beep - HP DeskJet Pro 8500

  My DeskJet Pro 8500 8500 new makes a beep sound when it goes into the energy saving mode.

  The power button is flashing and beeping starts.

  Is this normal and is it possible to stop beeping?

  Thank you

  You are ABSOLUTELY sure that the beep comes from the printer and not any other device?

• HOW TO CONNECT THE OVERHEAD PROJECTOR FOR MACBOOK PRO

  How to connect a general cool projector for the macbook pro laptop?

  You need to know the format of output of the projector or VGA or something else

  You can get a connector like this

  (1190)

• How can I find unused since my Officejet Pro 8500 ink cartridges?

  My Officejet Pro 8500 had a leak of ink all over the floor and my office yesterday morning when I first turned on.  When I opened the top to check the printheads, I discovered all ink inside the printer.  I think we just need recycling.  My problem: I have 5 UN-opened of HP #940 ink cartridges.  I would return to HP and get the replacement cartridges for our different printer, but do not have how to find out if this is possible.

  Hello @JoAnne2015!

  Thanks for posting on the HP Forums!

  Sorry to hear about the leakage of ink in your printer.  To do any kind of exchange of ink with HP I recommend to contact our hotline.  Please follow this link www.hp.com/contacthp/ enter your product number, select your product, scroll down and fill out the form. Will then give you a case number and a phone number / reference to give the agent who answers your phone call.

  Thanks again for posting on the HP Forums and have a great day!