How to connect to the internet using the modem from verizon

Similar Questions

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Re-establish the connection to the router from Verizon Wireless

  I use IE6 on a portable Toshiiba with Windows XP. Our internet connection is via a Verizon Wireless router. Today, I can't run (Firefox or IE, by the way) - it does not detect the router. I am still able to connect to this router and internet through my MacBook Pro. How do I reconnect?

  Thank you.

  Hello

  1. What is the model of the router?

  2. you get any error message?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/870702

  Method 2:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  Follow the steps from the links below.

  http://www22.Verizon.com/support/residential/Internet/fiosinternet/networking/setup/vzmi424/120519.htm#

  http://www22.Verizon.com/support/residential/Internet/fiosinternet/networking/setup/vzmi424/120527.htm

  See also the below mentioned link.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• How can I download the drivers from Manufacter ' ' s Website if I have no internet.»

  original title: How can I download the drivers from Manufacter ' ' s Website so I havew no internet. ". Computer a wipe trying to download Microsoft XP! Now I can't access the internet.

  How can I download driver manufactuer website if I have no internet service?  Computer was wiped out trying to download Miccrosoft XP.  Now I can't access the internet.

  Hello

  In the case of no internet access, I suggest to download the driver on another computer that has internet access and save it. Later, you can use any flash drive or you can also burn it to a CD for transfer files downloaded to your computer and install the driver file.

  In order to bypass without network problem, follow the link below and check if this can help:

  http://support.Microsoft.com/kb/307164

  http://support.Microsoft.com/kb/314095

• Router is not connecting to the modem so I can't get internet

  All right-_ - I tried a lot of things with this so I get irritated sorry. Here is my info I have a Linksys Wireless Router with SpeedBoost Firmware Version 7.2 WRT54GS (latest version). I'm trying to use it with a Sprint 645 series Modem. My IP address when you are connected to the router and the router connected to the Modem is 192.168.1.100 who my ISP said was ok to make it work. While it is just connected to my modem, it's the same thing except replace the 100 by 1. My ISP uses a measure of security where The Thing DHCP is 192.168.1.1 and so is the DNS server and default gateway and im not sure if this has something to do with it. I used the ping at a command prompt to make sure that I am connected to the router when its plugged up and it is. This is a new router. I have internet with Modem just perfectly. I tried to reset the router and that does not work-_-. I don't think it is important more because I tried to fix the many way people have told me and it didn't work, but I'll tell u in any case. When I put up the first router time I hung and lit everything at the beginning. Then I noticed that it says Run CD before to connect the cables... those who were not in the instructions but wtv... anyway resetting should have fixed or so I was told by other people on this forum. I use a laptop with Windows Vista, and I don't have access to a desktop computer in case I need a XD. I can connect to the router fine because I can access the Setup page... and I can connect wireless... The ONLY problem seems to be that the router will not connect to the Modem... for some reason of wtv-_ - I think that its because the entire security measure on the way to the DHCP and the DSN and the bridge are all 192.168.1.1, but that's just me. I'm sorry this is very long but I really want this problem-_ - I had this router for a month and becomes really annoying so please help . My ISP is Embarq. I ran the installation CD and I had all through the last step (standby router) after having connected the power supply to the wall for the router. Just, it is there forever and then says "error: 322 cannot find router or something like that." There are 3 steps to try to fix it. It says to make sure that the router is connected (it is), it is said also to make sure that u does not actually connect your old router, (I don't have a-_-) and then re-run Setup. and by the installer, I mean where u plug in all the cables in the right way. * sigh *.

  If you need anything else please ask.

  Your second post says "" ignore this "so I guess everyone thought that you set..."

  When you connect through your router that you have two instances of DHCP past... one is your DSL modem with router IP address on its WAN interface. The other is the router that gives your computer an IP address via the DHCP server on the router. The IP address of the modem gives your router is in the 192.168.1.0 network. Unfortunately, by default, the reange of Linksys routers LAN IP address is also in this range. For that to work, you must set your router 192.168.2.1 LAN ip, so that the LAN and WAN router interfaces are in different networks.

  To do this, unplug the DSL modem router, power it and your computer, and then connect the computer to the router by an ethernet cable. Turn on the router and the computer, and then go to 192.168.1.1. Change the LAN IP on router 192.168.2.1, save the configuration, and then restart the computer. Once the computer returns to the top, navigate to 192.168.2.1... you should be able to get to the router GUI configuration.

  Turn off the router and the DSL modem, connect the router to the modem via the Internet port using an ethernet cable, and then turn on the modem, then the router... you should be good to go...

• My computer crashed and I had to clean and reload windows 7 Professional. How can I reload the software from Adobe. I have connected on my Adobe account, but there is no record of my purchases.

  My computer crashed and I had to clean and reload windows 7 Professional. How can I reload the software from Adobe. I have connected on my Adobe account, but there is no record of my purchases.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• How to create e-commerce site using adobe muse from the beginning to the end, please

  How to create e-commerce site using adobe muse from the beginning to the end, please

  Mylenium, why comment you on the forums of Muse? I've never seen a useful comment on these forums. You seem to just upset against Muse all the time.

  in any case, definitely go with widgets Ecwid and J-26. They are the best.

• I have just reactivated Dreamweaver on a new computer.  How can I get the files FROM my website ON my computer so I can edit/update using Dreamweaver.

  I have just reactivated Dreamweaver on a new computer.  How can I get the files FROM my website ON my computer so I can edit/update using Dreamweaver?

  If your old machine still works, export your definition of original site to a portable player, copy in your new machine and then import the site definition to the new machine. The definition file will have the extension .ste

  Create an empty folder on your new machine.

  Define a 'new' web site on your new machine to point to the new local root folder.

  Log your server and download all of the subfolders and files in the folder root from the server to the new local root folder.

• How to connect to the HP Officejet 6500 wireless printer

  I recently bought the printer portable officejet 6500 from costco. Initially, I have it connected via a USB port on my laptop and follow the instructions in the CD. I also activated the wireless to the printer. Now, I'm trying to connect to the printer from my office laptop. I have not installed anything on my office laptop. I went into Control Panel, printers and tried to add this printer. I'm assuming that, given that the printer is already selected for the wireless, I thought that I'll be able to see that when I add a printer. When I tried to add the printer its asking me a URL. I tried to get the printer Network Setup page portable officejet 6500, but the URL does not work. I need to install the CD that came with the printer portable officejet 6500 on my offcelaptop to make it work? Any help would be appreciated.

  Thank you

  @hanleyn, I'd be happy to help you with this problem.

  You will need to go to your settings of the printer.

  1. Select network settings.

  2. Select the wireless configuration wizard

  After perform you these steps, you need to get on the computer and to update the IP address. (It would occur on the printer on the Network Configuration Page).

  Then go to the computer.

  1. click on Start Menu

  2. Select all programs

  3 select the HP folder

  4. Select the name of the computer

  5. click on the IP ADDRESS UPDATE or wireless configuration.

  6. put the new ip address in the place.

• Problem with TC loss of connection to the modem cable

  I have a TC of 2 TB which is connected to my ISP provided by cable modem. It worked fine for 3 months after the installation in December, but now all of a sudden it will lose its connection to the modem and we lose our wireless internet. We have replaced the modem cable and it does not solve the problem. I have to reset the TC 2 - 3 times a day. Nothing else has changed recently with regard to the network set up. that only changes were to specific devices that use the wifi connection, and this was always something changing, depending on the devices we use. Any thoughts? I'm not a savvy person tech, BTW.

  We need to ask a few questions in order to learn more on what the possible cause of the problem might be.  Please be patient with this. Thank you.

  What is the number and the model of the modem you are using right now?  We ask because some modems work better than others with Apple routers, and even if you have changed the modem, it could still be a model who does not get along well with the Apple router... or... you could say that the router from Apple does not get along well with the modem.

  How old is the TC? We ask because the life expectancy, on average, a time capsule is about 3 years.  After that, they tend to start losing connections to an ever-increasing rate.

  Who is your provider of Internet (ISP) Service?  We ask because most suppliers are in the active process of implementation of a new type of connection called IPv6 in their systems... and despite ISPS claiming that their system changes should cause no difficulties connection or interruptions system... which doesn't seem to be the case at all.

  We have seen an unusual number of reports from users who suddenly have problems with their ISP connection, when things were very well for many months before. That points directly to the IPv6 changes that ISPS are doing as the culprit. In some cases, there could be way to work around the problem, and in some cases, there is nothing to do but wait as the ISP to complete their changes and be everything to speed.