How to connect satellite P200 - 1 8 to a 40 "LCD TV

Similar Questions

• Re: How to reset Satellite P200 - updated 1FC to upgrade to 7

  Hello

  Is it possible to reset my Satellite P200 - 1FC supplied with Vista, with the product recovery disc if I upgraded to windows 7?

  The problem is incredibly slow internet connection where the other cell phones all work very well - is this likely to help in any way?

  Thank you very much

  Yes, it is possible. Before the installation of recovery begins will be formatted the whole HARD drive and recovery image installed. No problem at all.

• How to connect satellite Pro L40-15 has to my TV?

  Hello

  I would use the laptop connected to my TV to watch movies. Can be connected using the TV as a monitor and what kind of cable would you use?

  Thank you
  Malc

  To connect the laptop to the TV is very easy. If you look at the user s manuals document you will find exact explanation how proceed.

  If I remember well your laptop should have S-Video output and video signal transfer port, you must use S-video cable. I hope your TV's S-Video IN port. If this isn't the case, you can use different cards.

  Please check this thread and read carefully reading written by Miro. He explained very detailed how to connect the laptop to the TV.

  If you have any other questions please post again.

• Re: How to reset Satellite P200-12V in factory State?

  Hello

  I need help to reset my computer (Satellite P200-12V) in factory State.

  After turning on my computer, I get "blue screens of death" after a few minutes.
  I tried to download the drivers, where it was due to a bad, but the problem remains.
  The only solution that I can choose is therefore now put in shape the HD and restore the original soft Toshiba and OS (Vista), that is, from what I know, in a hidden partition.

  I tried F8 but I have in the dropdown menu, I don t get no option for this (I wonder just to use my system CD, and of course, I have not...).

  Is there one plan other than the F8?
  Please, what can I do now?

  Thanks for your help
  Mike

  Hello Mike

  Some old notebooks as your P200 were shipped with and some without recovery DVDs. notebooks shipped without DVD recovery media had saved from a recovery image on the second partition of HARD drive in the folder called HDDRecovery was not a hidden partition. It was visible in Windows Explorer.

  If your laptop has been delivered without DVD you had the ability to create this disc using Toshiba recovery disc creator pre-installed recovery. I assume that you didn't create, right?

  If you can't see the option repair my computer start-up advanced options (F8 at startup) that there is no way to launch the installation of HARD drive recovery.
  > Is there any procedure except F8?
  Yes. Use of DVD recovery, but of course you don t have it.

  Is it possible that you get the original installation disc for Microsoft?

• How to connect Satellite M55 to my LCD TV?

  I have a M - 55 Satellite and want to connect it to my TV LCD 20'. I bought a VGA cord and hung it at once, but nothing is really happening. It appears on the TV when I'm starting MSFT XP so that s it.

  My laptop is on a 1 year old. Do I need a special video card? I have been to display, settings and made the appropriate changes, but still nothings... I need your wisdom.

  Kind regards

  Nick

  Hello

  What graphics card you have on board? You have done the installation, you are your VGA output of your LCD screen correctly in your display properties? Maybe that is the solution just in the correct settings of your VGA card.
  A good way is to update the graphics drivers to the latest version.

  Greetings

• How to connect satellite decoder for Qosmio G50 using cable RCA video in

  I want to connect my satellite receiver to my laptop Qosmio G50 using the video RCA cable I got with the computer. (yellow, red, white RCA and one Jack)

  Could you help me where should I plug this cable that I have not found all the instructions in the user manual. (User manual list this cable on page 21, so it can be used for something somehow for sure!)

  (The decoder doesn't have a coaxial output, and I don't want to put another machine (eg. an old VCR) just to use a coaxial connection.)

  Thank you in advance for your help!
  Sandor.

  Hi mate

  I found your other thread on this topic and it seems that you have answered yourself.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44724

  Thanks for that!

• Tecra M2: How to connect on port DVI - D LCD with DVI - I and at 1600 x 1200

  My Toshiba Tecra M2 has a GeForce FX go5200. Docking station has a DVI - D port.

  I want to use an external LCD screen which is equipped with a DVI - I port.

  When you connect a DVI - D cable to the DVI - D between the ports and monitor Replicator and if I set to 1600 x 1200 which is desired (and support for the resolution of the screen) then the display does not fit in the liquid crystal display and therefore the screen starts to pan.

  If I use a (next to the PC) VGA / DVI - I (next to the screen) cable then I wanted resolution of 1600 x 1200.

  Please advise so how:

  Connect the Port DVI - D from Toshiba to LCD with DVI - I and at 1600 x 1200.

  Help, please...

  Hello

  I agree with Tom.
  I visited the Toshiba knowledge base and found this FAQ:

  Max. Resolution DVI - D on Advanced Port Replikator II III & Tecra M1 and M2
  http://support.toshiba-tro.de/KB0/TSB4900S10001R01.htm

  PS: This database is really useful. I found very interesting material. Everyone should use it.

• Satellite P200 will not connect to wireless internet

  I have a Toshiba Satellite P200-143.
  I changed my internet provider, but the Toshiba will connect to the internet only when the blue ethernet cable is connected.

  Yet my laptop marry connects easily.
  I'll start, connect to identify the wireless network and tap on connect, it tries, but says connect with limited access.

  Any ideas plse.

  Hello

  (1) have you activated the WLan card?
  To activate the Wlan you must pass the antenna WLan switch on IT (LED should Flash) and you must use the FN + F8 key.

  (2) did you check the WLan configuration?
  -SID, right encryption settings, good filtering by MAC address, good TCP/IP settings on the right

  (3) have you tried to update the driver WLan?

  (4) don't you update the BIOS?

  If this is not the case, check this box!

• Satellite P15: How to connect the TV antenna?

  I bought Toshiba Satellite P15 S479with XP MCE, with tips and Tv tuner, and I do not know how to connect my Tv antenna, so I could watch and record tv on my computer. My picture quality is poor, I see tones with lots of "snow".
  What should I do?

  Hello
  As far as I know it must be an American model. Do you use it in the United States or Europe? If you use in Europe is another TV standard (PAL).

• How to recover only drive C on a Satellite P200-1FJ

  Hi, I have a Satellite P200-1FJ and I want to recover Vista but only on my first partition.
  My HARD drive is divided into 3 partitions and I don't want to loose data. How can I retrieve the C partition only using the recovery CD of the product came with my laptop?

  Unfortunately, this is not possible using the Toshiba Vista recovery CD!

  The recovery CD would delete all partitions on the HARD drive!

• Satellite 1135-S1553 without S-Video output Port - how to connect a TV

  I have a portable Satellite 1135-S1553, how to connect it to the TV without having the S-video output Port in my laptop?

  Are you sure that your computer laptop doesn t support port s-video OUTPUT to 100%?
  According to [this page | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_tourView.jsp?moid=434998&rpn=PS113U&ct=PT&so id = 660059] portable Saturday 1153-S1553 supports this port at the rear.

• Satellite M40X-189: how to connect RGB port to port RS232?

  Hello
  as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
  I work with device of automatic titration requiring the RS232 port for connection!
  No idea how I can connect my laptop on this unit!

  pls help
  Thank you
  Omrankl

  Hello

  AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
  But I found the site useful:
  http://www.Ontrak.NET/USB.htm

  You will find a description how to connect the USB port to an RS-232 port.
  You need an interface ADU.
  Click on the link.

• Satellite P200 - failed to connect to the Windows Services

  After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
  Use restricted to the mode of administration.

  No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
  Unable to retrieve a previous saved file system.

  I need to restore my Toshiba restore disk Win Vista?

  Do you offer a lighter solution?

  It's strange, but what you mean with batch mode?
  You can start in safe mode?

  I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

• Satellite P200 - unable to connect to the WLAN router

  I have a Satellite P200 and that you have upgraded from Vista to Windows 7.

  The wireless is working and to see available networks, but trying to connect it does not ask the WEP key, it just says: he has a connection problem and (possibly) says that it cannot connect.

  Someone at - it clues on this?

  Thank you.

  Hello!

  It's really strange Mavourneen. I also have Windows 7 on my Toshiba laptop, but I put t have problems to connect to my router WLAN. Everything works fine on it.

  Can I ask you if you tried to update the driver WLAN? You can download the latest version here:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tried to update the BIOS?

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.