How to connect to four Mirage servers via alternating of Mirage gateway on an external?

Similar Questions

• Re: How to connect to the mobile phone via the com port

  Hello
  I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

  Hello

  Satellite A300 Vista preinstalled
  Battery Bluetooth version 6.10.07
  Motorola Razor V3 mobile phone

  Not the same mobile phone, but the principle is the same.
  Without doing anything special, I connected my phone to the laptop in a minute.

  Allow BT using FN + F8
  Open Bluetooth settings, click the BT symbol in the taskbar
  Click on new connection
  Select the Express Mode > mode activate Visible on laptop > click OK
  On the new connection wizard, choose phone list and click OK
  When offered choose security PIN (for example, 1234)
  Check connection on mobile phone and enter PIN security
  After the PIN CPM40 control port will be enabled

  Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

  By the way: what model of laptop do you have and which version of battery Bluetooth?

• How to connect to VMware VSphere Hypervisor via the internet

  Hello

  I'll set up a server with VMware Vsphere Hypervisor and want to connect to the server via Internet, so not in my local network. If it can, what are the ports I need to open to you connect to the server somewhere else? And if I open this ports can I just connect to the server using my external IP, or what I have to configure something?

  Welcome to the community.

  First open it.

  The ICMP opened between the source and destination. If there is a communication.

  They then treat access esxi.

  Port 443 for vsphere client connection esxi.

  902 port to access the virtual machine console

  port 22 for esxi PuTTY access.

  see the link to the source for more information below.

  http://KB.VMware.com/kb/1012382

  Allocation of points for the useful and helpful responses by clicking on the sub tab

• How to connect a MAC via RDP machine

  How to connect a MAC via RDP machine from a Windows machine.

  Hello

  I found the solution, you can use VNC viewer to access MAC machine to Windows.

  Steps to activate allow the connection to the MAC

  Go to the system preferences - click Sharing - select Remote management, click Computer Configuration

  Check these two options

  -Any person may request permission to control system

  -VNC viewers may control screen with password (enter password)

  Now the system of windows one can connect using MAC machine IP and the password

  Kind regards

  Durga

• How to connect a laptop to a TV via S-Video?

  I try to connect my Toshiba laptop (A300 / 1 G 0) to a 32 "Sony TV (KDL-EX403) via S-video to SCART, but nothing happens. I connect it all that but the TV does not recognize the laptop and the laptop does not recognize the TV. I updated my graphics driver and checked all the display settings that I can find but still nothing!

  By the way my graphics card: Mobile Intel 965 Express Chipset Family

  WHAT CAN I DO? HELP WOULD BE GREATLY APPRECIATED!

  I try to connect my Toshiba laptop (A300 / 1 G 0) to a 32 "Sony TV (KDL-EX403) via S-video to SCART, but nothing happens. I connect it all that but the TV does not recognize the laptop and the laptop does not recognize the TV. I updated my graphics driver and checked all the display settings that I can find but still nothing!

  By the way my graphics card: Mobile Intel 965 Express Chipset Family

  WHAT CAN I DO? HELP WOULD BE GREATLY APPRECIATED!

  =======================================
  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  Company information
  http://www.SVIDEO.com/info.html J of volunteer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• BlackBerry smartphone how to connect PC to internet via BB? + Some app that measures minutes of phone calls and sms?

  Hello

  I have 2 questions. How to connect PC to internet via BB? Is an app that measures minutes of phone calls and sms?

  And one not so important question: what games and app that you most like and use, which are the best?

  Thank you very much for you reply

  Follow these steps to use as a modem attached

  http://www.BlackBerry.com/BTSC/KB05196

  When you get to the part where you enter the APN settings of the carrier that you will find on this site

  http://www.BlackBerryFAQ.com/index.php/Carrier_specific_APN/TCP_settings

  Here's an application that measures the information you speak

  http://www.BerryReview.com/2009/07/20/David-a-cheap-wireless-data-SMS-minutes-usage-monitoring/

  I use Facebook, Google Talk, Google Sync, Pandora, Gokivo Navigator a lot

• How to connect the servers of the clients

  Hi Experts,
  
  We have database servers and servers obiee are found in the Linux machine. I installed obiee11.1.1.6.0 Client on my machine locala.
  But my goal is I want to create a new repository. How to connect servers to the local machine, so can someone give me the total steps to connect servers and data import.
  
  
  Kind regards
  My

  Hello.
  follow these steps
  1.) get it the host name and the ip address of the server database and put in the file host localhost of the system located in the drivers/etc/hosts

  (2) turn once the details in the host of the local machine file, then test the ip address using the cmd prompt.

  (3) install the customer database in your local computer and in the file tnsnames.ora network/admin folder is there in this folder you need to update details of dabase server that is installed in the Linux machine.

  (4) then open the client and create a new RPD by selecting the type of connection as OIC 10 g / 11 G
  and enter the DNS of the database server that is located in the tnsnames.ora file and provide the schema of database user name and password to import files to build the RPD.

  hope this helps

• How to connect two databases on two servers

  How to connect two databases on two servers. For example
  a serevr is in India and another in Australia.
  The following example is correct or not
  
  Select A.ID, B.Name [10.50.17.87] .HR. EMP A, [192.168.100.125] .HR. TRANS B
  Where A.ID = B.ID

  You must use a database for this link. The syntax is defined in the reference SQL here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_5005.htm#SQLRF01205

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• How to connect my Samsung wave with my laptop via wifi?

  original title: wifi connection

  HOW TO CONNECT MY SAMSUNG WAVE 525 WITH MY DELL INSPIRON 1525 BY WIFI

  Hello

  I suggest you follow the links below and the Coachman

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You try to connect the phone directly on the system or through a router?

  You will not be able to connect the cellphone to the PC directly,

  See the explanation: http://www.samsungwaveforum.com/samsung-wave-troubleshooting/connecting-wave-to-pc-through-wifi/

• How to connect two computers via HDMI cable?

  Hello

  I need to connect my computer by another via HDMI cable to share files.

  1. are there available for this software?

  2. can I connect a Windows PC with Macbook via HDMI?

  HDMI for the video output, not to transfer files...

  See here for transfer files between a PC and a Mac.

  http://support.Apple.com/en-us/HT1408

• How to connect my Windows 7 PC to Internet via Bluetooth on my Windows Mobile 6.1 phone?

  I have problems connecting to the Internet on my laptop under that Windows 7, Bluetooth, plugged in on my mobile phone running Windows Mobile 6.1.

  The phone is a Samsung Omnia GT-B7610 and can access the Internet via 3G.

  I can pair the phone with Windows 7 via Bluetooth without problem, but I cannot yet access the Internet on the PC.  The process I use is:

  -Pairing phone and your PC by selecting devices and printers > add a device, etc., etc.  The device is successfully added.
  -Network and Sharing Center > set up a new connection or network > connect to Internet > set up a new connection anyway > Dial-up.  It is supposed to be a Bluetooth option on this screen, but I did not.

  When I do this:
  Devices and printers > right click on the paired Bluetooth device > properties > Services tab, I see that Active Sync Bluetooth Service as the only service available.  Is this correct?

  In addition, I can't get Windows Mobile Device Center to connect/sync to the phone via Bluetooth.

  Any help is very appreciated!

  Hi Kiti, thanks for the reply.  I had just a little work there is, however I came across a program that makes it much easier: WMWifiRouter.  I highly recommend it!

• M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

  Any help is appreciated.

  This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

  I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

  I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

  Any help is trully appreciated.  Thank you.

  Hello

  The Jetdirect 3000w feature:

  http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

  It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

  http://support.HP.com/us-en/document/c04762612

  Kind regards.

• How to connect to iSCSI SAN without compromising security

  Hello:

  How to enable server OSes (VMS or physical host computers) to connect and LUN iSCSI mount without compromising the safety of our ESX host?  We have a few Microsoft servers that need to use iSCSI initiators at Mount MON for MSCS.   We cannot use the ESX initiators because VMware doesn't support iSCSI to virtual storage with MSCS.  We have already read all the documentation and spoke with VMware support, so we know that our only option is to use the iSCSI initiators in Microsoft servers to connect to the LUN.

  Our concern is security.  If we let the servers use their iSCSI initiators to connect to the San, then they also won't have access to our service and the vkernels via the iSCSI network console?  ESX requires that you have a port the service console and the port of vkernel on the iSCSI network for each ESX box that you want to use the ESX initiator for.  We struggle to understand how to connect any machine (virtual or physical) to the iSCSI network to mount LUN without exposing our service and vkernels consoles.  I know that the best practice is to remove this VMs network for this exact reason, but of course many organizations also have physical servers (UNIX, Windows) who need to access their iSCSI SAN.  How people treat this?  How much of a security problem is it?  Is there a way to secure the service console and vkernel ports while allowing host ESX - no access to the SAN?  I know that many of you are facing this exact in your organizations situation, please help.  Obviously, it is not supposed that nobody uses their SAN iSCSI for anything else except for the ESX host.  I thank very you much.

  James

  Hello

  Check out this blog

  Use of firewall is certainly a step in the right direction for that. If you can't have separate iSCSI networks, then you will need to isolate nodes NON-ESX/VCB iSCSI using other mechanisms. I would certainly opt for firewalls or reduce the redundancy to just 2 network-by-network cards and not 4 to a single network.

  Someone at - it any other suggestions? Surely many ESX users share their iSCSI SAN with a lot of different systems and operating systems. Thanks again.

  They do, but they do not secure their networks for their VMs ESX iSCSI / other physical systems. You have asked a very important question and it's how to connect to iSCSI SAN without compromising safety. If the options are currently:

  1. Physically isolate

  2. Isolate using firewall

  Given that ESX speaks in clear text and does not support IPsec for iSCSI, you have very limited options that are available to you. The firewall you use and charge iSCSI, you send through it will determine if there is no latency. Yes its a cost extra, but if it is an independent network switches/ports/etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast