How to connect my HP c410a printer to my I Pad2, in order to print with my I - Pad? My printer is wireless

Similar Questions

• Can I connect a link more MXI for PXI-1033 card in order to work with it

  Ladies and gentlemen,

  Tell me please that I can plug a card of MXI link more in the PXI-1033 chassis in order to work with it.

  In other words, I don't use the built-in controller for MXI and want to work with the NI PXI-8366 MXI-Express and PXI-1033.

  Thank you.

  The answer to your question is no. The question that must be taken into consideration is the type of housing, we have access to on the PXI-1033. To use a PXI MXI card for control purposes in a PXI system, we need to use the card in a slot of system controller (denoted by a triangle around the number of slots on the chassis). With the 1033 however, we have no access to slots control. Because of the connection of controller MXI incorporated, we only have access to a calendar/trigger and devices slots.

  Is there a particular reason you don't want to use on the 1033 MXI connection, or you just want to avoid having to change the connection to another computer?  Single MXI cards which would depend on the space available on the PXI-1033 would be something along the lines of the 8367 and 8367, who are used to the Garland of a separate chassis.

• HP PHOTOSMART 7520E: HOW TO CONNECT THE 75 HP PRINTER TO THE COMPUTER AND THE ROUTER

  Here's my problem.  My modem from my ISP did not work properly and they brought a new modem and set up.  It is obviously not properly configured, and when I go on the computer I have to use the arrow in the lower right of my computer to connect to the Internet.  I also connect my printer using this same low right arrow.  My Internet provider tried to fix this error on the phone but IT does IS NOT WORKING CORRECTLY.  I call today for an appointment for a tech to come to my house to fix this.  That's why I can't take back my electronic impressions with crossword games, etc., until it is properly fixed.  I would ask BEFORE the tech comes to my home to BRING A MODEM it IS WORKING CORRECTLY.  When I spoke this morning with my Internet provider, I learned that there are other people in my neighborhood by using the same network, that's why I'm having this problem.  I TOLD THEM THAT I DO NOT ACCEPT THIS BECAUSE ALL THESE PROBLEMS HAVE OCCURRED AFTER THEY HAVE INSTALLED THIS OBVIOUSLY DEFECTIVE MODEM.  I HAVE THEM ALSO SAID SINCE I WAS 'SHARING' A MODEM WITH MY NEIGHBORS, I'LL ASK FOR A DISCOUNT ON MY SERVICE AND OF COURSE, THAT HAS NOT RECEIVED POSITIVELY.   I'll post an update when this problem is solved by my Internet provider.

  Hi @filgrastin,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to connect your printer wireless due to a problem with your modem. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Once the problem has been resolved with the modem and your computer is correctly connected to the internet, I'd be happy to help you with the installation of the printer if you still need help.

  If you need assistance, please let me know. Good luck!

• Satellite A200: How to connect a parallel port printer?

  Probably a very stupid question, but I would like to connect laptop series A200 on a parallel port printer that does not have a USB port... What is the best option?

  Hello

  You ask the best way?
  Well, you have only one way?

  You need an adapter USB to parallel. Check in google for certain offers.
  I searched in google and found some good options.

  Perhaps this might be a good choice;
  http://www.ramelectronics.NET/HTML/usb_printer_cable.htm#UP6C

  Best regards

• How to connect my old HP printer on my new laptop

  I have a HP LaserJet 1100 printer, and I want to connect it on my laptop satellite. I can´t find witch cable to use, if any?

  Hello

  I guess your printer takes only supported a parallel port and uses the parallel cable, but you do not find these ports on the Satellite. Am I wrong?

  Well, my old printer DeskJet 840C uses the same cable that your and I had the same problem with my newest Satellite phone. My old laptop supports the parallel port.

  However, I just bought a USB-> parallel port adapter and it works. But I recommend to test the adapter first because not all working correctly.

• How to connect hPa photo smart printer while a C4385 on I pad

  I'm trying to connect to Apple IPad Wifi 16 GB white for my HP C4385 photo smart printer but all I get is I printer is not found. Can anyone help please.

  Hello

  Your printer is only USB connection, does not supports AirPrint and other mobile printing tasks:

  http://support.HP.com/us-en/product/HP-Photosmart-C4300-all-in-one-printer-series/3221640/model/3221645/document/c01122227/

  This is why your iPhone won't be able to find it. You need an AirPrint, ePrint or printer of cloud which can be connected to a wireless network to be able to print from mobile devices.

  Kind regards.

• How to connect my ALTEC for printer HP4620

  Hello

  Is there someone out there who might be able to help with my HP Altec on our printer HP 4620 conecting it please.

  Ray

  Hello @royjohn and welcome to the Forums of HP, I hope you enjoy your experience!

  see what you are looking for in your printer connection.

  I'd like to help, but I have a few questions first:

  • What version of Windows are you using?
  • Using 32-bit or 64-bit?
  • You connect via a wireless connection or a USB connection?

  I'm including a couple of documents on the search of your operating system information:

  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Good luck and please let me know the results of your analyses. Thanks again for the display on the HP Forums!

• How to connect my ipad on printer HP 6520

  I would like to know how do I print from my Ipad Air using my printer HP-6520.

  Hi Molly,

  Exactly how you print depends on what kind of situation you have.

  Read what follows:

  HP ePrint Mobile App FAQ

  How to print with an iPad, iPhone or iPod touch

  AirPrint allows instant printing of iPad, iPhone, iPod touch and Mac

  List of printers and the instructions in the following link:

  AirPrint compatible printers

  =========================================================================================

  Your printer is capable of printing.

  Driver page: e-all-in-one printer, HP Photosmart 6520 drivers

  Select the Troubleshooting tab > how > use ePrint and mobile devices

   

   

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• How to connect my hp deskjet printer 3052 has my router

  I recently changed my modem and now I can not connect my printer any more. I have a Thomson TG585V7 modem. My printer is a HP Deskjet 3052 a. I don't know what I have to do. I tried to connect the printer through its Setup program and press the WPS three seconds and it has expired. If you would like more information, just let me know

  Hello

  Go here...

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=5061073

  Download the manuals and full of drivers and software and follow the instructions to set up the printer.

• How to connect additional computers to print with my HP 4500 wireless all-in-one new?

  Hello, I managed to install my new 4500 all-in-one wireless print with my HP TouchSmart 520 desktop computer.  However, now that he's put in place, how do I tell my other laptops and netbooks to print to it?  It should not now appear in the list of printers for these computers?

  Printers will not automatically appear (on a WIndows computer), you should add them.

  This should help: https://h20563.www2.hp.com/p/_wireless/reconfiguring-system-help.html

• How you connect the Deskjet 2050 printer to a computer? What leads?

  Seems not to be a lead included in the configuration for deskjet 2050A box, only a prinbter-food, not a USB port to sync with the laptop, what lead would need to buy? Please help x

  Hello

  Based on this record, he has only the standard USB connection:

  HP ePrint ability	NO.
  WiFi functionality	NO.
  Connectivity, standard	1 hi-Speed USB 2.0

  All you need is a normal standard USB cable like this:

  http://www.google.com.au/products/catalog?q=usb+cable&hl=en&rlz=1G1GGLQ_ENAU282&prmd=imvns&biw=1920&bih=986&um=1&ie=UTF-8&tbm=shop&cid=14024077703155464070&sa=X&ei=PVwUUP29JKi1iQegnoCYCg&ved=0CKYBEPMCMAY

  Kind regards.

• How to connect to my new printer wireless without the disc? It comes out of the box.

  I have a cell phone, and what I use now is the Samsung Galaxy 10.1 tablet...

  Hello.

  If the CD is not available, the device drivers can be downloaded from our Web site.

  Please visit the following link to access the downloads:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#D...

• DeskJet 4645: New printer connected but do not print (without wireless or USB)

  Hi, I recently bought an HP deskjet printer advanced 4645... I had an old Officejet... So, I just installed with the new printer, everything connected and implemented. It is on the wireless network and communicates properly with the Internet. It fits on my computer and watch when it is offline or online and I can view on computer ink levels, so he communicates with her (same model scanning worked...). The ePrint (by e-mail) works and AirPrinting of an iPad in the works...

  BUT it won't print from the computer... Not at all... I reinstalled the program several times (app HP doctor suggested this), I swapped the printer where I bought it thinking it was a dud, I tried to connect via the USB cable... Nothing... Help, please

  Hi, I installed the driver full and tried everything... I ended up buying an officejet thinking that it was the deskjet sends me problems...
  
  BUT it still does not... I then found a place where you uninstall drivers conpletely (not in the Panel @ devices...)
  
  It is in devices and printers (Panel)
  Select a printer and then on the top of the page, click the tab saying "Server Properties".
  Then select the driver you want to uninstall
  Click on delete
  And TADA

• Connect wired PC to printer on wireless LAN

  I would like to connect my PC running Windows XP on my Pixma MX452 printer through my local network. The PC is connected via a wired connection to the same router to which the MX452 is connected wireless. Both connections are fine. I can print wireless from other devices on the wireless network. I can also connect to the Configuration application to the network printer to the PC through a web browser by entering the IP address of the printer, but I can't find it in the process of "Add a printer" Windows XP. Is it still possible?

  Hi CanonUser1971,

  You can install the drivers for the printer from the Web of Canon USA site on your Windows XP computer to connect your PIXMA MX452.  When you install the drivers, make sure that any antivirus firewall software that is on your computer is temporarily disabled, because these programs can sometimes block the printer detected on the network. Once the printer is detected successfully, the software protection can be reactivated.

  Please click here to access the drivers and software page for the PIXMA MX452. Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "RECOMMENDED DOWNLOADS" section and click on the MINI MASTER CONFIGURATION file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the Mini Master configuration file, double-click the file and follow the prompts to install the printer on your computer.

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• How to connect to an ip camera?

  Hello people,

  I develop a Train RC to monitor an accelerator of electrons, with an IP camera to stream video to the host PC (since it is a prototype, I bought a generic camera). I read a lot about how to acquire video of these cameras, and it seems to me that the best way to acquire these images is to use an active X control, but since this is the first time that I work with CompacRIO and Labview, I don't know how to open communication with the camera. I think I do as 'TCP connection open', but I cannot understand how to connect its use. I'm probably going to send two channels, one with the login, and the other with the password. Does anyone know how to do?

  After that, how can I send the video to the activex control? Maybe I should use the block open Automation and nodes of property/Invoke, is - that correct?

  I have the camera recorded on windows library, so I can see and select from Labview. By default, the camera uses port 80 to communicate with the PC.

  If you would like more information to help, just tell me and I'll post.

  Kind regards

  Vitor

  In fact, I already solved this problem. This camera is a fake Foscam, so I do not know the manufacturer (probably Chinese). Anyway, this ip cam has an .ocx library, and what I did was to call using activex and used an invoke node where I found a function of connection. Now I can acquire video from the camera using labview.

  Thanks for your concern!